AQara DJT11LM Vibration Sensor User Guide
- June 5, 2024
- Aqara
Table of Contents
AQara DJT11LM Vibration Sensor
Product Introduction
Aqara Vibration Sensor is embedded with a high precision acceleration sensor and it detects the vibration and movement of objects. It communicates with the Hub via Zigbee protocol. It also works with other smart accessories to set various smart scenes, such as, local and remote alarm when it detects glass breaks.
- A hub is required.
- Aqara Hub is required to enable Aqara Vibration Sensor to work with HomeKit technology. See www.aqara.com for more details.
- This product is for indoor use only.
Quick Setup
- Please add the Hub to the app according to the Hub Quick Start Guide.
- Please open the app, tap “Home” and then tap “+” in the top right corner to enter the “Add Device (Accessory)” page. Select “Vibration Sensor”, and add it according to the instructions.
- If the connection fails, please move the accessory closer to the Hub and try again.
Installation
Effective Range Test: Single press the reset button on the accessory at your desired position. If the Hub makes voice prompts, it indicates that the accessory can communicate effectively with the Hub.
- Avoid metal surfaces to maximize signal strength.
Option 1: Place it directly in the desired position.
Option 2: Remove the protective film, and stick it to the desired
position.
- Keep the surface clean and dry.
Specifications
- Model: DJT11 LM
- Dimensions: 36 x 36 x9 mm (1.42 x 1.42 x 0.35 in.)
- Wireless Protocol: Zigbee
- Battery: CR2032
- Operating Temperature: -10°- +50° C
- Operating Humidity: 095% RH, no condensation
Online Customer Service:
www.aqara.com/support
Email: support@aqara.com
Manufacturer: Lumi United Technology Co., Ltd.
Address: th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave,
Taoyuan Residential District, Nanshan District, Shenzhen, China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>