KLARSTEIN 10028873 Ice Cream Maker Instruction Manual
- June 5, 2024
- Klarstein
Table of Contents
VANILLA SKY
Ice Cream Maker
10028873 10028874
www.klarstein.com
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual
carefully and take care of the following hints to avoid damage. Any failure
caused by ignoring the items and cautions mentioned in the instruction manual
is not covered by our warranty and any liability. Scan the QR code to get
access to the latest user manual and other information about the product
TECHNICAL DATA
Item number | 10028873, 10028874 |
---|---|
Power supply | 220-240 V ~ 50-60 Hz |
Power consumption | 180 W |
Capacity | 2 L |
Dimensions | 31.5 cm x 27.2 cm x 36.0 cm |
SAFETY INSTRUCTIONS
- Read all the safety and operating instructions carefully and retain them for future reference.
- Ensure the voltage is compliant with the voltage range stated on the rating label, and ensure the earthing of the socket is in good condition.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- Do not upend this product or incline it over a 45° angle.
- To protect against the risk of electric shock, do not pour water on the cord, plug, in and ventilation, or immerse the appliance in water or any other liquid.
- Unplug the appliance after using or before cleaning.
- Keep the appliance 8 cm from other objects to ensure good heat release.
- Do not use the accessories which are not recommended by the Manufacturer.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children should be supervised to ensure that they do not play with the appliance.
- Do not use the appliance close by flames, hot plates, or stoves.
- Do not switch on the power button frequently (ensure 5 min. intervals at least) to avoid damage to the compressor.
- Metal sheets or other electric objects are not allowed to be inserted into the appliance to avoid fire and short circuits.
- When taking out the ice cream, do not knock the barrel or edge of the barrel to protect the barrel from damage.
- Do not switch on the power before install well the barrel or blender blade.
- The initial temperature of the ingredients is 25±5°C. Do not put the ingredients into the freezer for pre-freeze, as it will easily make the blender blade blocked before the ice cream is in good condition.
- Do not remove the blender blade when the appliance is on working.
- Do not use outdoors.
- Never clean with scouring powders or hard implements.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- This appliance is intended to be used in households and similar applications.
Special Notes
-
When positioning the unit, make sure that the power cord is not pinched or damaged.
-
Make sure that there are no multiple sockets or power supplies on the back of the unit.
To avoid contamination of food, please follow the instructions below: -
Regularly clean surfaces that may come into contact with food.
WARNING
When using, servicing, and disposing of the unit, pay attention to the left
symbol on the rear of the unit or on the compressor. This symbol warns of
possible fires. There are flammable substances in the refrigerant lines and in
the compressor. Keep the appliance away from sources of fire during use,
maintenance, and disposal.
PRODUCT DESCRIPTION AND CONTROLS
1 Removable bowl
2 Display
3 Control panel
4 Housing
5 Bottom plate
6 Transparent lid
7 Mixing blade
8 Top lid|
---|---
1 Power
2 Start/Pause
3 Time setting|
USE AND OPERATION
The function of Controls Power
After powering up, the machine enters standby mode. Then press the [POWER]
button to enter the setting mode, prompting you to input the working time.
Start/Pause
After setting the working time, press this button to start the working mode.
During operation, by pressing this button, the mixing will pause and the time
countdown will pause as well.
Time setting
Use the arrow buttons to increase and decrease the working time.
Before first Use
Cleanness: Before use, thoroughly wash all parts that will come into contact
with the ice cream (including the fixed bowl, removable bowl, mixing blade,
transparent lid, refill
lid, measuring cup, and spoon). Warning: Please be sure the power cord is
unplugged.
Important: Always place the Ice Cream Maker upright on a flat surface in order
that the build-in COMPRESSOR can provide the best performance.
1 | 2 | 3 |
---|---|---|
Prepare recipe ingredients from your own recipe or from the recipe booklet
here. Note: You do not need to freeze the bowl for hours in a freezer in ad-
Vance, as this the machine has a BUILTIN COMPRESSOR that freezes the recipe
in- ingredients in operation thus ensuring the output of ice cream| Pour the
well-prepared recipe ingredients and warm water into the removable bowl, then
have a uniform mixing (See below picture).| Place the mixing blade into the
removable bowl and keep the mixing blade bottom hole fitted well with the
motor axis. Then put the transparent lid onto the machine and lock it
anticlockwise (See below picture).
4| 5| 6
Plug-in power, and press the [POWER] button to make the
machine elect- verified.| Press the time setting button to set the working
time.| Touch the [START/PAUSE] button to start working.
7| 8|
| |
You can add your favorite ingredients by opening the refill cover.| After the
operation is over, turn off the machine first, and then pull out the removable
bowl.|
Keep cool function
To avoid melting when the ice cream is not placed well in time, the following
design is supported: After the ice cream is finished and without any other
operation, the machine
will start up the keep-cool function automatically, which can keep cool for
one hour.
One hour later, the machine will enter the standby state.
Motor self-protection function
When the ice cream becomes harder, the mixing motor might be blocked. Then the
motor protection device makes the mixing motor stop working by detecting its
temperature to ensure the life of the motor.
Controlling the Volume of the Ingredients
To avoid overflow and waste, please make sure that the ingredients do not
exceed 60% of the capacity of the removable bowl (Ice cream expands when being
formed).
CLEANING AND CARE
Note: The plug must be removed before cleaning to avoid electric shock.
-
Take out the mixing blade, and wipe it with a dampened cloth.
-
Take out the removable bowl, and clean it with a dampened soft cloth.
-
Wipe the transparent lid and refill the lid with a dampened cloth.
-
Remove the dirt on the body or other places with a dampened cloth, and do not pour water on the cord, plug, and ventilation, and immerse the appliance in water or any
other liquid. -
Allow drying thoroughly with a dry cloth, then return the component to the home position.
TROUBLESHOOTING
Problem | Possible Caus | Solution |
---|---|---|
The ice cream maker does not work. | There is a power failure. A house fuse has | |
blown. | Ensure the maker is plugged in and the power socket is turned on. | |
The ice cream makers can not finish the ice cream. | The maker is placed too | |
close to a heat source. No sufficient ventilation. | Keep the cooler away from |
sunshine or other heat sources.
Place the ice cream maker in good ventilation and keep any items away from the fans.
The lid is opened too frequently or for a long period of time.| Close the lid tightly and do not open the lid too frequently in operation.
DISPOSAL CONSIDERATIONS
**** If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>