Neo Neon FCB-XM-3D-MS0120-7FT 7Ft 8-Function Multicolor Cone Tree User Guide
- June 5, 2024
- Neo-Neon
Table of Contents
THE GUIDELINE FOR 7Ft 8Function Multicolor Cone Tree
Model No.: FCB-XM-3D-MS0120-7FT
Adapter Rating: Input 100-240V-50/60Hz 0 2A Output 29V 300mA
IMPORTANT SAFETY INSTRUCTIONS
A) READ AND FOLLOW ALL SAFETY INSTRUCTIONS
b)Do not use seasonal products outdoors unless marked suitable for indoor and
outdoor use. When products are used in outdoor applications, connect the
product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not
provided, contact a qualified electrician for proper installation.
c) This seasonal use product is not intended for permanent installation or
use.
d)Do not mount or place near gas or electric heaters, fireplace, candles, or
other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place it
on sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on any wire.
g)Unplug the product when leaving the house, when retiring for the night, or
if left unattended.
h)This is an electric product-not a toy! To avoid the risk of fire, burns,
personal injury, and electric shock, it should not be played with or placed
where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from the cord, wire, or light
string.
k)Do not close doors or windows on the product or extension cords as this may
damage the wire insulation.
I) Do not cover the product with cloth, paper, or any material not part of the
product when in use.
m) This product is equipped with non-replaceable lamps. Do not twist lamps.
And if non-replaceable lamps burn out or are damaged, do not try to repair or
replace them, they shall be discarded.
n)Read and follow all instructions that are on the product or provided with
the product.
WARNING. When using outdoor use portable lighting products, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:
READ ALL INSTRUCTIONS
(a) Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet to be used for the outdoor use of flexible lighting products. Receptacles are available having built-in GFCI protection for this measure of safety.
HOW TO ASSEMBLE THE TREE
| PART | DESCRIPTION. | QUANTITY |
|---|---|---|
| A | Tree Body | 1 |
| B | Center Pole | 4 |
| C | Base | 1 |
| D | Ground Stake | 4 |
1. Open the Base (C). Attach the Center Poles(B) together to create one prop
assembly, and insert the assembled pro into the Base (C). And secure the frame
with clips provided.
2. Adjust the Tree body(A), and fix it well at the top of the frame.
3. Place the Star on the top of the assembled tree.
4. If you are using this tree as outdoor decoration, use the provided Ground
stakes OD) to secure the tree to the ground.
Features
1| Steady
2| Quick Flash
3| Slow Flash
4| Quick Fade
5| Slow Fade
6| Quick Flash/Fade
7| Slow Flash/Fade
8| Combination
Maintain and Care
You should maintain and care for the tree light kit in the following areas before storage.
- Clean and wipe all the metal parts. Use rust removal products (not included) such as WD-40 to clean any rusty spots if there are any when powder coating is damaged. (Note: Follow the rust removal product instructions when using it.)
- Repaint any spots where the paint on the metal part is damaged. (Note: Paint not included)
- Clean and wipe the light strands and all other parts. (Important: DO NOT let any part of this product submerge or soak in water.)
- Be sure all parts are dry before storage.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may casue harmful interference to radio communications, However,
there is no guarantee that interference will not occur in a particular
installation. If the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/ TV technician for help.