tc electronic Infinite Sample Sustainer User Guide
- June 5, 2024
- tc electronic
Table of Contents
Quick Start Guide
INFINITE SAMPLE SUSTAINER
Visit musictribe.com to download the full manual
Controls
-
USB – Connects to your computer or mobile device for use with the TonePrint App and for firmware updates.
-
VERB LED – This LED illuminates when the reverb is active.
-
DECAY – controls the fade-out rate of the sustain effect layer.
-
FADE IN – Controls the fade-in rate of the sustain effect layer.
-
Output
-
SEND – The FX loop sends a sustained signal to external effects.
-
Footswitch – Activates/deactivates the sustain layer. The functionality varies, depending on the LATCH/MOMEN switch setting:
• MOMEN – Press and hold to activate sustain layer. Release to deactivate sustain layer.
• LATCH – Press and release to activate sustain layer. Double-tap to clear memory. -
Power Input – Connect a standard 9 V / >100 mA power supply. Power adapter not included.
-
LEVEL – Controls the output volume of the effect.
-
DRY/VERB – Activates the built-in reverb engine.
-
FX Type – Select the number of sustain layers or TonePrint slot.
-
Main LED – Illuminates when the sustain effect is active (red = Latching; green = Momentary).
-
Input
-
RETURN – The FX Loop returns sustained signal from external effects.
-
LATCH/MOMEN – Selects between latching or momentary footswitch control.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
TC Electronic
INFINITE SAMPLE SUSTAINER
Responsible Party Name: Music Tribe Commercial NV Inc
Address: 122 E. 42nd St.1,
8th Floor NY, NY 10168, United States
Email Address: [email protected]
INFINITE SAMPLE SUSTAINER
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment. Hereby, Music Tribe
declares that this product is in compliance with Directive 2014/30/EU,
Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU,
Regulation 519/2012 REACH
SVHC and Directive 1907/2006/EC. The full text of the EU DoC is available at
https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom