SVP 607620 Bandpass Filters User Manual

SVP 607620 Bandpass Filters

Content

1. Overview
2. Trim Points Layout
3. Trim Tools
4. Trim Points

Warnings

  * Please read the Safety and Operation document.
  * Do not attempt to act on the Trim Points to tune or re-tune a Filter unless you are familiar with Bandpass Filter tuning. A tuned Filter can be easily mistuned, with no easy possibility to roll-back, with few and limited movements on the Trim Points.
  * Do not start tuning or re-tuning a Filter prior to carefully reading both its User Manual and Tuning Instruction. Permanent damage may occur.

Overview

Trim Points Layout

Trim Tools

Trim Points

Input / Output Couplings (KEI / KEO)

1. Tune: Trim the Coupling screw (4 mm Allen) according to the Tuning Instructions.
   • Turning the Coupling screw clockwise the coupling increases, and vice versa.

Tunings (T1, T2…)

1. Open: Manually unscrew and remove the red lid.
2.  Tune: Trim the Tunings screw (4 mm Allen) according to the Tuning Instructions.
   • Turning the Tuning screw clockwise the tuning frequency decreases, and vice versa.

Warnings

  * Use caution when approaching the end of stroke on both sides of the Tuning screw: risk of permanent damage in case of forcing.
  * Never use electric screwdrivers or drills on the Tunings.

3. Close: Manually screw the red lid.
   • The Tunings screws are frictioned, and they do not have any locking.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>