SimRush SFP-LANPort Power Indoor Control Unit User Guide
- June 5, 2024
- SimRush
Table of Contents
SimRush SFP-LANPort Power Indoor Control Unit
Cable Guide
SimRush Power
The SimRush Power is an indoor controller/ router for your network. This model
can support up to 3 Outdoor units
(Note that this model does not have built-in WiFi, additional hardware is
required).
It is pre-configured out of the box and managed through the SimRush web portal
CPanel. To get online, simply plug in your SimRush Outdoor unit (ODU) as
instructed below.
Quickstart
Make sure you follow the following steps to get online.
-
Connect the ethernet cable to Ethernet Port 5 for ODU1, Ethernet Port 4 for ODU2 and Ethernet Port 3 for ODU3 (far
right ports- Highlighted in GREEN) -
Connect the Controller to the power adaptor supplied (24v 2.5a DC)
-
Connect your PC to the LAN (Highlighted in ORANGE)
- Ethernet port 2 and SFP
- This model does not have a Wireless card, additional SimRush wireless hardware will automatically connect to the controller and broadcast – Default wireless is “SimRush-xxxxxx’ and the Serial number as the password, eg AABBCC112233 – Serial number is located on the box or back of the controller, all characters before the “/123”
-
To make changes to the LAN address or Wireless settings, please visit SPanel: https://portal.simrush.com/
-
(OPTIONAL) Connect your alternative broadband to utilize the built-in Load-Balancing feature, connect Ethernet
Port1 (Highlighted in RED) to your alternative broadband network. Please ensure your alternative broadband router
is providing the following network via DHCP Gateway: 192.168.1.1, Subnet 255.255.255.0
Outdoor Unit (ODU)
Please see ODU Guide
Registered Address: Quartermaster House, Dewing Road, Rackheath, Norfolk, NR13
6PS, UK
Company Reg: 10237486 | VAT Reg: 273687952
T:0330 0563 110
E: hello@simrush.com
W: www.simrush.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>