AIROLITE K6744 Series Drainable Louvers Instruction Manual

AIROLITE K6744 Series Drainable Louvers

Product Information

Part Number: 475583

Model: K6744X

This product is a louver designed for installation, operation, and maintenance purposes. It is essential to follow the provided instructions for proper handling and usage to ensure safety and optimal performance.

Safety Warning
Improper installation, adjustment, alteration, service, or maintenance of this product can result in property damage, injury,or even death. It is crucial to read and understand the installation, operating, and maintenance instructions thoroughly before attempting any installation or servicing. Receiving and Handling
Upon receiving the louver(s), it is important to inspect them carefully for any visible or concealed damage. If any damage is found, make sure to record all necessary information on the bill of lading and file a claim with the final carrier. Additionally, ensure that all parts of the shipment, including accessories, are present and accounted for.

Storage
Proper storage of the louver(s) is essential to maintain their condition and functionality. Store them in a dry and well-ventilated area, away from direct sunlight and extreme temperatures. Avoid placing heavy objects on top of the louvers to prevent any potential damage. Maintenance
To ensure the longevity and optimal performance of the louver(s), regular maintenance is required. Follow the provided maintenance instructions to clean and inspect the louvers periodically. Proper lubrication of moving parts may also be necessary as outlined in the maintenance instructions. Warranty
The product is covered by a warranty. Please refer to the warranty terms and conditions provided separately for detailed information on coverage, limitations, and claim procedures.

Product Usage Instructions

1. Before attempting any installation or servicing, thoroughly read and understand the installation, operating, and maintenance instructions provided.
2. Upon receiving the louver(s), carefully inspect them for any visible or concealed damage. If any damage is found, record the necessary information on the bill of lading and file a claim with the final carrier.
3. Ensure that all parts of the shipment, including accessories, are present and accounted for.
4. Store the louver(s) in a dry and well-ventilated area, away from direct sunlight and extreme temperatures. Avoid placing heavy objects on top of the louvers.
5. Follow the provided maintenance instructions to clean and inspect the louvers periodically. Proper lubrication of moving parts may be required as outlined in the maintenance instructions.
6. Refer to the separately provided warranty terms and conditions for detailed information on coverage, limitations, and claim procedures.

Part # 475583
Installation, Operation and Maintenance Instructions Model K6744X
This manual is the property of the owner, and is required for future maintenance. Please leave it with the owner when the job is complete.

RECEIVING AND HANDLING
Upon receiving the louver(s), check for both obvious and hidden damage. If damage is found, record all necessary information on the bill of lading and file a claim with the final carrier. Check to be sure that all parts of the shipment, including accessories, are accounted for.

SAFETY WARNING:
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating, and maintenance instructions thoroughly before installing or servicing this equipment.

STORAGE
The louvers and components are shipped in semi-enclosed wooden crates, and should be left in the crate until ready for installation. Inside storage is preferable. If outside storage is required, the crates should be blocked up or otherwise elevated from the ground or pavement, and covered securely with waterproof coverings of plastic film. Wraps “Coverall” or “Visqueen” film sheeting is recommended as adequate protection, however, any plastic film waterproof sheeting of equal quality is acceptable. Louvers and components are not wrapped or protected from moisture or dirt within the wooden crates. If prolonged storage is anticipated, either inside or out in the weather, adequate steps should be taken to protect the units and their finishes. It is also possible to order individual-section plastic wrap when long-term storage is anticipated. Handling to and from storage should be accomplished with the wooden crates intact. Physical damages, marred finishes, loss of loose parts and fasteners, and separation of associated components may occur if crates are dismantled and louver components removed to facilitate storage.

GENERAL NOTES:

1. IT SHALL BE THE RESPONSIBILITY OF THE PERMIT HOLDER TO VERIFY THE STRUCTURAL INTEGRITY OF THE EXISTING STRUCTURE TO SUPPORT THE LOADS SUPERIMPOSED BY THE LOVERS.
2. INSTALLER TO PROVIDE SEPARATION OF DISSIMILAR MATERIALS AS REQUIRED.
3. WOOD SUBSTRATE TO BE MINIMUM G – 0.42 DENSITY.
4. CONCRETE SUBSTRATE TO BE MINIMUM 3,200 PSI.
5. STEEL STUD OPENINGS (16 GA MINIMUM THICKNESS) TO BE MINIMUM Fy = 33 ksi
6. STRUCTURAL STEEL OPENINGS (1/4″ MINIMUM THICKNESS) TO BE MINIMUM Fy = 36 ksi.

MAINTENANCE

Stationary or fixed blade louvers require no maintenance to remain functional. The louver finish may be subject to deterioration dependent solely upon the environment in which sun controls are installed. Appearance and longevity of the finish may be greatly extended by an occasional cleaning, the frequency of which, is again solely dependent upon the environment. Proper cleaning may be accomplished with the use of a light scrubbing action, used in conjunction with a good grade of common household mild detergent. Harsh acidic or caustic cleaners are not recommended. Under no condition should the louver or component finish be scrubbed with an abrasive cleaner or apparatus.

WARRANTY

Airolite warrants this equipment to be free from defects in material and workmanship for a period of one year from the shipment date. Any units or parts which prove to be defective during the warranty period will be repaired or replaced at our option. Airolite shall not be liable for damages resulting from misapplication or misuse of its products. Airolite will not be responsible for any installation or removal costs. Airolite will not be responsible for any service work or back charges without prior written authorization.
Copyright © 2012 The Airolite Company, LLC Part# 475583 June 2012 Rev 1

The look that works.
P.O. Box 410, 525 Western Road, Schofield, WI 54476-0410 USA
715.841.8757 • fax 715.841.8773 • www.airolite.com

Copyright © 2012 The Airolite Company, LLC Part# 475583 June 2012 Rev 1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>