EVERSE 8 Rain Resistant Cover Instruction Manual
- August 19, 2024
- EVERSE
Table of Contents
EVERSE Rain cover
EVERSE8‑RAINCVR, EVERSE12‑RAINCVR Quick user guide
Safety
Correct rain cover usage
– Use the speaker in upright (shown left) or kickback (shown right)
orientations only. – Do not use the speaker in monitor mode in damp or wet
conditions.
– Route the cables out of the bottom of the amp pocket. Make sure that the zippers are tight around the cables.
– Do not route the cables out of the sides of the amp pocket. Do not leave the amp pocket unzipped.
– Do not submerge the speaker in water or spray with a water hose.
Cleaning and drying instructions
– Clean with a damp cloth.
– Air-dry only.
– Do not machine wash.
– Do not tumble dry.
Drain holes
The EVERSE rain cover was designed with four drain holes. The goal is to drain
any water that may penetrate the inside of the rain cover.
IP rating
The EVERSE loudspeaker with the rain cover installed is rated for IP44, but
only in upright and kickback orientations, and only when used properly as
defined in the included Quick user guide.
Some water may pool at the bottom of the rain cover when exposed for an
extended period of time. Remove the speaker from the bag to allow both to dry
properly.
When using the rain cover, the weatherized input cover is optional to achieve
the IP44 rating.
Weatherization
When the rain cover is installed, the EVERSE loudspeaker is designed to be
weather resistant to IP44 standards, but not waterproof. The weather
resistance may be reduced by damage, repair, improper disassembly, and regular
wear and tear. Always inspect the EVERSE loudspeaker and accessories before
and after every use. Allow the loudspeaker and components to dry before
storage or between uses.
The EVERSE loudspeaker with rain cover installed is intended only for
temporary use in wet or damp environments. The loudspeaker is not intended to
be exposed continuously to moisture over long periods of time. Do not expose
to salt water or spray, do not expose to chlorine or use in high chlorine
environments.
Using the rain cover
To use the rain cover:
-
Unzip the rain cover and insert the speaker. Make sure the grill is facing the front flap.
-
Zip the rain cover.
-
Unzip the handle pocket and use the pocket to grab the handle.
The pocket goes under the handle. -
Lift the front flap and fold it back over the top of the speaker.
-
Attach the flap using the hook and loop at the back of the top of the speaker
To use the speaker in tripod position:
- Open the bottom flap of the rain cover.
- Insert the speaker on a tripod.
To connect the speaker:
- Unzip the amp pocket in the back of the rain cover.
- Make the required connections.
- Zip the amp pocket.
Technical data
| EVERSE8-RAINCVR Rain resistant cover for EVERSE 8
---|---
Color| Black
Material| 600D poly with waterproof and hydrophobic treated Lycra cloth
IP rating| IP44
Dimensions (H x W x D) (mm)| 400 mm x 285 mm x 280 mm
Dimensions (H x W x D) (in)| 15.75 in x 11.22 in x 11.02 in
Shipping dimensions (H x W x D) (mm)| 480 mm x 425 mm x 28.5 mm
Shipping dimensions (H x W x D) (in)| 18.9 in x 16.7 in x 1.12 in
Weight (g)| 370 g
Weight (lb)| 0.82 lb
Shipping weight (g)| 420 g
Shipping weight (lb)| 0.93 lb
| EVERSE12-RAINCVR Rain resistant cover for EVERSE 12
Color| Black
Material| 600D poly with waterproof and hydrophobic treated Lycra cloth
IP rating| IP44
Dimensions (H x W x D) (mm)| 584 mm x 362 mm x 378 mm
Dimensions (H x W x D) (in)| 23 in x 14.25 in x 14.88 in
Shipping dimensions (H x W x D) (mm)| 23 mm x 570 mm x 590 mm
Shipping dimensions (H x W x D) (in)| 0.90 in x 22.4 in x 23.23 in
Weight (g)| 620 g
Weight (lb)| 1.37 lb
Shipping weight (g)| 680 g
Shipping weight (lb)| 1.50 lb
Bosch Security Systems, LLC
130 Perinton Parkway
Fairport, NY 14450 USA
www.electrovoice.com
© Bosch Security Systems, LLC, 2023
EU importer:
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Platz 1
70839 Gerlingen Germany
© Bosch Sicherheitssysteme GmbH, 2023
2023-11 | 02 | F.01U.415.385 | 202311031428