VISSLES MS1 2-In–1 Mount Stand User Manual

: June 5, 2024
: VISSLES

Table of Contents

In the box
Usage Instructions
Parameters:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MS1 2-In–1 Mount Stand
User Manual

https://vissles.com/

Please read this manual carefully before use.

In the box

Extendable clip
A. Both ends can be folded inward.
B. The inner side of the clip is 13.5-26CM, it is designed for mobile phones or tablets with a screen size of 5-15.5 inches.
Tablet Stand
A. Aluminum alloy base: The maximum opening angle is 90°.
B. Hinge structure: After removing the spindle cap, the hexagonal screw can be reinforced with a Hex key; it supports a rotation angle of 200°.
C. Hinge structure: After removing the spindle cap, the hexagonal screw can be reinforced with a Hex key; it supports a rotation angle of 360°.
D. Universal joint: The tilt angle of the clip is 50°, and the parallel rotation angle of the clip is 250°.
Tablet Mount Base
A. Screw hole.
B. The base features a 3M adhesive pad.
Allen Wrench and screws
The inner hex key is used to reinforce the hinge structure. Screws can be used to fix the tablet mount base.

Usage Instructions

Connect tablet stand and extendable clip.
• Place the fixing ring on the universal head.
• Align the universal head with the threaded structure on the back of the clip, and press firmly until the universal head enters the threaded structure.
• Tighten the fixing ring.
Tablet mount base usage instructions.
• Clean the surface where the bracket will be fixed, should be a flat surface such as the wall or the surface of the Cabinet.
• Tear off the protective film on the 3M adhesive pad and stick the tablet mount base on a flat surface.
• Use the screws provided to pass through the screw holes to fix the tablet mount base on the flat surface.
• Make sure the base is fixed firmly to prevent your device to fall from the base.

3. Fasten the hinge

****• Remove the silicone cap on the hinge.
• Use the inner Hex key to tighten the hexagonal screws at the hinge.

4) Put your device in the extendable clip.

• The clip can be extended with a length ranging from 13.5cm to 26cm. Please use a device within this size.
• If the size of your device exceeds this range, please pull inward the clip on one side and place the stand vertical to the desktop, then place your device in the center.

Note:

To provide the most ideal and comfortable viewing angle, the product features multi-angle plus three-dimensional space adaptability, users can make appropriate adjustments according to their own needs.
If you have a big device, please slowly adjust the angle and height as needed to prevent your device from falling due to the center of gravity deviation.

Parameters:

Brand: Product Name:
Model: Material: Color: Weight:
Load-bearing: Dimension: Compatibility:

Vissles Vissles 2-in-1 Mount Stand Vissles-MS1 Aluminum alloy, ABS, Silica gel Black 0.426KG (Tablet Stand) + 0.076KG (Tablet Mount Base) + 0.013KG (Allen Wrench and Screws) Up to 2KG 241’1803’52mm (Folded)/270321180mm (Extended) It is recommended for 5-15.5 inch mobile phones or tablets.

Brand:
Product Name:
Model:
Material:
Color:
Weight:
Load-bearing:
Dimension:
Compatibility:| Vessels
Vessels 2-in-1 Mount Stand
Vessels-MS1
Aluminum alloy, ABS, Silica gel
Black
0.426KG (Tablet Stand) + 0.076KG (Tablet Mount Base) + 0.013KG (Allen Wrench and Screws)
Up to 2KG
2418052mm (Folded)/270321180mm (Extended)
It is recommended for 5-15.5 inch mobile phones or tablets.
---|---