Behringer 50USB 150-Watt Bi-Amped Reference Studio Monitors User Guide
- June 5, 2024
- Behringer
Table of Contents
- Behringer 50USB 150-Watt Bi-Amped Reference Studio Monitors
- Important Safety Instructions
- LEGAL DISCLAIMER
- LIMITED WARRANTY
- Hook-up
- Controls
- Getting started
- Specifications
- Other important information
- FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Behringer 50USB 150-Watt Bi-Amped Reference Studio Monitors
Important Safety Instructions
Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installations or modifications should be performed only by qualified personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear
section). No user-serviceable parts inside. Refer servicing to qualified
personnel. To reduce the risk of fire or electric shock, do not expose this
appliance to rain and moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects filled with liquids, such as vases, shall
be placed on the apparatus. These service instructions are for use by
qualified service personnel only. To reduce the risk of electric shock do not
perform any servicing other than that contained in the operation instructions.
Repairs have to be performed by qualified service personnel.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Use only attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
- Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
- Do not install in a confined space, such as a book case or similar unit.
- Do not place naked flame sources, such as lighted candles, on the apparatus.
- Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
- This apparatus may be used in tropical and moderate climates up to 45°C.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.
Hook-up
Controls
- INPUT – Plug a ¼” TRS connector into each of these inputs to connect the audio source. The STUDIO 50USB has ¼” TRS and XLR balanced inputs. The MEDIA 40USB ¼” TRS inputs are unbalanced.
- RCA INPUT (MEDIA 40USB) – Plug an RCA connector into each of these inputs to connect the audio source.
- USB CONNECTOR – Connect a USB B type connector from a computer to play the computer audio in the monitors.
- POWER SWITCH – Turns the monitor on and off.
- POWER SOURCE – Connect the included power cable to this socket and to a mains outlet properly configured for your model.
- SPEAKER OUTPUT – Connect the included speaker cable to the SPEAKER INPUT connector on the left monitor. Four amplifiers inside the right monitor separately power the HF and LF drivers in both monitors.
- AUX INPUT (MEDIA 40USB) – Accepts a 1/8″ stereo connector, and allows convenient front panel connections to an external audio source such as an MP3 player.
- HEADPHONE OUTPUT (MEDIA 40USB) – Accepts a 1/8″ stereo connector from headphones. The internal amplifiers are muted when headphones are connected.
- VOLUME KNOB (MEDIA 40USB) – Allows adjustment of the volume level of all inputs, including the USB input, and it adjusts the headphones level. This lights when the power is on.
- SPEAKER INPUT – Connect the included speaker cable to the SPEAKER OUTPUT connector on the right monitor.
- HIGH-FREQ (STUDIO 50USB) – Adapts both monitor’s frequency response to the damping characteristics of the room.
- INPUT TRIM (STUDIO 50USB) – Adjusts the monitor’s input sensitivity to the audio source signal.
- LED (STUDIO 50USB) – This lights when the power is on.
Getting started
Specifications
Other important information
-
Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
-
Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity,
you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product. -
Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
STUDIO 50USB/MEDIA 40USB
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment. Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU, and Amendment 2015/863/ EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive1907/2006/EC. The full text of the EU DoC is available at https://community.musictribe.com/ EU Representative: Music Tribe Brands DK A/S Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>