HEAO 20211115 Rollator Walker with Seat for Seniors User Manual
- May 15, 2024
- HEAO
Table of Contents
HEAO 20211115 Rollator Walker with Seat for Seniors
Note:
Please read the instructions carefully before use
PART LIST
| Part Number | Diagram | Description | Qty |
|---|---|---|---|
| #A | Front Wheel | 2 | |
| #B | Front Frame with Seat | 1 | |
| #C |  | Rear Wheel with | ||
| Handle Brakes | 1 | ||
| #D | Carry Bag | 1 | |
| #E1 | Bolt | 2 | |
| #E2 | Washer | 2 | |
| #E3 | Nut | 2 | |
| #F | Buckle | 2 | |
| #G | Cane Holder | 1 | |
| #H1 | Pentagonal Nut | 2 | |
| #H2 | Bolt2 | 2 | |
| #I | Lock Pin | 2 | |
| #J | Cup Holder | 1 | |
| #K | Holder Strap | 1 |
HOW TO INSTALL?
-
Insert the Front Wheel (Part# A) to the front hole of the Front Frame with Seat (Part# B), then insert the Bolt (Part# E1), tighten with Washer (Part# E2) and Nut (Part# E3).
-
Connect the Rear wheel (Part #C) with the Front Frame (Part #B), and align the holes.
-
Insert the Bolt2 with Pentagonal Nut (Part #H ). Align the shock absorber holes with the frame, then insert the Lock Pin (Part #I).
-
Fasten the brake cable with Buckle (Part# F) , it will be fixed.
-
Insert the Cup Holder (Part# J) and Cane Holder (Part# G).
HOW TO FOLD?
Pull the seat cushion, simple to fold down(just one-hand folding).
HOW TO HAND BRAKE?
The handles include brakes, just pull up to help safety slow down or stop. Pull down lock rear wheel.
HANDLE HEIGHT
Move the handles up and down to your desired height by pressing the adjustment button.
Assembly Instructions Note
- Do not allow children to play with packaging without supervision.
- Keep the product away from children, for they may tip over and injure themselves.
- The walker should only be used for what has been developed and make sure that the walker works well before use. All screws should be tightened.
- Keep the product away from rain outside.
- Please do not hang any things on both handlebars, avoiding rollator walker stress not stable.
- Please pay attention to safety while installing, do not put fingers into the spin position and seat cushion card buckled position.
- Do not use strong corrosive action deaner onto product surface.
