PWAY

PWAY HDMI Extender 1080P, Extend Audio Video Up to 50m Over Cat6

Specifications

• CONNECTOR TYPE : HDMI, RJ45
• CABLE TYPE : USB, HDMI, Ethernet
• COMPATIBLE DEVICES : Laptop, Monitor, Personal Computer
• BRAND : PWAY
• CONNECTOR GENDER : Male,
• CABLE LENGTH: 10 feet
• PACKAGE DIMENSIONS: 4.2 x 4.1 x 1.1 inches; 3.21 Ounces

Introduction

Over an Ethernet cable, send HDMI audio-video up to 50 meters. Cat6/7 has a maximum range of 50 meters, while Cat5e has a maximum range of 40 meters. Full HD video 1920×1080@60Hz is supported, and audio and video are delivered synchronously. It’s a lot easier to connect. No more HDMI cables are required with this HDMI male to RJ45 female adapter. This is a POC function. Ethernet- based power supply. To start the gadget, connect the source (computer, laptop) and the TX using the provided USB cable.

WHAT’S IN THE BOX

• 1x PW-HT238P Extender(set)
• 1x User manual
• 1x USB Power Cable
• our worry-free 12-month warranty
• friendly customer service

HOW TO SET UP

• Connect the HDMI signal source to the HDMI Transmitter (DVD, STB, etc.).
• Connect CAT5e or 6 cables to both the transmitter’s Ethernet port and the receiver’s Ethernet port. (The cables must adhere to the EIA-TIA 568B standard.)
• Plug the HDMI display into the receiver (such as an HD-LCD or HD-DLP).

HOW TO USE

Connect the HDMI Extender TX to an HDMI source, such as a graphics card or a Blu-ray player (Transmitter). Connect the HDMI Extender RX to the HDMI display (Receiver). Connect both devices’ Ethernet ports with a Cat5e / 6 cable.

HOW TO RESET

1. Disconnect all cables and reconnect them in the sequence listed below:
2. Connect the HDMI cable to the display;
3. Connect the RJ45 cable to the RX;
4. Connect the RJ45 to the TX;
5. Connect the source HDMI output to the TX;
6. Connect the 5VDC power supplies;
7. Reset the RX;
8. Reset the TX.

HOW TO TROUBLESHOOT

• Ensure that all wires are securely attached to the input and output ports.
• Ensure that all Cat cables are properly terminated, i.e., T568 A or B. (Do not use flat cables)
• Ensure HDMI cables are HDMI Version 1.4 compliant when using extenders.

Frequently Asked Questions

• How do HDMI extenders that are wireless work?
  A transmitter and receiver convey data over an ethernet cable or coaxial cable with a regular HDMI extender, while a wireless HDMI extender leverages the frequency waves that are all around us. It’s similar to how routers offer a Wi-Fi signal that allows our computers to communicate wirelessly with other devices and servers.

• Is it true that HDMI extenders are ineffective?
  These are prone to failure from time to time. The power supply should be replaced. Make sure the power source is the right voltage for your gadget, as providing the incorrect voltage would almost certainly cause damage.

• What is the best way to send HDMI via Wi-Fi?
  A wireless HDMI transmitter/receiver or a streaming stick like Chromecast or Roku are the best options to send video wirelessly. Simply connect the transmitter and receiver to your source and destination for wireless HDMI.

• Why is HDMI constantly cutting out?
  A faulty connection between the HDMI cable and the device is the most common cause of a problem. This is frequent if you plug and unplug the cable on a regular basis.

• What’s the deal with my HDMI adaptor not working?
  If the corresponding driver for your USB to HDMI adapter isn’t installed correctly, it may cease working. In this case, you should attempt to download and install the most recent driver at the same time. You can manually download the driver from the manufacturer’s website (the site is often mentioned in the user manual).

• Why isn’t my HDMI connection working?
  Make sure the HDMI connection setting on your Android phone or tablet is enabled if you wish to connect it to the TV. Go to Settings > Display Entries

  HDMI Connection to do so. Enable the HDMI connection if it isn’t already.

• When I plug in HDMI, my TV says there’s no signal.
  The “no signal error” on a TV is caused by a malfunctioning graphics driver, a broken HDMI port, or the use of an incorrect HDMI connection.

• Is it worthwhile to invest in HDMI extenders?
  The AV Access HDMI Extender is one of the best versions on the market for watching 4K material. It’s one of the few options for streaming 4K material over Cat 7 cable, and the fact that it’s HDCP 1.4 compliant ensures that you’ll never run into any compatibility issues.

• Do HDMI extenders degrade the picture quality?
  Your signal will be degraded if you use an HDMI coupler. When cables are tugged, the HDMI connector will loosen and perhaps shatter. An HDMI Balun kit is the ideal choice because it uses Ethernet instead of an HDMI cable to carry the signal between your devices.

• How can I use HDMI to link my phone to my TV?
  A USB-C to HDMI adapter is the simplest solution (Opens in a new window). If your phone has a USB-C connector, you can use this converter to connect to your TV by plugging an HDMI cable into the adapter. HDMI Alt Mode, which allows mobile devices to output video, must be supported by your phone.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>