Sandia 90-0000 Gen Air Mover Instruction Manual

Your Ultimate Choice in
Profitable Cleaning Performance!
Gen-Air Air Mover
By Sandia Products

90-0000 Gen Air Mover

Model No. 90-0000

Please fill out the following information:
Model No:………….
Serial No:………….
Distributor Name:………………
Distributor Phone No:………….
Date of Purchase:………….
Safety, Operation and Maintenance
Manual with Parts List Please read before use!
1/2 HP, 3-Speed Motor
REGISTER  YOUR MACHINE ONLINE!

Important Information and Safety Instructions
Register your Machine at www.sandiaplastics.com/registration.aspx
Serial No:……..

Dear Valued Customer,
Congratulations on the purchase of your Gen-Air Air Mover! The world of carpet cleaning is becoming more high-tech and competitive and we strive to provide you with the most innovative products. Our air mover is yet another example of this, bringing a new dimension to carpet and upholstery cleaning with its cutting-edge features, quality and value.
Please review this manual, paying careful attention to the Safety Instructions section.
Keep in mind that any unnecessary damage, neglect or abuse of this machine will void your warranty. You can be confident that simple maintenance will ensure that your air mover provides quality performance for many years to come.
If warranty questions arise, please consult your manual or contact your distributor.
Should you have any questions regarding maintenance, replacing parts or ordering parts, please call an authorized distributor.
Before you begin using your air mover, thoroughly review the Owner’s Manual.
Again, congratulations on the purchase of your Gen-Air Air Mover!

Machine Schematic Drawing and Parts List

Safety Instructions

READ THIS MANUAL BEFORE USING AIR MOVER. KNOW THE PROPER OPERATION, CORRECT APPLICATIONS AND THE LIMITATIONS OF THIS EQUIPMENT BEFORE USE.

Reduce the Risk of Fire, Electric Shock or Injury:

• This air mover must be grounded. See section 3.0 for more details.

• This air mover is designed for commercial use. It is constructed for indoor use and its not intended for any other use.

• DO NOT use in flammable or explosive areas. Never operate this air mover near flammable or explosive dusts, liquids or vapors.

• DO NOT use with damaged cord or plug.

• DO NOT use outdoors. Do not expose to rain. DO NOT use in standing water.

• DO NOT use air mover if it not operating properly. Report problems to a supervisor.

• DO NOT use with an extension cord.

• Wipe the chassis of the air mover to clean. Use vacuum to remove dusts from fan blades. DO NOT wash with flowing water.

• DO NOT use this air mover unless trained.

• DO NOT run any machines over the cord.

• DO NOT pull Air Mover by cord or plug.

• DO NOT pull cord around sharp edges or corners.

• DO NOT unplug by pulling on the cord.

• DO NOT stretch cord.

• DO NOT handle plug with wet hands.

• Keep cords away from hot surfaces.

• DO NOT allow air mover intake to collect burning or smoking debris, such as cigarettes, matches or hot ashes.
  DO NOT move air with flammable or explosive chemicals.

• Keep the air intake free of debris. DO NOT operate with the intake covered or blocked.

Returned Material Authorization (RMA) Procedure
Original purchaser must contact the manufacturer to follow correct RMA/warranty procedures. Must include a copy of RMA Sheet enclosed in the box with returned item.
No returns shall be authorized unless the proper RMA procedures are followed. It is the responsibility of the distributor to repair the customer’s equipment as soon as possible. If the distributor does not have the facilities to repair the equipment, it may be shipped or taken to an authorized service center for repair.
Customer must contact the manufacturer prior to working on or changing out any parts, etc. Manufacturer must issue an RMA Sheet containing approved labor time and replacement parts. Do not send parts or equipment back to manufacturer without an RMA
and approval. No labor will be paid for, nor part costs paid for or reimbursed that have not been previously approved by manufacture. All warranty work must be approved and authorized to qualify and appropriate warranty procedures must be followed.

Electrical Power
This air mover operates on a 15 amp nominal 115 V, 60 Hz, A.C. power circuit. The amp, hertz and voltage ratings are listed on the motor spec label found on each air mover. Using voltages above or below those indicated on the spec label will damage the motor.
Always check your local voltage requirements.

Grounding Instructions

This air mover must be grounded while in use to protect the operator from electric shock.
This machine is built with a 3-wire cord and a 3-prong grounding-type plug (Figure 1) to fit a properly grounded receptacle.
Before using this machine, make sure a properly grounded, 3-hole electrical outlet is available. If not available, as in some older facilities, use an adapter for connecting a 3-prong plug to a 2-prong receptacle (Figure 2) to ground the outlet chassis. IMPORTANT: This adaptor may not be used in Canada.
IMPORTANT: Never cut off the grounding prong for use in a 2-prong outlet. By doing so, you have cut off your protection from electrical shock. Never assume that all 3-hole outlets are properly grounded. Check before use.
Never assume that an adaptor connection (as shown in Figure 2) is properly grounded.
Check the outlet with a ground fault interrupter device which quickly indicates if a ground is connected.
Correct a faulty grounding before proceeding.
Extension Cords are Not Recommended
The air mover is built with a 20-foot, 16/3-gauge safety power cord. Use of any extension cords is NEVER RECOMMENDED.

Operating Tips

• For indoor use only.
• Adjust the air mover to the desired position for operation by tipping the machine onto one of the three flat faces of the heavy-duty plastic chassis. The balanced machine design assures stable positioning.
• Plug the power cord into a grounded outlet.
• This air mover has three (3) power settings controlled at the side of the machine. Turn the power knob on the side of the air mover to the desired speed.
• 1 = 780 RPM, 2 = 1000 RPM, 3 = 1500 RPM. To turn the air mover off, turn the power knob to the off position.
• Never pull on the cord to disconnect or turn off the motor.

Storing the Air Mover

• Wind the cord around the carrying handle.
• Store in the upright position in a dry area.
• Check and clean after each operation. Remove soil and chemical buildup. Use vacuum and soft brush to remove soils from motor vents and fan blades.
• Wipe the outside chassis with a mild cleaner. Never wash the outside of the air mover with flowing water. Make sure that the air intakes are not blocked.
• Check switches for proper operation. Call a trained electrician to repair or replace damaged cords and plugs.
• Report problems and repair promptly.

Troubleshooting Guide

Never operate this air mover when the equipment is not performing as expected or when any part is visibly damaged. When repair is needed, take the equipment to an authorized service center.
Air Mover will not run

• Circuit breaker tripped in building. Check and reset.
• Equipment unplugged. Check plug at wall and plug in.
• Power cord failure. Seek authorized repair services.
• Motor sparks or smokes. Seek authorized repair services.

High vibration

• Air Mover fan blades are damaged or broken. Seek authorized repair services.
• Motor bearings are worn. Unplug the air mover and spin the fan blades. If the spinning causes noise or restricted movement, replace the air mover with new equipment.

New Equipment Warranty
Lifetime on body, 1-year on all electrical components.
Warranty Policy
All equipment is inspected and tested before shipping from the manufacturer. All parts are warranted to be new and free from defects in workmanship and material, under normal use to the original retail purchaser. This warranty limits manufacturer’s liability for defects in workmanship or materials to replacement of defective parts only.
Manufacturer accepts no liability for incidental or consequential damages arisen from the use of any equipment, defective or not. This warranty is in lieu of all expressed or implied warranties and is extended only to the original retail purchaser. Manufacturer sales and service representatives are not authorized to waive or alter the terms of this warranty, or to increase the obligations of the manufacturer under the warranty. Parts replaced or repaired under this warrant are warranted for the remainder of the original warranty period.
Freight charges and travel charges to and from the service provider shall be covered for ninety (90) days from the purchase date. After the ninety (90) day period, these freight charges shall be paid by the equipment owner, subject to manufacturer discretion. Certain circumstances may require additional consideration. No travel charges shall be covered after ninety (90) days.
Manufacturer covers up to 1-year (365 days) of service labor at MANUFACTURER’S
calculated hourly labor rate/repair time when performed by a manufacturer’s authorizedservice provider.
Ultimately, labor reimbursement costs are at the discretion of the manufacturer. After 1-year, original retail purchaser is responsible for all labor costs with no manufacturer reimbursement.
Manufacturer charges a 15% restocking fee for any items that are being returned to stock.
Items must be new, unused and free of damage. Only good for up to 1-year (365 days).
After 1-year, manufacturer does not accept the return of any item(s) for a reimbursed price.
Authorized warranty replacement parts need to come directly from the manufacturer.
Any use of any other parts will void warranty. Sandia Products, Inc. does not reimburse for parts used by the customer that were not supplied directly for the machine under warranty.

References

• Sandia Products | Carpet and Floor Care Machines | Ultimate Solutions
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>