behringer MICROMIX MX400 Ultra Low Noise 4-Channel Line Mixer User Manual

: June 1, 2024
: Behringer

Table of Contents

behringer MICROMIX MX400 Ultra Low Noise 4-Channel Line Mixer
Product Information
Product Usage Instructions
FAQ
Important Safety Instructions
LIMITED WARRANTY
MICROMIX MX400
Connectors and Control Elements
Applications
Specifications
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

behringer MICROMIX MX400 Ultra Low Noise 4-Channel Line Mixer

Product Information

Specifications

Model: MICROMIX MX400
Type: 4-Channel Line Mixer
Version: 4.0
Features: Ultra Low-Noise

Product Usage Instructions

Safety Instructions

Be cautious of dangerous voltage inside the enclosure.
Follow operating and maintenance instructions in the manual.
Do not remove the cover; refer servicing to qualified personnel.
Avoid exposing the appliance to rain or moisture.
Use near water, clean with a dry cloth, and maintain ventilation.
Do not block ventilation openings or place them near heat sources.
Connect to a MAINS socket outlet with protective earthing.
Do not install in confined spaces or near naked flames.
Dispose of batteries at a battery collection point.

Usage Guidelines

Read, keep, and follow all instructions and warnings.
Do not use in water or expose to liquids.
Ensure proper ventilation and placement away from heat sources.
Contact qualified service personnel for repairs or servicing.

FAQ

Q: Where can I find warranty information?
A: For warranty terms and conditions, visit community.musictribe.com/support.
Q: Can I use the MICROMIX MX400 near water?
A: It is advised not to use the appliance near water to avoid electric shock risks.

Important Safety Instructions

CAUTION
RISK OF ELECTRIC SHOCK! DO NOT OPEN!

Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist locking plugs pre-installed. All other installations or modifications should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user-serviceable parts inside. Refer servicing to qualified personnel.

Caution
To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install by the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Use only attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/ EU) and your national law. This product should be taken to a collection centre licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
Do not install in a confined space, such as a bookcase or similar unit.
Do not place naked flame sources, such as lighted candles, on the apparatus.
Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.
This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss that may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners.
Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd.
© Music Tribe Global Brands Ltd.
2024 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/support.

MICROMIX MX400

Welcome to Behringer

Thank you for showing your confidence in us by purchasing the Behringer MicroMIX MX400.
This 4-channel mixer is perfect for anyone wanting to mix 4-line level signals quickly and without complications. Despite its compact size, this mixer produces the highest signal quality even at the highest levels, in the highest signal integrity.

Connectors and Control Elements

behringer-MICROMIX-MX400-Ultra-Low-Noise-4-Channel-Line-Mixer-
FIG-5

Connect the power supply unit to your MX400 using the 12 V connector. Connecting the power supply unit to the mains automatically switches the MX400 on. To disconnect the unit from the mains, pull out the main cord plug.
When installing the product, ensure that the plug is easily accessible. If mounting in a rack, ensure that the mains can be easily disconnected by a plug or by an all-pole disconnect switch on or near the rack.
Up to four line signal sources can be connected to these 1/4″ TS connectors (INPUT).
In case the volume level of one of the signal sources is set too high, the input of the corresponding channel may produce distortion!
The OUTPUT carries the MIX signal and is on a 1/4″ TS connector.
This ON LED is illuminated as soon as the unit is connected to the power
Using the LEVEL controls you can set the output level of each channel.
High volume levels can damage your hearing or your headphones. Please turn down all volume controls to zero (to the left) before you power up the amp. Always make sure you use appropriate volume levels.

SERIAL NUMBER. The serial number of the MX400 is located at the bottom.

Applications

The following figure shows an example of how to use the MicroMIX MX400.

behringer-MICROMIX-MX400-Ultra-Low-Noise-4-Channel-Line-Mixer-
FIG-6

Specifications

Line Inputs

Type: 1/4″ TS connector
Impedance: min. 4.7 kΩ
Max. input level: +16 dBu

Output

Type: 1/4″ TS connector
Impedance: approx. 80 Ω
Max. output level: +16 dBu

Power Supply

Power Supply: external power supply, 12 V?/ 150 mA

Power Range

USA/Canada: 120 V~, 60 Hz
China: 220 V~, 50 Hz
U.K./Australia: 240 V~, 50 Hz
Europe: 230 V~, 50 Hz
Japan: 100 V~, 50 / 60 Hz

Dimensions/Weight

Dimensions (H x D x W): approx. 1 5/6 x 2 1/4 x 4 1/16″ approx. 46.5 x 57.2 x 103.6 mm
Weight: approx. 0.81 lbs / .37 kg

Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

Hereby, Music Tribe declares that this product complies with Directive 2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.