behringer Noise Reducer NR300 Ultimate Noise Reduction Effects Pedal User Guide
- June 5, 2024
- Behringer
Table of Contents
behringer Noise Reducer NR300 Ultimate Noise Reduction Effects Pedal User
Guide
Thank you for showing your confidence in us by purchasing the Behringer NOISE REDUCER NR300. This ultimate effects pedal is specifically designed to eliminate unwanted noise and hum without altering your tone. Thanks to its high-performance features it preserves the original attack and envelope while leaving your playing and dynamics intact.
Controls
-
This MODE switch allows you to chose between MUTE and REDUCTION mode. Pressing the pedal in MUTE mode results in muting the whole input signal, to reduce noises in during pauses for example. In REDUCTION mode, quiet passages (when noise or hum would get obvious to the listener) are effectively reduced. Adjustments to threshold and decay settings are necessary in this case (see below).
-
Use the THRESH(old) control to define a level threshold in REDUCTION mode. When the input signal falls below this value, the unit starts reducing the signal.
-
The DECAY control determines how fast the signal reduction is released when the input signal exceeds the threshold value again.
-
The MUTE/BATT LED illuminates when the effect is activated.
It also serves as a battery level indicator. -
The REDUCTION LED illuminates when the input level falls below the threshold and starts getting reduced.
-
Use the footswitch to activate/deactivate the effect.
-
Use this 1/4″ TS IN connector to plug in the instrument cable.
-
The 1/4″ TS OUT connector sends the signal to your amp.
-
Use this 1/4″ TS SEND connector to connect it to the input of an external effect unit. This way you can feed in an effect signal while simultaneously eliminating noises from the unit.
-
The 1/4″ TS RETURN connector is used to feed in the external effect signal.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery (not included), press the hinges with a
ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.
The NR300 has no on/off switch. As soon as you insert the jack into the in
connector, the NR300 begins running.
When not using the NR300, remove the jack from the in connector. This extends
the life of the battery.
The SERIAL NUMBER is located at the bottom.
Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
Limited Warranty
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/pages/support#warranty.
Specifications
In
Connector ¼” TS
Impedance 500 kΩ
Out
Connector ¼” TS
Impedance 1 kΩ
Send
Connector ¼” TS
Impedance 1 kΩ
Return
Connector ¼” TS
Impedance 50 kΩ
Power Supply
9 V , 100 mA DC regulated
Behringer PSU-SB
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 – 60 Hz
Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2 1/8 x 2 3/4 x 4 4/5″
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs/0.33 kg
Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and other
information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston
Microphones, and Coolaudio are trademarks or registered trademarks of Music
Tribe Global Brands Ltd.
© Music Tribe Global Brands Ltd. 2021 All rights reserved.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Behringer
NOISE REDUCER NR300
Responsible Party Name: Music Tribe Commercial NV Inc. Address: 122
E. 42nd St.1, 8th Floor NY, NY 10168, United States
Email Address: legal@musictribe.com
NOISE REDUCER NR300
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/ EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>