OSLO OSP1-05 Portable Air Conditioner User Manual

: June 5, 2024
: OSLO

Table of Contents

Safety Instructions
Function
Identification of Parts
Operation and Settings
Multiple Protection Functions
Handling and Transportation
Installation & Adjustment
Drainage Instruction
Maintenance and Service
End of Season Storage
Troubleshooting
One Year Limited Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Portable Air-conditioner
OSP1-05
Use and Care Manual

Thank you very much for selecting this new model of Portable Air Conditioner, please read this Use and Care Manual carefully before installing and using this appliance. Please keep this Use and Care Manual properly for future reference.
210204

Safety Instructions

Electrical Specifications

All wiring must comply with local and national electrical codes and be installed by a qualified electrician. If you have any questions regarding to the following instructions, please contact a qualified electrician.
The unit must be installed in accordance with national wiring regulations. Check available power supply and resolve any wiring problems before installation and operation of this unit.
For your safety and protection, this unit will be grounded through the power cord plug when plugging into a matching wall outlet. If you are not sure whether the wall outlet at your home are properly grounded, please consult an electrician. If supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid any hazards.
This appliance is not intended for people Cincluding children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Young children should be supervised to ensure that they do not play with the appliance.

WARNING

To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow up these basic precautions:

Indoor use only, it is prohibited to use this unit outdoors or in humid environment such as bathroom etc.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension code.
Never share the power outlet with other appliances.
Never connect or disconnect the power plug with wet hands to avoid electric shocks.
Never turn off the unit by unplugging.
Unplug air conditioner before servicing.
Never dismantle, repair or modify the unit without authorization to avoid body injury or property damage, be sure it repaired by manufacturer or professionals.
Never put any objects into the unit.
Never cover or obstruct air inlet or outlet to prevent overheating.
Never hit or shake the unit to prevent damage.
Never spray water or place the unit near water to prevent electric shocks.
Never place the unit near gas appliances, fire or flammable liquids.
Move and install the unit by two or more people.
Keep children away from the unit.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Cautions

Keep the unit at least 1 meter away from TV or radios to avoid electromagnetic interference.
Do not expose the unit under direct sun light to avoid surface color fading.
Do not tilt the unit for more than 35 degrees or upside-down while transporting.
Place the unit on a flat surface and upright with less than 5 degrees inclination.
The unit operates more efficiently in certain room locations (see Installation and Adjustment)
Keep the drain hose in good condition without flexure then connect with unit.
Manually adjust the vertical and horizontal louvers slightly to protect louvers from any damage.
Empty the condensed drainage pan before putting the unit in storage to prolong the unit lifetime end of the season.
Do not use chemical solvents (e.g. Benzene, alcohol-glazer) to clean the unit surface, do not scratch or damage the unit.
Make sure to cut off the power before disassembling or installing the filter.
Risk of Electric Shock. Disconnect Power Before Servicing Unit.
A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and not repaired.
Use on Single Outlet Circuit Only.

Remark: Do not use this unit in cooling mode if the ambient temperature is higher than 95°F (35°C )

Function

This unit offers cooling, dry, fan and sleep modes, ideal for home and office use.
This unit is with two fan-speed level accessible by panel control and remote control.
Temperature setting range of this unit is 62.6-86°F(17-30°C) ..
This unit is designed with various protection functions such as 24-hour programmable timer, auto condensate circle, super intelligent temperature sensor and water-full control and warning etc.

Identification of Parts

1. Control panel
2. Vertical louvers
3. Horizontal louvers
4. Horizontal louvers connecting rod
5. Aijr outlet frame
6. Front shell
7. Universal wheel
8. Back shell
9. Central connecting rod
10. Vertical louvers connecting rod
11. Main vertical louver
12. Upper filter| 13. Upper drain hole and plug
14. Power cord storage
15. Lower filter
16. Lower drain hole and plug
17. Handle
18. Air discharge and protective vent
19. Chassis
20. Remote control
21. Exhaust hose assembly
22. Exhaust hose adapter
23. Window seal-plate assembly
---|---

Operation and Settings

This section explains proper mobile air conditioner operation.

Control Panel nas
POWER| On/Off button| MODE| Mode button| | Up button
---|---|---|---|---|---

TIMER

o
Timer

1. Turn on the unit.

A. Plug in and all indicators will light up on control panel and reminding music will be on, display window will show ambient temperature ranging from 50-95°F(10- 35°C), will in red color, unit is standby for operation.
B. Press the button, the unit is on with reminding music sounded, °<-~ will in green color, and operate in Cool Mode automatically, emperature set 75.2°F (24°C), fan runs at high speed, and in green color.

2. Select operating mode

Press the button to select a desired mode shown below, and its corresponding indicator will light up.

Under cooling mode, press “Timer” + “ ” buttons together, the unit auto enter into “Sleep” Mode.

3. Adjust temperature

The temperature can be set within a range of 62.6-86°F(17-30°C ) under cooling mode.
Press or buttons to increase or decrease the temperature 1.8°F(1°C) by pressing once.
Press and buttons together to convert Celsius degrees and Fahrenheit degrees and corresponding indicator will light up.

4. Adjust fan speed

Press the button to select a desired fan speed shown below

5. Stand-by

Press the button again, the unit will stop working with reminding music sounded, will be in red color.

Notice: Working principle for each mode and function

Cool mode:

When room temperature is 1.8°F(1°C) higher than setting temperature, the compressor and fan will start working.
When room temperature is 1.8°F(1°C) lower than setting temperature, the compressor will stop working and fan keep working at original speed.
Room temperature can be set within a range of 62.6-86°F (17-30°C ) and fan speed can be adjusted to high or low level.

Fan mode:

Fanruns at set speed and can be adjusted to high or low, compressor do not work.
Room temperature will automatically show on LED display with range 50-95°F (10-35°C) .
Room temperature can’t be adjusted.

Dehumidify mode:

Fanruns at low speed automatically, fan speed and room temperature can’t be adjusted.
Room temperature will automatically show on LED display with range 50-95°F (10-35°C )

Sleep mode:

Under cooling mode, press “Timer” + “ ” buttons together, the unit auto enter into “Sleep” mode.
Fan will turn to low speed automatically and can’t be adjusted.
Set temperature will increase 1°C when unit running in 2 hours, increase 1.8°F(1C) again in another 2-hour working, then keep set temperature unchanged further.
Room temperature will automatically show in LED display with range 50-95°F (10-35°C ) .

Timer Operation

Press “Timer” button to set automatic OFF time while unit is running.
Press “Timer” button to set automatic ON time while unit is off.
The time can be adjusted within a range of 1-24 hours, press or buttons to increase or decrease 1 hour by pressing once.

Remote Control Operation
The Remote control transmits the signal to system.
Button: press this button to start unit when it is energized or stop the unit when it is In operation.
Button: press this button to set unit automatic on and off time af
Button: press this button to select high speed of fan running (except dry and sleep modes)
Button: press this button to select low speed of fan running.
Button: press this button to increase temperature or timer setting.
Button: press this button decrease temperature or timer setting.
Button: press this button to make Celsius degrees and Fahrenheit degrees interchange.
Button: press this button to select “Cool” mode.
Button: press this button to select “Fan” mode
Button: press this button to select “Dry” or “dehumidifying” mode
Button: press this button to select “Sleep” function under cooling mode.

Before using your remote, install the AAA batteries into remote control.

Press and glide the battery cover on the back of the remote control, then you can remove the cover.
Insert two new alkaline AAA batteries into the battery compartment. Be sure to note the proper polarity.
Reattach the battery cover and make sure the locking tab clicks into place.

Be sure to note proper polarity of batteries

Notes:

Use alkaline batteries only. Do not use rechargeable batteries.
When replace batteries, always replace both batteries with new batteries, do not mix old and new batteries.
If the air conditioner will not be used for an extended period of time, remove the batteries from the remote control.

CAUTION
If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water, do not use the remote control if the batteries have any leakage.
If you eat the liquid from the batteries, brush your teeth and see doctor. The chemicals in batteries could cause burns or other health hazards.

Multiple Protection Functions

Anti-freeze protection function
Compressor, water spraying motor will turn off wnen compressors running over 10 minutes and tube temperature (Tp) is continuously =35.6°F (2°C) for 20 seconds under cooling mode, E4 will show on LED display window, the unit initiates the anti-frost protection and all buttons on control panel (except for power button) are inactive. Once the tube temperature =46.4°F (8°C), the protection is relieved to recover into original status, and compressor apply to 3-minute delay protection.
Water-full safety alarm and shut off protection function: Warning sounds when the water volume reached its alarm level in water tank, and unit automatically stops working, both water-full indicator and “FL” on LED window is flashing. You need to drain the condensate for unit to automatically recover operation. (For more information about how to drain, refer to the “Drainage Instruction” please).
Delay protection function of compressor
This unit offers restart protection to compressor. Except that the compressor may start immediately when the unit is energized at first time, there is 3-minute start delay after compressor is shut down.

Handling and Transportation

Handle and move the unit
Hold handles on side panels to move the unit in upright position (As shown in Photo below).
Note:
Make the unit in the upright position whatever handling or moving it. Drain the water in the unit completely to prevent water leakage and wet the floor or carpet before handling or moving the unit.

Installation & Adjustment

1. Installation
Warning:
Keep this mobile air-conditioner in upright position at least 2 hours before first installation.
This air-conditioner may be moved indoors conveniently; keep the unit in upright position while moving it. The air-conditioner shall be placed on flat surface.
Do not install or operate this air-conditioner in bathroom or other wet environments.
1.1 Installation of exhaust hose assembly and its adapter

Take out the exhaust hose assembly and its adapter from plastic bag.
Extend the exhaust hose at one end, screw the round end of adapter into exhaust hose at anticlockwise direction (as Photo)).
Note: Screw adapter into right position, at least 3 laps, to keep good connection of exhaust hose assembly and its adapter (as Photo).

1.2 Installation of the exhaust hose assembly into unit

Determine window seal-plate position, vertical or horizontal direction.
If window seal-plate will be in horizontal position, the slant panel A of adapter should be upwards.
If window seal-plate will be in vertical position and will be at left side of window, the slant panel A of adapter should be at right direction.
If window seal-plate will be in vertical position and will be at right side of window, the slant panel A of adapter should be at left direction.
Take two ends of exhaust hose and its adapter assembly (as Photo).
Put front end of exhaust hose assembly onto jugged position of exhaust outlet of back panel (as Photo).
Remark: Keep the right direction of slant side A of adapter, for ease installation of window seal-plate.
Hold the unit by one hand, carry the exhaust hose assembly with another hand and push it into unit gently, for good lock of two parts. (as Photo)

Remarks:

Keep the right direction of slant side A of adapter, for ease installation of window seal-plate.
Keep exhaust hose assembly be strongly locked by fasteners in exhaust outlet to avoid its fall off

1.3 Installation of window seal-plate

Open the window in half, put the seal-plate into window, determine in vertical or horizontal position according to window open direction. (As Photo)
Extend seal plate parts, adjust it to the length of window and fix it with screws then.

Remarks:

Installation of window seal-plate
• Open the window in half, put the seal-plate into window,
• Extend seal plate parts and adjust it to the length of window, fix it with screws then.

1.4 Installation of the unit

Move the unit together with its exhaust hose assembly in front of the window and keep the unit at least 50cm away from the walls or other objects. (As Photo).
Install the rectangle end of exhaust hose adapter into the corresponding rectangle hole in window seal-plate assembly, fix it with screw and close the window (as Photo).
A. Align the 4 openings on window seal-plate with corresponding 4 openings on exhaust hose adapter and set them together, then slide adapter downwards, to make 2 set of openings locked for 2 parts good connection.
B. Lock self-tapping screw ~4 mm into adapter hole.

Remarks:

Slide the adapter downwards and assure the adapter installed in good position.
Lock the screw tightly to avoid fall off.
Exhaust hose can’ t be bent or with flexure higher than 45 degrees, in order to keep good ventilation of exhaust hose.

Important notes:
The exhaust hose is 280mm-1500mm long and which is determined by the specification of the air-conditioner (s). Do not use prolonged the hose or replace it with other different hoses as this may affect the functions of the air-conditioner. The exhaust hose must be smooth or it may lead air- conditioner overheat and trip because exhaust hose is obstructed.

Drainage Instruction

1. Manual drain:
When the water volume reached its alarm level in water tank, warning sounds and unit is automatically stop working, both water-full indicator and “FL” is flashing on LED display window.

Put the tray below the water outlet at the back of the unit.
Screw off the drain cover, unplug the water stopper for water flow into the tray.
Plug in stopper and screw the water cover tightly onto water outlet after drainage.

Notes:

Protect the drain cover and water stopper properly.
Move the unit carefully to avoid the leakage if it is necessary.
Tilt the unit slightly backwards when draining.
Block the drain hole as soon as possible before the tray is full if it can’ t hold all water in the unit to prevent the water leakage and wet the floor or carpet.
Water stopper and drain cover must be tightly installed, to avoid new condensate to wet the floor or carpet when the unit re-starts working.

2. Continuous drain:

Screw off the drain cover and unplug the water stopper (as Photo).
Connect drain-hole with 13mm PVC drain hose, as deep as possible to avoid leakage (as Photo).
Pull the drain hose to bathroom or outdoor.

Notes:

Drain hose must be installed before unit starts working.
It is suggested to use manual drainage when unit in cooling mode, to ensure enough water to recycle in the unit to cool condenser and enhance cooling performance.
Put the drain hose in an inaccessible place, not higher than drainage hole and keep drain hose straight without any flexure.
Keep the drain cover and its stopper properly installed when continuous drainage is adopted.

Maintenance and Service

Remark: Turn off the unit and pull out the plug before maintain or send the unit to service center.

Surface cleaning
Clean the unit surface with wet and soft cloth, but do not use chemical solvents such as alcohol and gasoline to avoid any damage to unit.
Filter cleaning
Clean the filter every two weeks, otherwise it would influence the unit performance if filter clogged with dust.

Grip the filter handle and take it out gently in correct direction (as Photo).
Clean the filters gently in warm water (about 104°F (40°C) ) mixed with detergent, and dry in the shade (as Photo)
push filter in even force gently into correct place to avoid any damage.
Notes:
Do not squash the mesh.
Do not hit the mesh with sharp objects or brush.

End of Season Storage

Screw off the drain cover, and then pull out the stopper to drain water completely.
Note: the tilt angle of the unit must be = 30 degrees.
Keep the unit running in fan mode half day to dry inside of unit completely to prevent from going mouldy.
Turn off the unit, pull out plug then wrap the power cord around the wire-winding pillar, insert the plug into the universal fixing hole at the back panel of the unit, install the water plug and drain cap.
Remove the heat exhaust hose assembly, clean and keep it properly.
Notes:
• Hold the exhaust hose assembly with both hands when removal.
• Push the fasteners aside on exhaust air outlet using your thumbs, then pull out exhaust hose assembly.
Pack the air-conditioner properly with soft plastic bag and put it in dry place with appropriate dust-proof measures and keep the unit away from children.
Take out the batteries from the remote control and keep unit in a try place, including all accessories well.

Troubleshooting

Please check the unit and suggestions below before asking for professional service, but never dismantle or repair the unit by yourself, it may cause harm to you and your property.

Trouble	Cause	Remedy
The unit fails to start up	Power supply failure	Connect the unit to a live

socket and turn it on.
Water-full and its Indicator lighting up| Drain the water stored in the unit.
Ambient temperature too low or too high| It is recommended to use this unk between 50-951? r 10-35t 1
The room temperature is lower than the set temperature In cooling mode.| Change the set temperature
Bad cooling effects| There Is direct sunlight| Close the curtain
The doors and windows are open, the room is crowded or there are other heat sources| Close the door and window, remove other heat sources, and add new air-conditioners
Ditty titer| Clean or replace the filter.
Air Inlet or air outlet clogged| Remove the obstruction
High noise level| The unit is being placed at uneven surface.| Put the unit at a flat and firm place (may reduce noise)
The compressor does not work| Initiation of overheat protection.| Wait until the temperature decrease. the unit will re-start automatically
The remote control does not work| Too long distance| Bring the remote control close to the air-conditioner and ensure airs at signal receptor on unit.
The remote control didn’t aim at signal receptor on unit.
The batteries have no electricity| Replace the batteries
LED displays error code ‘E1| Tube temperature sensor failure| Check the tube temperature sensor and related circuits
LED displays error code Tr| Room temperature sensor failure| Check the room temperature sensor and related circuits
LED displays error code Te| Anti-freeze protection| Restore the functions automatically once anti-freeze protection Is over.
Water-full indicator lights| The water in chassis is full| Drain the water and re-start the unit

One Year Limited Warranty

NEPO USA warrants the accompanying Air Conditioner to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of One (1) year from the date of original retail purchase in the United States.
If the unit exhibits a defect in normal use, NEPO USA will, at its option, either repair or replace it, free of charge within a reasonable time after the unit is returned during the warranty period.
As a condition to any warranty service obligation, the consumer must present this Warranty Certificate along with a copy of the original purchase invoice.

THIS WARRANTY DOES NOT COVER:

Damage, accidental or otherwise, to the unit while in the possession of a consumer not caused by a defect in material or workmanship.
Damage caused by consumer misuse, tampering, or failure to follow the care and special handling provisions in the instructions.
Damage to the finish of the case, or other appearance parts caused by wear.
Damage caused by repairs or alterations of the unit by anyone other than those authorized by NEPO USA.
Freight and Insurance cost for the warranty service.
Filter and Accessories

ALL WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY. NEPO USA DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES AND IN NO EVENT SHALL NEPO USA’S LIABILITY EXCEED THE RETAIL VALUE OF THE UNIT FOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY WITH RESPECT TO THIS UNIT.
This warranty covers only new products purchased from our authorized dealers or retailers. It does not cover used, salvaged, or refurbished products. As some states do not allow the limitation or exclusion of incidental or consequential damages, or do not allow limitation on implied warranties, the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

For Technical Support and Warranty Service
Please Call 866-669-9998
www.oslousa.com

Correct Disposal of this product
This marking indicates that the product should not be disposed with other household wastes throughout the world. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.