behringer P0196 1C Ultra-Compact 100-Watt 5 Inch Monitor Speakers User Manual
- June 5, 2024
- Behringer
Table of Contents
User Manual
MONITOR SPEAKERS 1C
Ultra-Compact, 100-Watt, 5″ Monitor Speakers
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
Terminals marked with this symbol carry an electrical current of sufficient
magnitude to constitute a risk of electric shock.
Use only high-quality professional speaker cables with ¼” TS or twist-locking
plugs pre-installed. All other installations or modifications should be
performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated
dangerous voltage inside the enclosure – voltage that may be sufficient to
constitute a risk of shock.
****This symbol, wherever it appears, alerts you to important operating and
maintenance instructions in the accompanying literature. Please read the
manual.
Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear
section).No user-serviceable parts inside. Refer servicing to qualified
personnel.
Caution
To reduce the risk of fire or electric shock do not expose this appliance to
rain and moisture. The apparatus shall not be exposed to dripping or splashing
liquids and no objects filled with liquids, such as vases, shall be placed on
the apparatus.
Caution
These service instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than
that contained in the operation instructions. Repairs have to be performed by
qualified
service personnel.
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with a dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet. -
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Use only attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. -
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
-
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
-
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive 2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources.
For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service. -
Do not install in a confined space, such as a bookcase or similar unit.
-
Do not place naked flame sources, such as lighted candles, on the apparatus.
-
Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.
-
This apparatus may be used in tropical and moderate climates up to 45°C.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly on or in part upon any description,
photograph, or statement contained herein. Technical specifications,
appearances, and other information are subject to change without notice. All
trademarks are the property of their respective owners. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer,
Bugera, Aston Microphones, and Coolaudio are trademarks or registered
trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd.
2021 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s
Limited Warranty, please see complete details online at
community.musictribe.com/pages/support#warranty.
Specifications
| Connector type | Clip terminal |
|---|---|
| Wire diameter | < 4 mm |
| Power capacity | 25 W RMS, 100W Peak |
| Impedance | 44 |
| Frequency range | 60 Hz to 23 kHz (-10 dB) |
| Nominal sound pressure level (SPL) | 86 dB*W/m (program, bandwidth 100-5000 Hz |
on-axis, full space)
Max. the short term acoustic output| 112 dB @ 1m (on-axis, half space)
Tweeter| ½”
Woofer| 5½”
Crossover frequency| 5000 Hz
Behringer is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from time
to time to existing products without prior notice.
Specifications and appearance may differ from those listed or illustrated.
Wiring
- The MONITOR 1C is capable of producing extreme volumes. Please note that high sound pressures may cause temporary or even permanent hearing damage. Be careful to select a suitable volume.
Always mute your amp before connecting the speakers. Use loudspeaker cables
with a diameter of up to 4 mm (AWG 6).
Connect your MONITOR 1C to the amplifier as shown in the illustration:
Press the connector clamps on the back of the speaker and insert the bare end
of the loudspeaker cable, paying attention to the correct polarity. Let go of
the connector to secure the cable. Connect the second loudspeaker the same
way.
- Make sure that bare wire ends never touch the open end of another speaker cable, speaker connectors, or metal parts of your amp.
- If you let your Monitor 1C loudspeakers run at or near their power limit, the integrated protective circuitry may temporarily disconnect the tweeters. Lower the volume to allow the tweeter to automatically come online again. In this case, there is no danger of causing permanent damage. If you turn up treble on your amplifier, the protective circuitry may intervene.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Be sure to mount your speakers on a solid, stable, and level base or stand. Vibrating floors do not provide reliable support for speaker enclosures or stacks.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/device combination to avoid injury from stumbling.
- Refer all services to qualified service personnel. Service is required when the unit has been damaged in any way, liquid has been spilled or objects have fallen into the apparatus, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Hereby, Music Tribe declares that this product is in compliance with Directive
2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation
519/2012 REACH SVHC and Directive 1907/2006/EC, and this passive product is
not applicable to EMC Directive 2014/30/EU, LV Directive 2014/35/EU.
The full text of the EU DoC is available at
https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>