WMD Subway 8 Input 1 Output Scanning Crossfader Owner’s Manual
- June 9, 2024
- WMD
Table of Contents
WMD Subway 8 Input 1 Output Scanning Crossfader
Subway is the intelligent crossfader for multiple signals that we never knew we needed. Eight inputs that can all be crossfaded transparently in analog by a smart digital control interface. The uses for Subway are endless. Dramatically increase the timbral possiblities of your oscillator(s) or turn any module with multiple outputs into a continuously crossfading system. Subway will find plenty of uses in your rack.
FUNCTION
- OUT (Jack & LED): Output of the the crossfader. Bicolor LED for bipolar signals.
- INPUTS: DC coupled inputs for the signals you would like to scan through.
- FADE CURVES: Subway has 3 selectable crossfade curves. Choose a curve by holding one of the following buttons on startup:
1. Linear
2. Exponential
3. Equal Power
- SCAN (Knob & CV Input): Scans through the inputs that are enabled. The potentiometer becomes an attenuator when a CV is applied to the jack.
- ENABLES: Buttons that enable and disable the associated input. When an input is disabled the signal will be removed from the scanning crossfade.
SPECS
- Size: 6hp
- Depth: 38mm (with cables)
- Power: +80mA, -22mA 100k ohm input/CV impedance 1k ohm output impedance 20Vpp range
- Memory: Front panel settings save to EEPROM 1 minute after last button press.
- Digitally controlled analog signal path operates at 48kHz
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>