TensCare Knee Pain Fabric Joint Electrode Instructions
- June 3, 2024
- TensCare
Table of Contents
TensCare Knee Pain Fabric Joint Electrode
Conductive Garment for use with TensCare TENS & EMS units.
- For single-patient use only.
- Universal size, supplied with adapter lead.
- Supplied with one pack of two reference electrode pads (50 x 90 mm electrodes).
TensCare have altered the specification of the KneeStim to improve performance:
- We have changed the fabric to a higher silver content to give improved contact.
- We now supply self-adhesive reference electrodes, to give a more reliable current distribution.
Instructions for Use
- Ensure that the stimulator is turned OFF.
- Insert one pin connector (from one lead pair) into the connector attached to the KneeStim, and the other (from the same lead pair) into the connector on the electrode pad.
- The KneeStim should be worn slightly damp to improve current flow.
- Apply the garment
- Place the electrode pad on the same limb as the KneeStim.
- If necessary, hand wash the KneeStim and dry flat at room temperature.
Caution
If being used for pain management for Diabetic Neuropathy or other conditions where it is reduced or no sensory sensation then there is a small risk that reduced or uneven electrical contact may cause irritated or broken skin. Care needs to be taken to monitor the skin condition under the garment at frequent intervals.
Tenscare Ltd.
9 Blenheim Roád, Epsom Surrey KȚ19 9BE, UK +44 (0)1372 723 434
www.tenscare.co.uk.
Advena Ltd.
Tower Business Centre 2nd Flr, Jower Street, Swatár, BKR 4013, Malta
TensCare Europe BV
Juliana van Stolbergstraat 52 1723LD Noord-Scharwoude, Netherlands.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>