WMD C4RBN 4-2-Pole State-Variable Filter W-Wavefolding Instructions
- June 5, 2024
- WMD
Table of Contents
C4RBN
4/2-POLE STATE-VARIABLE FILTER W/ WAVE FOLDING
C4RBN 4-2-Pole State-Variable Filter W-Wavefolding
C4RBN builds on WMD’s history with state-variable filters adding interface refinements and improved warm environment stability for live performance and beyond. A novel input saturation circuit and the output wavefolder from WMD’s classic SYNCHRODYNE filter pair together to push the timbral flexibility to the next level. C4RBN is the building block to life in your eurorack.
HP/BP/LP (LEDs & BUTTON): Cycle through the 4 POLE frequency responses. The
LED changes immediately but the audio will wait until the user has made their
selection. Holding the button will delay the audio change until release.| |
FREQ: Manual filter cutoff frequency control. 2.5Hz to 10kHz
---|---|---
FM: Inverting attenuator for scaling the signal at the FM input jack. Input is
exponential and controls filter cutoff.| FOLD/SAT (LEDs & BUTTON): Press this
button to toggle the 4P output wavefolder. The FOLD LED will be lit if it is
enabled. Hold this button to cycle through 4 levels of input saturation. The
current level is indicated by the SAT LED.
SAT: Analog CV input for the input saturator. Offers greater control over the
saturation level.| PING: Sending a gate or trigger into ping generates a fast
decay envelope emulating the response of a vactrol.
RES: Manual and CV control of filter’s resonance. Self oscillates above
3’Oclock.| V/OCT: Calibrated exponential CV input for controlling filter
cutoff in the classic keytracking style.
LP/BP/HP/4 POLE: LP, BP, and HP are the respective outputs of the first 2-Pole
filter. 4P is the output of the 2nd, series, 2-Pole filter with selectable
frequency response and output wavefolder.| IN: Audio input passes through the
input saturator before entering the first 2-Pole filter.
SPECS:
Size: 4hp PCB: 112mm Depth: 38mm (with cables) Power: +92mA, -82mA
Memory: 1 save / minute
Audio Input: 100k ohm impedance 20Vpp range
V/Oct Input: 82k ohm impedance Temperature Compensated CV Inputs: >100k
ohm impedance
Filter Outputs: 1k ohm impedance 20Vpp range
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>