Dongguan Yuzhenrong Trading LR338 Wireless Mouse User Manual

Dongguan Yuzhenrong Trading LR338 Wireless Mouse

PACKING LIST

1.  Mouse x1
2.  USB Receiver x1
3.  User Manual x1
4.  Charging Cable x1
5. Instruction Card x1
6. FAQ Card x1

DIAGRAM

1.  Left Button
2.  Right Button
3.  Scroll Wheel
4.  DPI Button
5.  Forward Button
6.  Backward Button
7.  Trackball
8.  Charging Port
9.  Mode Switch Button
10.  Light Switch Button
11. On/Off

FEATURES

•  Multi-mode Switch. The mouse supports BT1, BT2 and 2.4G modes, which can be connected with 3 devices. You can switch mode via the
  bottom mode switch button.

• 5 Levels DPI. 100/200/400/800/1200. Short press DPI button to switch in cycle. The default DPI is 400.

•  Power-saving mode. the mouse will automatically enter into sleep mode without operation of 30min. Press any button to wake it up.

•  Rechargeable Design. Built-in 500mAh rechargeable lithium battery. The mouse can be recharged via the included charging cable when in low battery level.

•  RCB Backlight. Short press the bottom light switch button to switch among 5 light modes. The last light mode is light off.

INSTRUCTIONS

First Use

•  Take out the mouse and turn on the bottom switch.
•  The mouse default is BT1 mode with its indicator light flashing slowly. Long press the mode switch button for 3s, and the mouse will enter into Bluetooth pairing state after the indicator light turns to flash quickly.
•  Turn on the Bluetooth on your laptop. For Window 7 or earlier system, please select “BT3.0 Mouse”. For Window 8 or later system, ioS, Macos, please select “BT5.0 Mouse”. You can use after successful connection.

Mode Switch

•  BT2 Mode. Short press the bottom mode switch button to switch the mouse to BT2 mode. BT2 indicator light will flash slowly. Then refer to the BT1 connection steps for connection.
•  2.4G Mode. Short press the bottom mode switch button to switch the mouse to 2.4G mode, and the indicator light will flash slowly. Plug the USB receiver in the computer port, and the
  the mouse is workable after it’s paired with the computer automatically.

Note
Forward and backward buttons are not available on Mac OS devices.

SOLUTIONS FOR 2.4G CONNECTING PROBLEMS

Repeat the pairing steps after confirming that the mouse is under in 2.4G mode. Press left button, right button and scroll wheel simultaneously for 3-5 seconds, and release them after the indicator light flashes quickly. Then plug USB receiver in computer port for pairing.

SOLUTIONS FOR BTI/BT2 CONNECTING PROBLEMS

Reboot the mouse and empty the Bluetooth list on your computer. Repeat the connecting steps according to the instructions of BT1/BT2 connection.

NOTE
if the product is still unworkable after above solutions. you could repeat those steps fora few times. If your problem cant get solved yet, please contact our Customer Service for help (Email: csforcustomer@gmail.com).

FCC STATEMENT

Any Changes or modifications not expressly approved by the nparty responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

•  This device may not cause harmful interference, and
•  this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Note: This equipment has been tested and found to comply with the limits for a Class 5 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pr ovide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference radio communications. However, there is no guarantee that interference will not ocCur in a particular installation.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device

The device has been evaluated to meet general RF exposure requirements. The device Can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>