HARDWARE MACHINERY 68167 High Pressure Washer User Manual

HARDWARE MACHINERY 68167 High-Pressure Washer

Imported by:
Trademark Industries Inc.
380 Markland Street
Markham, ON L6C 1T6
www.trademarkindustriesinc.com

Illustration of appliance

1. High pressure hose
2. Water outlet
3. ON/OFF switch
4. Power cord hanger
5. Handle
6. Trigger gun holder
7. Wheels
8. Hose lock
9. Safety lock
10. Trigger gun
11. Spray lance
12. Coupling
13. Water inlet
14. Lance holder
15. Hose hanger
16. Accessory storage
17. Power cord
18. Filter

Spare parts are subject to the specific model. The right of modification is reserved.

GENERAL INSTRUCTIONS

This high-pressure washer is designed for domestic use only:

1. To clean cars, motorbikes, caravans, bicycles.
2. To clean patios, fences, garden walls, pathways, driveways and house facades, particularly useful for cleaning blocked driveway.
3. To remove of algae and moss from roofs, brickwork and guttering.
4. To clean garden tools and machinery, furniture and barbecues.
5. To clean hygienic of animal pens and their surrounding area. With accessories, replacement parts and detergents approved by factory.
   Observe the instructions provided with these detergents.

The packing material can be recycled. Please do not place the packaging into the ordinary refuse for disposal, but arrange for the proper recycling. Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances.
Please dispose your old appliances using appropriate collection systems.
Read symbols in the operating instructions.

Danger: immediate danger that can cause severe injury or even death.

Warning: possible hazardous situation that could lead to severe injury or even death.

Caution: possible hazardous situation that could lead to mild injury to persons or damage to property. The high-pressure washer may not be directed at persons, animals, live electrical equipment or at the appliance itself. Protect the appliance against frost.

SAFETY INSTRUCTIONS

DANGER

1. Never tough the mains plug and the socket with wet hands.

2. The appliance must not be used if the power cord or important parts of the appliance, e.g.
   high-pressure hoses, trigger gun or safety devices are damaged. Please arrange for it to be replaced immediately by an authorized repair agent or a skilled electrician.

3. The appliance may not be used in areas where a risk of explosion is present.

4. The high-pressure washer must not be directed at other persons or directed by the user at him/herself to clean clothing or footwear.

5. If the appliance is used in hazardous areas (e.g. filling stations) all of the safety provisions and operating instructions detailed in this manual must be observed.

6. Never use the appliance to clean objects containing hazardous substances.

7. Vehicle tyres or tyre valves are susceptible to damage from the high-pressure washer and may burst.
   The first indication of this is a discoloration of the tyre. Damaged vehicle tyres/tyre valves are highly dangerous. Ensure that a distance of at least 30c m is observed when cleaning with the washer.

8. Risk of explosion. Do not spray flammable liquids. Never draw in fluids containing solvents or undiluted acids. This includes petrol, paint thinner and heating oil. The spray mist thus generated is highly inflammable, explosive and poisonous. Do not use acetone, undiluted acids or solvents as they are damaging to the materials from which is the appliance is made.

WARNING

1. The mains plug and the coupling of an extension cable must be watertight and must never lay in the water.

2. Unsuitable extension cables can be hazardous.
   Only use extension cables outdoors which have been approved for this purpose labeled with a sufficient cable cross-section: 1-1 0m:1.5mm2, 10-30m: 2.5mm2

3. Always fully unroll electrical cables.

4. High-pressure hoses, fixtures and couplings are important for the safety of the appliance. Only use high-pressure hoses, fixtures and couplings recommended by the manufacturer.

5. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities. The appliance must not be operated by children or persons who have not been instructed accordingly. Children should be supervised to prevent them from playing with the appliance.

6. The operator must use the appliance correctly. When working with the appliance, he must consider the local conditions and pay due care and attention to other persons, in particular children who are nearby.

CAUTION

1. Do not use the machine if the persons nearby do not wear safety protection device.
2. Wearing protective clothing and safety goggles to protect against splash back containing water or dirt.
3. Create stability for the appliance prior to all work on or with the appliance to prevent accidents or damage. The stability of the appliance is warranted when it is placed on to an even surface.
4. For safety reasons, we recommend that you operate the appliance only via an earth-leakage circuit breaker (max. 30mA).
5. Make sure that the power cord or extension cables are not damaged by running over, pinching, dragging or similar. Protect the power cable from heat, oil and sharp edges.
6. Never leave the appliance unattended when it is in operation.

OPERATION\

Special accessories expand the possibilities of using your appliance.
Please contact the dealer for further information. Install accessories before start-up.

1. Install coupling for water connection. (pie A). Screw the coupling to the water connection on the appliance.

2. Install high-pressure hose (pie B, pie K). Insert the high-pressure hose tightly in to coupling on the appliance, it will lock in audibly. Note: make sure the connection nipple is aligned correctly.
   Check the secure connection by pulling on the high-pressure hose.

3. Install trigger gun holder and accessory storage (pie C). Insert trigger gun holder and accessory storage. Then push down all the way.

4. Install spray lance (pie F). Push the spray lance into the trigger gun and fasten it by turning it through 90 degrees.

WATER SUPPLY
Impurities in the water can damage the high-pressure pump and accessories.
All high-pressure washer (except hot water system) use the cold water.
The suitable water temperature is SoC to 60oC.

WATER SUPPLY FROM MA INS
Observe regulations of water supply.
For connection values, use a fiber-reinforced water house(not included) with a standard coupling, normally the length is Sm, connect the water house to the appliance and water supply.

1. Open the water tap
2. Unlock the lever on the trigger gun
3. Pull on the lever of the trigger gun
4. Turn on the appliance (pie G. On: open, Off: close)

STARTUP
Dry runs lasting longer than two minutes lead to damages to the high-pressure pump.
If the appliance does not build up pressure within two minutes, switch it off and proceed as instructed in the ‘Troubleshooting’.
The trigger gun is subjected to recoil force when the water washer is discharged.
Make sure that you have a firm footing and are also holding the trigger gun and spray lance firmly. The spray lance is adjustable from stream to fan pattern for easy cleaning. (pie H).

CAUTION
Prior to cleaning, make sure that the high-pressure washer is placed safely on level ground.
Wear protective goggles and protective clothing during the cleaning process.
Notes: Release the lever of the trigger gun, the device will switch off again.
High-pressure washer remains in the system.

Working with Detergent
Use detergent when cleaning. Remove the lid from the foam nozzle and fill the detergent (pie P). Then put it back onto the trigger gun.
Notice: For using detergent, take off the lance and insert an authorized foam nozzle (as Pie. E). Use safety lock in interrupting operation. Take off the lance and put into accessory storage. Insert the gun into the holder. (as Pic.Q).

Finish Operation

1. Turn off tap.
2. Press the lever on the trigger gun to release any remaining pressure and water in the system.
3. Pull out the mains plug.
4. Store the water hose and high-pressure hose.

MAINTENANCE AND CARE

Turn off the appliance and remove the mains plug prior to any care and maintenance work. Prior to longer periods of storage, pull out the filter (18) in the detergent bottle and clean under running water (pie J). Use the needle to clean the residue (pie M).
In winter, please do not put the machine outside without draining the water to avoid the damage to the machine. Just put it in a room with frost prevention.

TROUBLESHOOTING

The content in this instruction manual (include accessories) is kept the final modifying and explanation rights.
Appliance is leaking: Slight leakage from the appliance pump is normal. If the leakage increases contract the authorized customer service.
Transport instruction: Mind the balance of appliance during moving. Put the appliance a level ground.
Eco designed handle more comfortable to move the appliances (as Pic.D).

STORAGE

1. Place the appliance on level ground
2. Disconnect trigger gun and high-pressure hose
3. Disconnect high-pressure hose with outlet
4. Put the trigger gun into the trigger gun holder
5. Wind back power cord and high-pressure
6. Please store the machine properly especially during winter

TECHNICAL SPECIFICATION

SCHEMATIC DRAWING

References

• Trademark Industries Inc.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>