behringer TUBE AMP MODELER TM300 Ultimate Tube Amp Modeling Effects Pedal User Guide

TUBE AMP MODELER TM300
Ultimate Tube Amp Modeling Effects Pedal

Thank you for showing your confidence in us by purchasing the Behringer TUBE AMP MODELER TM300. This high-quality effects pedal provides 3 classic guitar amps, 3 gain modes, and 3 mic placements for a total of 27 configurations that let you easily achieve the most sought-after tube amp sounds from clean, crunch to super-fat distortion.  Thanks to its high-performance features you can achieve the typical hard rock or heavy metal distortion sounds.

Controls

1. The LEVEL control adjusts the output level.

2. The LOW control allows you to boost/cut the low-frequency range.

3. The HIGH control allows you to boost/cut the high-frequency range.

4. The DRIVE control adjusts the amount of overdrive effect.

5. The MIC switch simulates the microphone placement (orientation and distance) in relation to the cabinet. Select CLSIC (Classic: distant mic placement without ambiance) to achieve high midrange content and a greater definition of notes like with classic early tube amps. In CNTR (Center: close miking at the center of a cone) you get greater high mid-range content and increased low-end for mega crunchy results. OFF X (Off-Axis: close miking at the edge of a cone) is very similar to CNTR, but produces a smoother, softer sound with less upper mid-range content; perfect in combination with MODE position HOT.

6. Use the MODE switch to dial up one of 3 gain settings (HOT, HI G, CLN) that you want to combine with the amp setting.

7. Use the AMP switch to select one of 3 great classic tube amps.
   You will recognize these classic amp tones as soon as you hear them. For crystal-clear, transparent sounds with dynamic bass select TWEED. For aggressive mids and incredible sustain select BRIT(ISH). Rounder and more evened-out (yet still sophisticated) sounds can be dialed up if you select CALIF(ORNIAN); it’s perfect for leads.

8. The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.

9. Use the footswitch to activate/deactivate the effect.

10. Use this ¼” TS IN connector to plug in the instrument cable.

11. The ¼” TS OUT connector sends the signal to your amp.

Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.

• The TM300 has no on/off switch. As soon as you insert the plug into the connector, the TM300 is on. When not in use, remove the plug from the connector. This extends the life of the battery.

The SERIAL NUMBER is located on the bottom.

Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service the product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when the power supply cord or plug is damaged.

Limited Warranty

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at  ommunity.musictribe.com/pages/support#warranty.

Specifications

In|
---|---
Connector| ¼” TS
Impedance| 500 kΩ
Out|
Connector| ¼” TS
Impedance| 1 kΩ
Power Supply
9 V , 100 mA DC regulated

Behringer PSU-SB

Physical/Weight

Dimensions
(H x W x D)| approx. 2 1/8 x 2 3/4 x 4 4/5″
approx. 54 x 70 x 123 mm
---|---
Weight| approx. 0.73 lbs / 0.33 kg

Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas,  Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd.
© Music Tribe Global Brands Ltd. 2021 All rights reserved.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Brand Name
TUBE AMP MODELER TM300

TUBE AMP MODELER TM300
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive 2011/65/EU, Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
The full text of the EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202
København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom

References

• Music Tribe
• Music Tribe
• Music Tribe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>