FOREVER SB-130 Forfit Smart Bracelet User Manual

FOREVER SB-130 Forfit Smart Bracelet User Manual

Key function description：

Multiple Movement Mode, body temperature monitoring, heart rate monitoring, blood pressure monitoring, sleeping monitoring, message notification, raise hand to brighten the screen, Sedentary reminding, drink reminding, APP Data Sync, analyzing and reporting, waterproof IP67.

Basic operation

Long press touch button 5 seconds to turn on the device
Short press touch button: Wake up the screen , switch to different function mode
Long press touch button: Enter menu.

Charging

Be sure to use the bracelet fully charged.
The charger output voltage: + 5 V
Charging time: 1.5~2 hours
Charging method：

Function interfaces

1. Main interface（3 kinds of dials）
   
   Note: On main interface, long press touch button can switch dials.

2. Pedometer(steps counting)\distance\ Calorie
   
   Note: At 12 PM, the step counting data of the bracelet will automatically clear to zero.

3. Health

4. Body Temperature Detecting
   
   Keep taping the touch panel until it shows the “health” icon, long press the touch panel to enter thermometer interface. It suggested the smart band should be wore on the left wrist,1.5cm from the wrist joints. Make sure the smart band is close enough with your skin to detect the temperature.(Use the thermometer function after 10mins of wearing as suggested)

5. Heart Rate Monitoring
   
   Keep press the touch panel until it shows the “health” icon, long press the touch panel to enter,choose the heart rate mode as shown below by taping the touch panel.

6. Blood Pressure Monitoring
   
   In the“health”interface, long press the touch panel to enter,choose the blood pressure mode as shown below by taping the touch panel.Please keep it still until the data show up.

7. **Blood Oxygen Monitoring

** In the“health”interface, long press the touch panel to enter,choose the Blood Oxygen mode as shown below by taping the touch panel.Please keep it still until the data show up.

4. Sleep monitoring

The sleep monitoring time period is from 22:00 to 08:00 the next day. The wristband displays the sleep data, and the sleep data generated that night. The next day can be connected to Bluetooth to synchronize to the APK of the mobile phone in real time
(Note: Synchronization prerequisite: APK To bind the bracelet)

5. Sport
   
   In this menu, you can select different sport modes by clicking the touch keys cyclically.
   Long press the touch area to enter the sports mode and generate related sports data, and cyclically click the touch keys to display such as steps, heart rate, calorie consumption, real-time time, exercise duration, etc.
   Press and hold the touch area again to pause the sport, and short press to exit the sport mode.

6. Message
   Support display 6 pushed messages recently. Such as: caller information, QQ message, WeChat message, WhatsApp message, etc.

7. More–Tools
   

Connect with Bluetooth

1. Open the bracelet

2. Open the Bluetooth

3. Scan the QR code as below， download Youth health APP or Search “Youth health” from App Store（IOS）、application market.
   
   Please check Youth health LOGO：

4. Installation is complete and open Youth health APP，in “Device”“ADD DEVICE”，
   Choose the right name from the list （ex：MTB018T），Click to automatically connect the corresponding bracelet. After the bracelet is successfully connected, the time, date and language (some languages may not be supported) on the bracelet will be automatically synchronized with the mobile phone system.
   

5. Bluetooth Disconnecting

6. Cancel the pairing or turn off Bluetooth via mobile phone system settings.

7. Unbind the bracelet via “More” function in the mobile App.

8. Turn off the mobile APP.

9. Bluetooth Automatic Reconnecting
   If the mobile phone was connected to the bracelet before, when the bracelet reaches the Bluetooth connection range, opening the mobile APP “Youth Health”,Bluetooth will automatically reconnect it.

The APP Introduction-Youth Health

After installing the APP “Youth Health”, please click on the “My” interface to set your user information at first, such as avatar, nickname, gender, height, weight, etc., then the phone and the bracelet will pair via Bluetooth, and the mobile APP will bind to the bracelet (Refer to the Bluetooth pairing steps).

After a successful connection between the bracelet and the mobile APP, the sports data will be automatically synchronized.

1. Step, Sleep, Heart Rate, Blood Pressure, Blood Oxygen and body temperature
   These five modes, data collection can only be completed after the bracelet is connected and can be synchronized to the mobile APP in real time. As the diagram below:
   
   Please note: Step and Sleep are enabled by default at start up.

2. Sports data analysis and report
   
   

3. Equipment
   The following functions can only be realized under the premise that the bracelet is connected to the app successfully.

   • Find device: When you can’t find the bracelet, click “Find Device”. The bracelet will vibrate or light up (with the reminder mode set above) within the Bluetooth range without the normal connection being unbundled.
     There is an icon reminder on the bracelet.

   • Take picture: Click the take a picture function in phone APP, There will be an icon on the bracelet,click the bracelet to take a picture

   • Unit setting: Select measurement unit / temperature unit setting

   • Connect Apple health: Allow notifications, manually enter the Apple Health APP settings page settings

   • Notifications: Including call notification, SMS notification, application message push, such as QQ message push, “WeChat message” push and other functions. For example: the application in the device pushes the notification of incoming call, when the phone receives a call, the bracelet vibrates to remind the screen.

   • Sedentary reminder: Set the start to end time period, sedentary time interval (minutes), threshold (steps), click to enter the repeat setting, select the sedentary reminder date (week), when the sedentary time arrives, the bracelet will vibrate brightly Display icon.

   • Alarm clock reminds:
     Add the alarm time, when the alarm clock time arrived, the smart bracelet will vibrate and the screen bright to remind and display the alarm icon.

   • Drink Reminder:
     Turn on the drink reminder and set the monitoring period, then the bracelet will remind you to drink water at regular intervals within the specified time. The bracelet has an icon of a cup.

   • ○ Raise your hand to brighten the screen:
     Turn on the function of Raise your hand to brighten the screen. Raising the hand to tilt the bracelet inwards and facing the wearer directly in front, the bracelet will shows the bright screen automatically.

   • Remind mode:
     When the mobile phone Youth health APP sets the alarm time to arrive or receives a push message:

   • a. Bright screen: the smart bracelet only have bright screen reminds.

   • b. Vibration: the smart bracelet only vibrates.

   • c. Bright screen+vibration: the smart bracelet bright screen+vibrate reminder

   • Heart rate Monitor:
     Turn on the heart rate monitor and set the detection period, and the bracelet can detect the heart rate every other frequency within the specified time.

   • Do not disturb mode:
     When turning on “do not disturb mode”, in addition to the alarm clock, all push notifications that are set in the settings will not have an automatic bright screen and vibration.

   • Firmware Upgrade:
     When enter into the “firmware update” and check the Youth health APP version, user could check for updates to the new version.

Main Specification:

Processor：BK3431
Display ：LCD TFT 0.96 inch
Battery capacity：90mAh
Waterproof：IP67
Working time：5-7days
OS: Android 5.1 and above & IOS 8.0 and above
Heart Rate: Built-in
Wake up screen automatically： Built-in
Bluetooth： BLE 4.0

Common problem:

1. Do not switch on: when using for the first time, please connect the charger to activate the bracelet; if the bracelet no power, please charge.

2. No Bluetooth connection:

3. Please make sure that the Bluetooth of the mobile phone is turned on and the bracelet is turned on;

4. Please make sure that the bracelet is not bound by other accounts when searching the Bluetooth.

5. Please keep the bracelet and mobile phone as close as possible when searching the Bluetooth.

6. Bluetooth is automatically disconnected, resulting the messages cannot be pushed:
   If the bracelet can not receive messages, please confirm that the smart phone’s app is running in the background and the message notification is turned on (the auxiliary function also needs to be turned on); Pay attention to check if Do Not Disturb mode is turned on when pushing messages.

7. If the sports, sleep, heart rate data is not synchronized to the mobile phone APP after the bracelet is connected to the mobile phone, please try to disconnect Bluetooth and then reconnect.

8. This machine can not replace professional medical equipment, the data is for user reference only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>