Jackery JSG-1500B Portable Power Station Explorer 1500 User Manual
- June 5, 2024
- Jackery
Table of Contents
- Jackery JSG-1500B Portable Power Station Explorer 1500
- Package List
- Product Inspection
- PRODUCT INFO
- Specifications
- HOW TO RECHARGE THE POWER STATION & RECHARGE TIMES
- HOW TO USE THE POWER STATION
- Other
- GIVE YOUR APPLIANCES MORE RUN TIME
- Troubleshooting
- FAQ
- PRODUCT GUIDELINES
- WARRANTY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Jackery JSG-1500B Portable Power Station Explorer 1500
Package List
Check that you received all accessories {Car Charger, AC Charger, 2*Solar Charge Adapters, and User Manual). If any charger cables are missing, please feel free to contact us at hello@jackery.com.
Product Inspection
- Check to see that you have received the correct model.
- Check the appearance of the product first to see if there is damage or cracks.
- Test the power station’s input and output function.
Note : Before using your new Jackery Explorer 1500, it is important to fully charge it by plugging it into a suitable power outlet.
PRODUCT INFO
Pie of Input & Output Ports
Specifications
HOW TO RECHARGE THE POWER STATION & RECHARGE TIMES
Before use or storage, plug your Explorer 1500 into the wall until it is fully charged. If the LCD screen shows less than 20% capacity, plug it into a power source, like an AC outlet or a solar panel, as soon as possible.
How to Use the SolarSaga 100W to Charge the ElS00
Jackery Recommended Solar Setup: Use at least two SolarSaga lOOW solar
panels to charge the E1500. Single SolarSaga 100W for the Explorer 1500 Car
Charger: l00W Max Around 15.5 Hours One SolarSaga lO0W solar panel (not
included) can quickly charge the Explorer 1500 in 18 hours.
Solar recharging steps:
- Find the DC interface on the back of SolarSaga 100W;
- Connect the DC intertace with the adapter(included), and then plug it into the DC input of Explorer 1500.
Two SolarSaga 100W for the Explorer 1500
Two SolarSaga 100W solar panels (not included) can quickly charge the Explorer
1500 within 8.5 hours.
Solar recharging steps:
- Find the DC interface on the back of SolarSaga 100W;
- Connect the DC interfaces of 2″SolarSaga 100W with the Solar Charge Adapter;
- Connect the Solar Charge Adapter with the DC input of Explorer 1500.
- You can plug two sets of two SolarSaga 100W panels into both DC inputs of the Explorer 1500 for double the solar charging speed (4″ SolarSaga 100W panels tota).
HOW TO USE THE POWER STATION
Starting the Explorer 1500
Power
LCD Screen Button
Press the power button to check the remaining battery.
AC/ DC /USB Button
Turn on each output by pressing its power button. When an output type is not
in use, it is important to turn it off to save battery power.
Power Level Percentage
When the remaining power is at 20%, the “20%” icon, as well as the low battery
icon will light up on the display screen for 30 seconds. If the display is set
to be on for more than 30 seconds, the icons will always be on. When the
remaining power is at 5%, the “5%” icon, as well as the low battery icon will
light up on the display screen the whole time. If the product is being
recharged in a low battery condition, the remaining power will increase to the
normal display condition.
Output Power (W)
Before turning the power on, ensure total power consumption does not exceed
1800W.lf the Jackery Explorer total output exceeds 1800W, it will shut off.
Display
The normal Auto-Power-Off-Display time frame is 30 seconds. If you would like
to set the display on more than 30 seconds, please double press the DISPLAY
button. The other way around, if you would like to reset back to the normal
time frame, just simply press once the DISPLAY button.
Low & High Temperature Alarm
The ElS00 can power your devices in temperatures ranging from -10~40 °c (14~
104 °F). If your working temperature is outside this range, the unit may stop
working. The ElS00 should be recharged in ambient temperatures between 0~40 °c
(32~ 104 °F).
Time reminder
The remaining power time of both charging and recharging is displayed with
only has two digits – up to 99 hours. When the remaining power time is less
than 99 hours, it will be displayed as it is. This can also be used as the
remaining power countdown method.
Low Power Mode
Press the AC SWITCH and DISPLAY button together the same time to turn on the
Low Power Mode for reducing power consumption. On the right side, above the
battery power percentage display, a small icon will light up. On the Regular
Power Mode, the product will turn off automatically after 12 hours without
using, but the Low Power Mode WILL NOT TURN OFF. If there is no need to use
the Low Power Mode, it can be turned off by pressing the AC SWITCH to avoid
power waste.
Other
Fan Operating Principle
When the AC power is turned on, the fan will not automatically run. The ElS00
uses an intelligent temperature control that only uses the fan when needed to
cool the unit.
How to reset the Explorer 1500
Please hold the display power button and USB button simultaneously for at
least 13 seconds to reset the battery.
When does the power station need to be reset?
If the power station is not working correctly, resetting the battery is the
first troubleshooting step and may solve the problem.
Note: Turn on each output by pressing its power button. When an output type is not in use, it is important to turn it off to save battery power.
@|
Solar Charging Indicator
---|---
©|
AC Wall Charging Indicator
00′|
Car Charging Indicator
8|
Low power output
|
(!)
| Low-Temperature and High-Temperature Indicator.The E1500 should be used in
ambient temperatures between -10~40 °c (14~104 °F).
@| Low Battery Indicator: Recharge the battery to
---|---
.
.
|
Recharging Indicator
|
Discharging Indicator (The battery is being used.)
e|
AC Power Indicator (Inverter is being used to power AC devices)
0| When the Exglorer 1500 is being charged, the orange circle aroun the battery percentage will light up clockwise. When charging other devices, tfie orange circle will remain lit.
The Explorer 1500 can be recharged when the input power is within 12-3
GIVE YOUR APPLIANCES MORE RUN TIME
Note: The running time of the ElSOO for the following equipment was tested in the laboratory, which has strict controls on temperature. The working hours can also be affected by many other factors. The actual working time = 1534.68Wh* 0.85 / operating power of your device in watts.
Charging
For inductive load devices:
-
What is the inductive load device?
Inductive loads are found in devices like motors, solenoids, contactor coils, compressors, and speakers. When turned on, the device’s current lags behind the voltage. This causes a large spike in power. -
An inductive load will use up to 3X its normal power usage when it starts.
-
When checking to see if the ElSOO can run a device, check to see if it has an instant start power rating.
Troubleshooting
If there is a problem when using the AC charger cable or DC car charging cable:
- Check if the charger cable and the power station are reliably connected and if the charger indicator light is on.
- Make sure you are using the correct Jackery charging cable.
- Check to see if the charging indicator is on and the charging power is shown on the display.
- If the AC cable is not working, try using the car charging cable to see if the power station will charge. This troubleshooting is also fit for DC input failure.
Using Jackery solar panel to charge the ElS00:
- Check all connections are secure.
- Use the provided AC charger to see if the power station will charge.
- Use a soft cloth to clean the dust and dirt off of the solar panel.
- Test the solar panel under bright sunlight at midday. Ensure there are no shadows cast on the panel. Plugin and unplug the panel several times.
Using other brand solar panel to charge the ElS00:
- Check all connections are secure.
- Use the provided AC charger to see if the power station will charge.
- Use a soft cloth to clean the dust and dirt off of the solar panel
- Test the solar panel under bright sunlight at midday. Ensure there are no shadows cast on the panel. Plugin and unplug the panel several times.
If ElS00 can be recharged by the AC charger and not the solar panel, there is probably nothing wrong with the ElS00. The solar panel may be the issue.
Problem with Output (AC/DC/USB)
When the power station has something wrong with the AC/DC/USB output, please
hold the display power button and USB button simultaneously for at least 13
seconds to reset the battery.
Problem With LCD Screen
Hold the display power button and USB button simultaneously for at least 13
seconds to reset the battery.
Customer Support:
If there are some problems with the power station, please feel free to contact
us at hello@jackery.com. To provide you with the
fastest response possible, please provide the following information in your
email. Amazon order number/ Web order number+ issue+ S/N code+ Pictures /video
if needed.
FAQ
-
Ql: What devices can Explorer 1500 power?
A: The AC output port can charge/power devices that operate at less than 1800 watts. -
Q2: Can the Explorer 1500 be charged while using?
A: Yes, the Explorer 1500 supports pass-through charging. But we don’t suggest it because doing so will cause damage to battery life. -
Q3: Can the E1500 be used as UPS?
A: No, the El500 can’t be used as UPS. You need to press the power button to turn on the AC/USB /DC output. Therefore it can’t turn on and off automatically. -
Q4: How to know the working times for my device?
A: Working time = 1534.68Wh* 0.85 / operating power of your device (watts). -
Q5: Does the Explorer 1500 include a built-in MPPT controller?
A: All Jackery power stations have a built-in MPPT controller. -
Q6: How do I know the Explorer 1500 is charged?
A: To check the charge level of the Explorer 1500, refer to the LCD Battery Display. -
Q7: Can I keep this charged up by keeping it plugged in all the time in case of power outage?
A: Yes, you can keep the battery plugged in to charge. Keeping it plugged in won’t cause damage to the battery. -
QB: Can I use it indoors?
A: Yes, the Explorer 1500 is safe to use indoors. -
Q9: Why does it take so long to charge the power station from 99% to 100%?
A: When the battery is low, the charging power is greater, so the battery charges faster. As the battery reaches a higher and higher charge, the difference between the charging voltage and the battery voltage becomes closer. This means the battery will charge at a slower and slower rate as it approaches 100%. -
Ql0: Can I find any video about recharging the Explorer 1500?
A:Yes! Follow the instructions below to see the product video:- Go to jackery.com.
- Click the “Support”, and then choose”FAQ.”
- Find the appropriate video in the “Product Video” section.
-
Qll:Are the output ports regulated, and if so, which ones are regulated?
A: All output ports of Jackery power stations are regulated. The voltage won’t change when the battery power decreases. -
Q12: Are the batteries inside replaceable?
A: No, the batteries inside of Jackery power stations are not replaceable.
PRODUCT GUIDELINES
- Please recharge it every 3-months to keep the battery power above 50% if you don’t use it.
- It’s suggested to recharge the battery before the power drops below 15%.
- Only charge the ElSOO within an ambient temperature of 0-40°C (32-104°F). Discharge temperature is -10-40°C (14~ 104 °F). Storage temperature is 1 year at-20~25 °c (-4~ 77 °F), 3 months at-20~45 °c (-4~ 113 °F), and 1 month at -20~60 °c (-4~ 140°F).
- Please keep the battery laid flat during use, charging, and storing.
WARRANTY
Note: We only provide the warranty for the buyer who purchased on Amazon (Jackery Inc) , Jackery website or local authorized dealers.
Limited Warranty
Jackery Inc. warrants to the original consumer purchaser that the Jackery
product will be free from defects in workmanship and material under normal
consumer use during the applicable warranty period identified in the ‘Warranty
Period’ section below, subject to the exclusions set forth below.
This warranty statement sets forth Jackery’s total and exclusive warranty
obligation. We will not assume, nor authorize any person to assume for us, any
other liability in connection with the sale of our products.
Warranty Period
The warranty period for Jackery power products is 24 months. In each case, the
warranty period is measured starting on the date of purchase by the original
consumer purchaser. The sales receipt from the first consumer purchase, or
other reasonable documentary proof, is required in order to establish the
start date of the warranty period.
Exchange
Jackery will replace (at Jackery’s expense) any Jackery product that fails to
operate during the applicable warranty period due to defect in workmanship or
material. A replacement product assumes the remaining warranty of the original
product.
Limited to Original Consumer Buyer
The warranty on Jackery’s product is limited to the original consumer
purchaser and is not transferable to any subsequent owner.
Exclusions
Jackery’s warranty does not apply to:
- Misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in Jackery’s current product literature.
- Attempted repair by anyone other than an authorized facility.
- Any product purchased through an online auction house.
- Jackery’s warranty does not apply to the battery cell unless the battery cell is fully charged by you within seven days after you purchase the product and at least once every 3 months thereafter.
Customer Support: hello@jackery.com
To obtain warranty service, contact our customer service team at
hello@jackery.com.
How to Register the Item and Get the Warranty?
- Go to jackery.com.
- Each sentence should have a period.Fill in the information form, and then submit.
- You will get a 36-month warranty in total when you finished.
- Contact hello@jackery.com via our site by following the instructions below.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>