behringer DX626 Pro Mixer Professional 3-Channel DJ Mixer with BPM Counter and VCA Control User Guide

behringer DX626 Pro Mixer Professional 3-Channel DJ Mixer with BPM

Counter and VCA Control

Important Safety Instructions

WARNING

• Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
• This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
• This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Caution

• To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.
• To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions.
• Repairs have to be performed by qualified service personnel.

1.  Read these instructions.

2.  Keep these instructions.

3.  Heed all warnings.

4.  Follow all instructions.

5.  Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Use only attachments/accessories specified by
    the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.  Unplug this apparatus during lightning storms or when unused for long periods of time.

14.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed
    to rain or moisture, does not operate normally, or has been dropped.

15.  The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.

16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

17.  Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.

18.  Do not install in a confined space, such as a book case or similar unit.

19.  Do not place naked flame sources, such as lighted candles, on the apparatus.

20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.

21.  This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

PRO MIXER DX626 Controls

Controls

1. The MIC INPUT is the balanced XLR connector for your dynamic microphone.

2.  The GAIN control is used to line up the input signal of each channel.

3.  Each input channel has a 3-band equalizer
   (HIGH, MID and LOW) with kill characteristic. Thus, the signal can be lowered to a much greater extent (-32 dB) than it can be raised (+12 dB).

4. The MIC/LINE–PHONO switch allows you to choose between the microphone signal and the line or phono signal on channel 1. The position of the rear panel PHONO/LINE switch (see (21)) determines whether the input is switched to the phono or the line level setting of the right-hand switch position.

5.  On channels 2 and 3 you determine the input signals with the PHONO/LINE switch. “Phono” is intended for connecting a turntable. “Line” must be selected for all other signal sources (e. g. CD or MD players).

6.  Adjust the channel volume with the CHANNEL fader.

7.  The PRO MIXER has a talkover function. This feature is actually quite simple:
   by pushing the TALK button, the signal of the other input channels is lowered (TALK LED lights up), enabling your voice to be heard more clearly over the microphone.

8.  The MASTER control determines the output volume at the MASTER output (see (27)).

9.  A BALANCE control for the MASTER output is for shaping the stereo image.

10.  The BOOTH control determines the output volume at the BOOTH output (see (26)).

11.  The CUE control determines the volume of the headphones signal (PFL signal).

12.  With the three buttons CH-1, CH-2 and CH-3, you determine the signal source for the headphones signal. You can preview the channels individually or listen to all three simultaneously.

13. The MASTER/CUE fader allows you to control the volume ratio between the input channels’ signal and the MASTER signal on your headphones.

14. Here you can read the volume level of the PFL and MASTER signals from three, 10-character LED displays. The lower LED chain displays the PFL signal and the two upper LEDs display the right and left MASTER signals.

15. The PRO MIXER DX626 BPM counter is an extremely useful feature. It ensures smooth transition from one track to the next, making your session an absolute success.
    It can calculate the various tempi of tracks in bpm (beats per minute). The left display indicates the tempo on channel 2 and the right display shows the tempo on channel 3.

16. The CROSSFADER is for crossfading between channels 2 and 3.

17.  This is the connector for a commercially available 12-volt BNC lamp.

18.  Turn on the DX626 with the POWER button.

19.  The HEADPHONES connector enables you to preview pieces of music (PFL signal) on your headphones. Your headphones should have a minimum impedance of 32 ohms.

20. This is the INPUT 1 input for channel 1. It can be switched to phono or line input sensitivity.

21. With the PHONO/LINE switch at the channel 1 input you can choose between LINE and PHONO input. However, in order to do that, the MIC/LINE–PHONO switch on the front panel must be switched to LINE–PHONO (see (4)).

22. The PHONO inputs from channels 2 and 3 are also for connecting turntables.

23. These are the LINE inputs from channels 2 and 3 for connecting tape decks, CD or MD players etc.

24. The GND connectors ground the turntables.

25. Using the TAPE output you can record your music by connecting devices such as tape decks, DAT recorders etc. Unlike the MASTER and BOOTH outputs, the output volume is fixed, making it necessary for you to adjust the input level on the recording device.

26.  The BOOTH output gives you another possible way to connect an amplifier. It is controlled by the BOOTH control on the front panel. Through this output you can operate monitor speakers or even provide another area with sound.

27. The MASTER output is for connecting an amplifier and is adjusted using the MASTER control.

28.  This is the connector for the power cable. This is where the advantage of the sophisticated internal power supply can be seen: the pulse behaviour of each amplifying circuit is mainly determined by the voltage reserves available.

29. FUSE HOLDER / VOLTAGE SETTING.

30. SERIAL NUMBER.

Specifications

Important information

1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.

2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity,
   you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.

3.  Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street, Las Vegas NV 89118, United States
Phone Number: +1 702 800 8290

PRO MIXER DX626

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU,Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive
1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark

References

• Music Tribe
• Music Tribe
• Music Tribe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>