behringer TO800 Vintage Tube Sound Overdrive Effects Pedal User Manual

: May 15, 2024
: Behringer

Table of Contents

TO800 Vintage Tube Sound Overdrive Effects Pedal
Controls
Safety Instructions
Limited Warranty
Specifications
Documents / Resources

User Manual
VINTAGE TUBE OVERDRIVE TO800
Vintage Tube-Sound Overdrive Effects Pedal

TO800 Vintage Tube Sound Overdrive Effects Pedal

Safety Instruction

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Use only attachments/ accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
**** Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
Do not install in a confined space, such as a book case or similar unit.
Do not place naked flame sources, such as lighted candles, on the apparatus.

WARNING

As with all small batteries, the batteries used with this product should be kept away from small children who still put things in
their mouths. If they are swallowed, promptly call your local poison control center
Always remove battery if consumed or if product is to be left unused for a long time
Clean the battery contacts and also those of the device prior to battery installation
Replacement of a battery with an incorrect type that can defeat a safeguard! Replace only with the same or equivalent type
Replace all batteries of a set at the same time, ensure the batteries are installed correctly with the regard to polarity (+ and -)
disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas
Attention should be drawn to the environmental aspects of battery disposal

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Thank you for showing your confidence in us by purchasing the Behringer VINTAGE TUBE OVERDRIVE TO800. This high-quality effects pedal is ideally suited for giving electric guitars maximum flexibility with classic overdrive sounds that capture every nuance of your playing—from smooth overdrive to screaming tube sounds. Thanks to its high-performance features you get tube- like vintage-style distortion, smooth sustain and super fat tone.

Controls

The DRIVE control adjusts the intensity of the overdrive effect.
The LEVEL control adjusts the output level.
The TONE control allows you to shape your overall sound.
The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4″ TS IN connector to plug in the instrument cable.
The 1/4″ TS OUT connector sends the signal to your amp.

Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.

The TO800 has no on/off switch. As soon as you insert the jack into the in connector, the TO800 begins running.
When not using the TO800, remove the jack from the in connector. This extends the life of the battery.

The SERIAL NUMBER is located at the bottom.

Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.

Limited Warranty

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/pages/support#warranty.

Specifications

In

Connector	1/4″ TS
Impedance	500 kΩ

In

Connector	1/4″ TS
Impedance	1 kΩ

Power Supply

| 9 V ****, 100 mA DC, regulated
---|---
PSU-SB-CN Behringer| 220 VAC adaptor China
PSU-SB-EU Behringer| 230 VAC adaptor Europe
PSU-SB-JP Behringer| 100 VAC adaptor Japan
PSU-SB-SAA Behringer| 240 VAC adaptor Australia
PSU-SB-UK 2 Behringer| 40 VAC adaptor UK
PSU-SB-UL Behringer| 115 VAC adaptor USA
Power connector| 2 mm DC jack, negative center
Battery| 9 V type 6LR61
Power consumption| 30 mA

Physical/Weight

Dimensions (H x W x D)| approx. 2 1/8 x 2 3/4 x 4 4/5″
approx. 54 x 70 x 123 mm
---|---
Weight| approx. 0.73 lbs / 0.33 kg

Behringer is constantly striving to maintain the highest professional standards. As a result of these ef forts, modfications may be made from time to time to existing products without prior notice. Specfications and appearance may therefore dif fer from those listed or shown.

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2023 All rights reserved.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Behringer
VINTAGE TUBE OVERDRIVE TO800

Responsible Party Name:| Music Tribe
Commercial NV Inc.
---|---
Address:| 122 E. 42nd St.1,
8th Floor NY,
NY 10168,
United States
Email Address:| legal@musictribe.com

VINTAGE TUBE OVERDRIVE TO800
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU,
Directive 2011/65/EU and Amendment 2015/863/EU,
Direc tive 2012/19/EU, Regulation 519/2012
REACH SVHC and Directive 1907/2006/EC.

Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 8th Floor, 20 Farringdon Street
London EC4A 4AB, United Kingdom

We Hear You

Documents / Resources

| behringer TO800 Vintage Tube Sound Overdrive Effects Pedal [pdf] User Manual
TO800 Vintage Tube Sound Overdrive Effects Pedal, TO800, Vintage Tube Sound Overdrive Effects Pedal, Tube Sound Overdrive Effects Pedal, Sound Overdrive Effects Pedal, Overdrive Effects Pedal, Effects Pedal, Pedal
---|---