behringer Bass Overdrive BOD400 Authentic Tube-Sound Overdrive Effects Pedal User Guide
- June 5, 2024
- Behringer
Table of Contents
BASS OVERDRIVE BOD400
Authentic Tube-Sound Overdrive Effects Pedal
Thank you for showing your confidence in us by purchasing the Behringer BASS OVERDRIVE BOD400. This high-quality effects pedal is specifically designed for bass applications. Thanks to its high-performance features you will achieve tube-like distortion, smooth sustain, and super-fat tone with maximum punch.
Controls
- The LEVEL control adjusts the output level.
- The HIGH control allows you to boost/cut the high-frequency range.
- The LOW control allows you to boost/cut the low-frequency range.
- Use the GAIN control to adjust the amount of overdrive.
- With the BAL(ance) control you can adjust the amount of the dry direct signal and the effect signal.
- The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
- Use the footswitch to activate/deactivate the effect.
- Use this ¼” TS IN connector to plug in the instrument cable.
- The ¼” TS OUT connector sends the signal to your amp.
Use the DC IN connection at the front of the unit to plug in a 9 V power
supply (not included).
The BATTERY COMPARTMENT is located at the bottom. Open the lid to install
or replace the 9 V battery.
The BOD400 has no on/off switch. As soon as you insert the jack into the connector, the BOD400 begins running. When not using the BOD400, remove the jack from the connector. This extends the life of the battery.
The SERIAL NUMBER is located on the bottom.
Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service the product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when the power supply cord or plug is damaged.
Warranty
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at usictribe.com/warranty.
Specifications
In
Connector
Impedance| ¼” TS
50 kΩ
---|---
Out
Connector
Impedance| ¼” TS
1 kΩ
---|---
Power Supply
9 V, 100 mA regulated
Behringer PSU-SB
| USA/Canada | USA/Canada |
|---|---|
| China/Korea | 220 V~, 50 Hz |
| U.K./Australia | 240 V~, 50 Hz |
| Europe | 230 V~, 50 Hz |
| Japan | 100 V~, 50 – 60 Hz |
| Power connector | 2 mm DC jack, negative center |
| Battery | 9 V type 6LR61 |
| Power consumption | 30 mA |
Physical/Weight
| Dimensions | approx. 54 x 70 x 123 mm |
|---|---|
| (H x W x D) | (2.1 x 2.8 x 4.8″) |
| Weight | approx. 0.33 kg (0.7 lbs) |
Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global rands Ltd. 2021 All rights reserved.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
| Responsible Party Name: | Music Tribe Commercial NV Inc.5270 Procyon Street, |
|---|---|
| Address: | 5270 Procyon Street, Las Vegas NV 89118, United States |
| Phone Number: | +1 702 800 8290 |
BASS OVERDRIVE BOD400
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there s no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by MUSIC Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with
Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU,
Directive 2012/19/EU, Regulation 519/2012 REACH SVHC, and Directive
1907/2006/EC. The full text of the EU DoC is available at
https://community.musictribe.com
EU Representative : Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>