FESTINA IFMFS00-01 Men Watch Instruction Manual

FESTINA IFMFS00-01 Men Watch

INSTRUCTION

DISPLAYS AND BUTTONS

SETTING THE TIME

1. Pull the crown out to the 2nd click position so that the second-hand stops at zero position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, a small second hand begins to run.

SETTING THE DATE

1. Pull the crown out to the 1st click position.
2. Turn the crown clockwise to set the date.
   • If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day
3. After the date has been set, push the crown back to the Normal position.

USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second united up to a maximum of 59 minutes 59 seconds. The chronograph second hand keeps continuously for 59 minutes and 59 seconds after starting.

Measuring time with the chronograph

1. The chronograph can be started and stopped each time button “A” is pressed.
2. Pressing button “B” resets the chronograph and the chronograph second hand, chronograph minute hand, and chronograph hour hand return to zero position

CHRONOGRAPH RESET( INCL. AFTER REPLACING BATTERY)

This procedure should be performed when the chronograph second-hand does not return to zero position after the chronograph has been reset, including after the battery has been replaced.

1. Pull the crown out to the 2nd position.
2. Press button “A” to set the chronograph second hand to zero position. The chronograph hand can be advanced rapidly by continuously pressing the button “A”.
3. Once the hand has been reset to zero position, push the crown back to the normal position.

Do not push the crown to normal position while the chronograph second-hand returns to zero position. It stops on the way when the crown is returned to normal position and its position is recognized as zero position.

By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch- making products must be selectively collected for processing. You may therefore dispose of your quartz watch-making products at any of our retail outlets or any other authorized collection point. The selective collection, processing, rating, and recycling of these products help contribute to safeguarding the environment and protecting our health.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>