JVC Black Flat and Foldable Colorful Flats On Ear Headphone-Complete Features/Instruction Guide
- June 5, 2024
- JVC
Table of Contents
JVC Black Flat and Foldable Colorful Flats On Ear Headphone
Specifications
- SPECIAL FEATURE : iOS-phone-control, Lightweight, Foldable
- BRAND : JVC
- COLOR : Black
- CONNECTIVITY TECHNOLOGY : Wired
- ITEM WEIGHT: 2.33 ounces
- PRODUCT DIMENSIONS: 8.66 x 1.18 x 6.22 inches
- ITEM DIMENSIONS LXWXH: 8.66 x 1.18 x 6.22 inches
- DEPARTMENT: Electronics
Introduction
The JVC HAS160 FLATS are attractive, tiny headphones with a narrow headband and smooth, soft ear pads. The earpieces pivot to allow the headphone to lie flat, making it ideal for listeners who like a headband/on-the-ear design but want a lightweight, readily packable headphone. The headphones produce clean, crisp sound thanks to a 30mm Neodymium driver in each earpiece. Furthermore, the soft ear pads improve sound quality by offering a seal against ambient noise. The JVC HAS160 Flats are available in six different colors to match your iPod: black, silver, red, purple, blue, and pink. A four-foot (1.2m) wire and an iPhone-compatible connector are included with the headphones. 12-24,000Hz is the frequency response.
HOW TO PAIR
1For roughly 3 seconds, press and hold the buttons on the L (left) and R (right) headphones. 2The L and R earphones’ power is turned on. Release your fingers from the buttons when the L indicator begins to flash rapidly and alternately between red and white (or when a voice message saying “Pairing mode” is heard).
HOW TO RESET
- To switch off the power, press the button on both earbuds.
- For around 20 seconds, press and hold the L earphone’s button.
- For around 20 seconds, press and hold the R earphone’s button.
- Remove both earbuds from the charging case and place them back in.
HOW TO CONNECT
Using the JVC car stereo’s auto-connect option, you may do this quickly. Step 1: Connect your iPhone to the receiver’s USB port. Step 2: Verify the passcodes on both your phone and the receiver, then use the volume knob to select PAIR. It’s now time to sync your iPhone with your JVC vehicle stereo.
Frequently Asked Questions
-
Is there a microphone on JVC headphones?
It comes with a microphone/remote that you may use with your chosen device. For sports and active lifestyles, ear clip headphones with Mic/Remote are suitable. They’re available in four different colors and have an adjustable clasp for a secure fit. -
My JVC headphones won’t connect to my iPhone?
Make sure the BLUETOOTH device is within 1 meter of your headphones when pairing. Pair the BLUETOOTH device by turning it on. Remove the pairing information from the BLUETOOTH device list and re-pair.” Take precautions. -
What’s the deal with my JVC headphones flashing red?
The connection between the System and the BLUETOOTH device is not formed if the indicator flashes slowly in red. Select System on the BLUETOOTH device to connect in this scenario. -
What’s wrong with one of my JVC earbuds?
Reduce the number of apps running on the connected BLUETOOTH device. Switch on the system after recharging it. Remove the earphones from the charging case and re-insert them. Make sure the earbuds are fully inserted into the charging case before closing it. -
Why are my JVC headphones not working?
Try performing a hard reset: For around 10 seconds, press and hold both the power and volume buttons (and possibly the other two as well) and then release. Check to see if the earbuds display that they are charging (with the cord inserted, of course) or that they turn on when the Power button is hit. -
How can I pair my JVC Bluetooth headphones with my iPhone 11?
Use a Bluetooth accessory to connect your device. Go to Settings > Bluetooth on your device and turn on Bluetooth. You’ll have to stay on this screen until you’ve finished pairing your item. Once your item has been installed and is in discovery mode, it will appear on your device. -
What does JVC’s Full pairing mean?
I’ve never used an Android phone before, so I could be absolutely wrong, but… My best guess is that “FULL” signifies you’ve already linked as many Bluetooth devices as possible to your JVC stereo. -
How can I connect my JVC Bluetooth speaker to my phone?
On the opposite speaker, press and hold the TWS Button for roughly 5 seconds. The LED indication will alternate between green and blue flashing. The two speakers will then be connected automatically. After the pairing is complete, you will hear a signal sound. -
When it comes to JVC headphones, how long do they last?
Assuring a precise sound and comfort fit. Long battery life – up to 14 hours on a single charge. You may listen wirelessly for up to 4 hours, then charge for another 10 hours anytime or anyplace with the tiny carrying/charging case. The battery lasts for a total of 14 hours. -
What’s the best way to get my JVC headphones to work?
Hold the L (left) and R (right) earphone buttons for around 3 seconds. You can hear the device’s power while the L and R earbuds are on. Bluetooth will now be available on the BLUETOOTH device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>