JVC HAS190BT Lightweight Flat Foldable Instruction Guide
- June 3, 2024
- JVC
Table of Contents
JVC HAS190BT Lightweight Flat Foldable
FCC
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For U.S.A
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that are deemed to comply without
testing of specific absorption rate (SAR).
This device complies with Part 15 of FCC Rules and Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of
this device.
ATTENTION:
The product you have purchased is powered by a rechargeable battery that is
recyclable. Please call 1-800-8-BATTERY for information on how to recycle this
battery.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation (JVC) is under license. Other trademarks and trade names are those of their respective owners.
WARNING
Hearing Comfort and Well-Being
- Do not play your personal audio at a high volume. Hearing experts advise against continuous extended play.
- If you experience a ringing in your ears, reduce volume or discontinue use.
Traffic Safety
- Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.
- You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
- Do not turn up the volume so high that you cannot hear sound around you.
CAUTION
To reduce the risk of electrical shocks, fire, etc.
- Do not remove screws, cover or cabinet.
- Do not expose this appliance to rain or moisture.
- Do not disassemble or modify the unit.
- Do not allow flammable, water or metallic objects to enter the unit.
For your safety
- In dryer air conditions such as in winter, you may feel some static shock when using the headphones.
- Should you start to feel ill while using the headphones, you should stop using them immediately.
- Be sure that your hair or any other objects do not get caught in the headband slider (adjuster) when adjusting the headband.
Avoid using the headphones
- in places subject to excessive humidity or dust
- in places subject to extremely high (over 40 °C or 104 °F) or low (under 5 °C or 41 °F) temperatures
DO NOT leave the headphones
- exposed to direct sunlight
- near a heater
To protect the headphones, DO NOT
- allow them to get wet
- shake them or drop them against hard objects
Precautions for use
- The ear pads will wear out earlier than the other parts even in normal use or in normal storage due to the material characteristics.
- For replacement of the ear pads, consult with the dealer where you purchased the headphones.
NOTE
If the System does not work correctly, charge the System to reset it.
SPECIFICATIONS
Designs and specifications are subject to change without notice.
PARTS (right side)
HOW TO USE
- When charging the headphones, be sure to use a USB to AC adapter with DC 5 V power output to avoid malfunction or abnormal heat generation.
When the headphones are almost out of charge they will beep every 4 minutes.
HOW TO PLAY MUSIC
DAILING
- This unit cannot guarantee operation of all of the remote control functions depending on the device type.
Note
- If no BLUETOOTH device is connected for about 5 minutes, the System automatically turns itself off.
About the LED indicator
Frequently Asked Questions
How do wireless digital JVC HAS190BT headphones operate?****
The transmitter sends out digital audio signals, which the receiver receives and converts into the analogue signals (sound) you hear through the headphones. A set of wireless headphones serves as the wireless receiver. However, your TV might or might not be the wireless transmitter.
How durable are the wireless JVC HAS190BT headphones?****
Before their battery runs out, true wireless headphones typically have a battery life of 3 hours or less. Charger cases are useful in this circumstance. Your headphones’ listening time can be increased by at least 5 to 6 hours with the use of a suitable charging case .
Are JVC HAS190BT wireless headphones digital or analog?****
Headphones are inherently analogue devices even if they are routinely coupled to digital audio sources. A digital-to-analog converter is typically required for headphone transducers in order to convert continually fluctuating analogue audio signals (electrical energy) into sound waves (mechanical wave energy).
How do I link my phone to JVC HAS190BT headphones?****
Swipe down from the top of the screen. Hold Bluetooth in your touch. If your attachment appears next to the name of your device under “Available media devices,” select Settings. If no accessories are shown under “Previously connected devices,” tap See all.
Are the wireless JVC HAS190BT headphones secure?****
Low quantities of nonionizing radiation are produced by Bluetooth devices. Moderate levels of this type of radiation exposure do not harm humans. The Food and Drug Administration (FDA) states that regular exposure to nonionizing radiation is “often recognised as harmless to humans.”
What are digital earbuds?****
Analog headphones can be utilised with a computer’s audio processor by connecting them to the port’s standard headphone jack. A USB port or digital audio out jack connection is used to send digital data to an audio processor included into digital headphones. There are various advantages, digital or analogue, whichever you choose.
Can JVC HAS190BT wireless headphones be overcharged?****
One cannot overcharge the earbuds. Any lithium-ion product should be able to handle this.
What technical foundations support the JVC HAS190BT wireless headphones?****
Wireless headphones work by receiving the modulated carrier wave from your smartphone. An analogue electrical waveform is created by demodulating the signal into digital data (0s and 1s). An analogue waveform is sent to the drivers in your headphones, which produce sound.
Why JVC HAS190BT wireless headphones are better?****
Due to the absence of extra wires and components, wireless headphones are more lightweight and portable. For people who are active, little wireless headphones are a great option. Weight can also impact comfort because lighter headphones typically put less pressure on users’ heads.
How are JVC HAS190BT headphones used?****
After making sure you are oriented correctly, put the in-ear headphones on. Put the tip of each ear on its respective side of your head. Pull your earlobe gently back with the aid of the other hand so that the ear tip can be inserted into your ear canal. Depending on your preference, place the wire either in front of or behind you.
How durable are JVC HAS190BT headphones?****
The answer to that query will change depending on the headphones you are wearing. However, a good set of headphones typically lasts between five and ten years.
Do you need to charge JVC HAS190BT wireless headphones?****
Most wireless earbuds have been charged. They are built with lithium-ion rechargeable batteries already. Don’t expect a 100% charge, though. As soon as you take your headphones out of the box, you must still charge them, as instructed by the manufacturer.
Does JVC HAS190BT wireless audio equipment function without WiFi?****
Bluetooth headphones can be used without WiFi and still work just fine.
How frequently should JVC HAS190BT Bluetooth headphones be recharged?****
If they are True Wireless headphones, which frequently need to be recharged in a case, you may anticipate your headphones to last anywhere from 5 hours to up to 40 hours on a single charge.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>