Jaz TEJZEARTWSEARBTB Wireless Stereo Earphones TWS User Manual

Jaz TEJZEARTWSEARBTB Wireless Stereo Earphones TWS

Wireless Stereo Earphones TWS

SPECIFICATION

• Wireless: V 5.1
• Sensitivity: 105dB
• Working range: 10m
• Speaker driver: 10mm
• Impedance: 32Ω
• Frequency: 20Hz – 20kHz
• Battery earbuds: 30mAh
• Charging case: 200mAh
• Box charge time: 3 hours
• Earphone charge time: 1 hour
• Working time: 5 hours Touch control
• Type-C connector

INSTRUCTION

• Charging the earbuds
  Insert the earbuds into the charging case, the LEDs will light up. Once charging is complete, the LEDs will turn off.

• Charging the case
  Insert the Type C connector of the supplied cable into the Type C port on the case and the other end into a USB port. The LED on the case will start flashing during charging.

• Powering on earbuds
  Remove the earbuds from the charging case: they will automatically turn on and pair with each other, or press both MLF buttons on the earbuds for 3 seconds.

• Turning off the earbuds
  Insert the earbuds into the charging case: they will turn off automatically, When the earbuds are not paired with a device and are out of the charging case, they will automatically turn off after 2 minutes, Or press the MLF button on one of the earphones for 5 seconds.

• Pairing with a device

1. Take the earbuds out of the charging case: they will automatically turn on and pair with each other.
2. Turn on Bluetooth on the device and search for “JAZ SILK TWS” in the list of available devices, then select it.
3. After the first pairing with the device (if Bluetooth is turned on) the earbuds will automatically pair each time they are removed from the case.

Commands

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>