Giraffe Tools P106-G30 PRESSURE HOSE REEL Washer User Manual

Giraffe Tools P106-G30 PRESSURE HOSE REEL Washer

Product Information

Thank you for choosing Giraffe Tool’s pressure hose reel. Before using the pressure hose reel, please read the following installation instructions and refer to them when necessary.

WHAT’S INCLUDED

1. x Pressure Hose Reel with 100ft Hose
2. x High-Pressure Gun
3. x Wall Fixed Base
4. x Bubble Spray Bottle
5. x Water Inlet Adapter
6. x Self Tapping Screws: Φ8×70
7. x Expansion Anchor Bolts: Φ12×60
8. x Owner’s Manual
9. Quick-Connect nozzles(0°, 15°, 25°, 40° )
10. x 5FT Lead-in Hose

OPEN-BOX CHECK

1. Confirm that the above parts are included in your package.
2. Check for any scratches or damage done to the product.
3. If your product is missing parts or has visible damage upon receipt, please contact Giraffe Tool’s customer service team.
   Note: If you notice an initial aroma upon opening your package, this is due to the sealed environment in which the package travelled overseas.

Safety Rules

Safety “Must Nos”

1. DO NOT use the appliance with inflammable or toxic liquids, or any products which are not compatible with the correct operation of the appliance. EXPLOSION OR POISONING HAZARD
2. DO NOT direct the water jet towards the unit itself, electrical parts or other electrical equipment. ELECTRIC SHOCK HAZARD
3. DO NOT direct the water jet towards people or animals. INJURY HAZARD
4. DO NOT touch the plug and/or socket with wet hands. ELECTRIC SHOCK HAZARD
5. DO NOT allow children or incompetent persons to use the appliance. INJURY HAZARD
6. DO NOT use the appliance if the electrical cable is damaged. ELECTRIC SHOCK AND SHORT CIRCUIT HAZARD
7. DO NOT use the appliance if some important components like electrical cable, high-pressure hose, gun and safety devices etc are damaged. EXPLOSION AND ELECTRIC CONTAMINATION HAZARD
8. Maintenance and/or repair of electrical components MUST be carried out by qualified staff. ACCIDENT HAZARD
9. Shut down the appliance, and cut the power supply and water supply. Then, discharge the residual pressure by triggering the gun before disconnecting the unit hose. INJURY HAZARD
10. Before using the appliance, CHECK every time that the screws are fully tightened and that there are no broken or worn parts. ACCIDENT HAZARD
11. ONLY USE detergents that will NOT corrode the coating materials of the high-pressure hose/electrical cable. EXPLOSION AND ELECTRIC SHOCK HAZARD
12. ENSURE that all people or animals keep a minimum distance of 16yd. (15M) away. INJURY HAZARD
13. The unit should be fixed when it’s working.
14. This appliance can NOT be stored in a damp environment;
15. When stopping the appliance, shut the appliance’s switch before pulling plug out;
16. Use only original or manufacturer-approved spare parts for safety sake
17. Total Stop (motor stops when trigger released) does NOT always keep effective and the appliance can NOT be at Total Stop for long time. If ineffective ( for inner seal damaged, local voltage too  low etc), MUST turn off the switch to stop the machine from working;

Caution – Danger!

1. Do not tamper with or adjust the safety valve setting.
   Safety valve and/or pressure limiting valve. The safety valve is also a pressure limiting valve. When the gun trigger is released, the valve opens and the water recirculates through the pump inlet or is discharged onto the ground.

2. Safety catch (see Connection of gun and hose) Prevent accidental spraying of water.

3. Air outlet on plastic case and it should NOT be blocked during operation, or fire or electric shock hazard is possible

USING STEPS

Fix Wall Base

1. Chosen a location for your pressure hose reel, follow figure 1 of the wall base template to mark the location of 4 holes for drilling, or place the wall base itself up to the wall to mark the location of the screw holes for drilling.
2. Use a 1/2″ or 12mm diameter drill bit to drill the 4 marked holes. Hole depth is important. You may choose to measure a 1.96in-depth on the drill bit itself and mark it with a small piece of tape so you know when you’ve drilled the appropriate depth into the wall. Using a correctly sized drill bit will ensure a secure installation of the wall base. To make sure the wall anchors have a secure fit, you may choose to drill a slightly smaller hole first, then size up if it proves too small for the wall anchor.
3. Hammer the wall anchors into the 4 pre-drilled holes.
4. Place the base to the wall, aligning the wall anchors with the designated holes in the wall base. Screw in the screws with either a socket set or a Phillips screwdriver.

Way to Use

1. Fixing the matching end of the hose firmly into the gun handle. See Figures 2 and 3. Tighten the connector by hand only. Loosen the high-pressure hose to avoid twisting.

2. Connect the lance to the pressure gun. See figure 4.

3. Push the trigger lock button, and ensure the trigger is in the “OFF” position. See Figures 5 and 6.

4. Check the water inlet adapter to make sure it is free of blockage.

5. Fixing the water inlet adapter to the water inlet of the unit. See figure 7. Connect your water supply hose to the water inlet adapter.

6. Turn the water supply on, making sure that the tap is fully open. Release the trigger lock.

7. Trigger the gun to expel the air in the unit before its works.

8. Turning the ON/OFF switch to the “OFF” position marked 1.

9. Put the plug into the socket of the main electric power.

10. Choose the appropriate size nozzle for your work. Use your hands to connect the quick-connect collar slightly downward, the required nozzle will be stuck in the quick-connect collar, release hands and hear the sound of the click, indicating that the nozzle is successfully connected. See figure 8.

AFTER USE TIPS

How to Retract
In order to enhance your experience with Giraffe Tools and extend the life of the pressure hose reel. First, when the cleaning task is done, please turn to the state of “OFF”, and then turn off the water supply. Second, when the high- pressure hose is filled with water after use, its automatic retracting function will be greatly affected. Please press the handle first to release pressure and drain the excess water. Figure A for your reference.

Third, after releasing the pressure, please hold the pressure gun and pull the pressure hose a little out, and then, retract the pressure hose to the whole reel. Figure B for your reference. Last, store your pressure gun.

Storage During Winter

1. Switch to the state of “OFF”
2. Turn off the water supply tap
3. Remove the plug from the socket
4. Discharge the residual pressure from the gun until all the water has come out of the nozzle
5. Drain and wash out the detergent tank at the end of the working session. To wash out the tank, use clean water instead of the detergent
6. Roll the pressure hoses
7. Engage the gun safety catch
8. To better maintain the performance of the pressure washer, please dismantle the pressure washer and store it indoors during the winter
9. When you use it again, please make sure to check whether there is any icing in the water hose first. If it is partially frozen, do not pull out the high-pressure hose, please wait for it to melt before using it normally

PROBLEMS SOLUTION

Pressure drops during use

| Water intake from external tank| Connect appliance to the mains water supply
Intake water too hot| Reduce temperature
Nozzle clogged| Clean nozzle

O-ring to one-way valve broken

| Replace the broken component
Intake filter dirty| Clean filter

Motor “sounds” but fails to start

|

Insufficient power supply

| Check that the voltage of the mains power supply line is the same as that on the plate
Voltage loss due to use of extension cable| Check characteristics of extension cable
Appliance not used for long period of time| Contact your nearest Authorized Service Centre

Problems with TSS device

| Contact your nearest Authorized Service Centre

Water leakage

|

Seals worn

| Have the seals replaced at your nearest Authorized Service Centre
Safety valve tripped and discharging| Contact an Authorized Service Centre

Oil leakage

|

Seals worn

| Contact your nearest Authorized Service Centre

Motor started when gun is not triggered

| Nozzle clogged| Clean nozzle
---|---|---

High pressure system or pump hydraulic circuit not watertight

| ****

Contact your nearest Authorized Service Centre

Appliance works intermittently

| ****

Safety valve soften or nozzle clogged

| Clean the nozzle or contact your nearest Authorized Service Centre
No water out when triggering the gun| ****

Nozzle clogged

| ****

Clean the nozzle

WARRANTY

Warranty Period: TWO (2) years

Additional Legal Rights for Consumers
For consumers who are covered by consumer protection laws or regulations in their country of purchase or, if different, their county of residence, the benefits conferred by our limited warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations, including but not limited to these additional rights.

WHAT IS COVERED BY THIS WARRANTY?
This warranty covers each product and warrants them to be free from defects in workmanship, under normal use and service, for the defined period of time from the date of purchase by the first end-user. Under this warranty, Giraffe Tools will repair or replace, at its option, any unit that fails to perform according to Giraffe Tools’ published specifications during the warranty period.

WHAT IS NOT COVERED BY THIS WARRANTY?
This Warranty does not apply to damage caused by accident, abuse, misuse, fire, earthquake, or other external cause, or to cosmetic damage, including but not limited to scratches, dents and broken plastic on ports unless failure has occurred due to a defect in materials or workmanship.

ACQUIRING WARRANTY SERVICE
Should the product prove to be defective within the warranty period, return the product to the retail store you purchased the product(s), and Giraffe Tools will at its option, repair or replace the product, to whatever extent Giraffe Tools deems necessary to restore the product to proper operating condition, without any charge to you.

RECOMMENDED PRODUCTS

WE WILL DO THE HEAVY LIFTING
To purchase Giraffe Tools products and more, visit giraffetools.com or search for Giraffe Tools on Amazon.com.

References

• Amazon.com
• Giraffe Tools | Your Best Time Saver Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>