JAZ WIZARD 10 Wireless Speaker User Manual
- June 5, 2024
- Jaz
Table of Contents
JAZ WIZARD 10 Wireless Speaker
SPECIFICATION
- Wireless: 5.0
- Working range: 10 m
- Power input : 5 V D.C. 1A
- Speaker power: 5W*2
- Radio frequency: 2.4GHz
- Impedence: 4Ω
- Frequency: 100 Hz-15 kHz
- Battery capacity: 1800mAh
- Standby time: 30 days
- Charge time: 2.5 hours
- Working time: 5 hours
INSTRUCTION MANUAL
- ON/OFF button
- Play/Pause + Answer/Resume
- Previous track + Volume up
- Next track + Volume down
- USB flash drive socket
- Charging socket
- TF card slot
- AUX connector
Recharge the speaker: insert the cable provided into the socket(6) and the red LED will light up. When fully charged, the LED will turn off. Turning on the speaker: press the button (1) for a few seconds, then hold down for two seconds to select Bluetooth® or AUX mode.
Pairing Bluetooth®: to pair the speaker with a Bluetooth device, hold down the ON/OFF button (1) for about two seconds; a voice message will confirm Bluetooth® activation and the LED will quickly flash blue at the same time. The speaker will now be visible as ‘JAZ WIZARD 10’ on your smartphone: if prompted, enter the password 0000. Once the connection has been made, the blue LED will stay on. The blue LED will flash slowly during playback.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>