PEREL CTH407 NON-PROGRAMMABLE THERMOSTAT User Manual

: June 5, 2024
: PEREL

Table of Contents

Introduction
Safety Instructions
General Guidelines
Overview
Installation
Operation
- Setting the Temperature
- Setting the Eco Mode
Cleaning and Maintenance
Technical Specifications
Documents / Resources

PEREL CTH407 NON-PROGRAMMABLE THERMOSTAT User Manual

Introduction

To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

Safety Instructions

| Read and understand this manual and all safety signs before using this appliance.
---|---
| Indoor use only.
| Class 2 appliance.
| Switch of micro-gap construction.
| Risk of electroshock when opening the cover. Be very careful during the installation: touching live wires can cause life-threatening electroshocks.

This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
Do not use outside the technical specifications.
Keep this manual for future reference.

Overview

Refer to the illustrations on page 2 of this manual.

Overview

on-off switch
working LED
program LED
SET knob
PROGRAM button

Installation

WARNING
Make sure to cut off the mains power supply before installing the thermostat.

Choose your installation spot. Install the thermostat in a wellventilated place and about 1.5 m (5 feet) above the floor, away from direct sunlight, heat and interference sources.
Remove the front cover using an appropriate screwdriver.
Mount the thermostat on a flat surface. Drill two 6 mm holes and insert a nylon anchor plug in each hole. Drill two 2.6 mm holes when mounting the thermostat on a wooden surface.
Wire the thermostat. The thermostat is designed for maximum 230 V~, 7 A. Never exceed these limits!
From left to right, the connection terminals are: neutral input (N in), live input (L in) and live output (L out). Use wires with diameter of 1.0-2.5 mm² and connect accordingly.
Replace the front cover and switch on the mains power supply.
The working LED [2] will turn blue to indicate proper connection.

Operation

Setting the Temperature

Slide the on-off switch [1] to the HEAT position. The thermostat will switch on and enter the temperature control status.
Turn the temperature SET knob [4] to the desired room temperature. The working LED [2] will light.
Slide the on-off switch to the OFF position to switch off the thermostat.

Note
Due to the built-in delay, the thermostat will not respond immediately when the temperature setting is changed.

Setting the Eco Mode

The eco mode is an energy-saving mode, which temperature is 5 °C lower than the set temperature. How to set the eco mode:

Press the PROGRAM knob [5] to activate the eco mode. The program LED [3] turns orange.
The thermostat returns to comfort mode six hours after setting the eco mode. The program LED [3] turns green.
At the same time next day, the eco mode is automatically activated.
Press the PROGRAM knob to cancel the eco mode. The program LED will switch off.

Cleaning and Maintenance

There are no user-serviceable parts inside the device. Refer to an authorized dealer for service and/or spare parts.
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents.

Technical Specifications

temperature range 5 °C – 30 °C
Tmax. 40 °C
control switch relay switch
rated power 230 V~, 50 Hz, 7(3) A
size 106 x 166 mm
weight 157 g

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our websitewww.velleman.eu. The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

Velleman® Service and Quality Warranty
Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries.
All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).

General Warranty Conditions Concerning Consumer Products (for EU):

All consumer products are subject to a 24- month warranty on production flaws and defective material as from the original date of purchase.
Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.
You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
Not covered by warranty:
- all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
- consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
- flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
- flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
- damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
- damage resulting from an inappropriate packing and shipping of the article;
- all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
Repairs occurring after warranty expiration are subject to shipping costs.
The above conditions are without prejudice to all commercial warranties.
The above enumeration is subject to modification according to the article (see article’s manual).

Made in PRC
Imported for PEREL by Velleman nv
Legen Heirweg 33, 9890 Gavere, Belgium
www.perel.eu

Logo

Documents / Resources

| PEREL CTH407 NON-PROGRAMMABLE THERMOSTAT [pdf] User Manual
CTH407 NON-PROGRAMMABLE THERMOSTAT, NON-PROGRAMMABLE THERMOSTAT, THERMOSTAT
---|---
| PEREL CTH407 Non-Programmable Thermostat [pdf] User Manual
CTH407 Non-Programmable Thermostat, CTH407, Non-Programmable Thermostat, Thermostat