PEREL SMART1211 Smart WiFi Filament Bulb User Manual
- June 5, 2024
- PEREL
Table of Contents
USER MANUAL
smart wifi filament bulb
warm white & intense warm white
SMART1211
QUICK START GUIDE
Introduction
This device should be returned to your distributor or to a local recycling service. If in doubt, contact your local waste disposal authorities.
Safety Instructions
Read and understand this manual and all safety signs before using this appliance.
Non-dimmable light source.
Not suitable for use in moisture.
- Please refer to the full-length manual on www.velleman.eu.
- This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
- Do not disassemble the appliance. There are no user-serviceable parts.
- Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
- Do not immerse the appliance.
- For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.
General Guidelines
- Refer to the Velleman® Service and Quality Warranty on www.velleman.eu.
- All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
- Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
- Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
- Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary, incidental or indirect) of any nature (financial, physical…) arising from the possession, use or failure of this product.
- Keep this manual for future reference.
Operation
1. Download the Tuya app.
2. Connect your smart device to a 2.4 GHz network. Launch the app and follow
the first-time setup instructions.
3. Insert the light bulb in an appropriate socket.
Place the light bulb in discovery mode. Wait 2 seconds, then just switch it
off and on repeatedly with a 2-second interval. This will get it into pairing
mode.
4. The light bulb should now flash rapidly to indicate that the discovery
mode is activated.
5. Click + to add a device.
6. Go to All Devices > Lighting and enter your wi-fi password. The app should
display the light bulb.
7. Edit the light name, e.g. Main Light and select the room in which the
light is located.
8. Control the light, setup events and timers via the Tuya app. For full
functionality, please refer to the Me tab.
Care and Maintenance
- Always screw the lamp out of its socket before cleaning.
- Wipe clean with a soft cloth dampened with a soap and water solution. Dry carefully before screwing back in the socket.
Technical Specifications
electrical data
LED module …………………………….. filament LED
total nominal power ……………………………… 6.5 W
stand-by power ………………………………… < 0.5 W
power factor ……………………………………… > 0.5
energy consumption …………………. 6.5 kWh/1000 h
dimmable ……………………………… no, only via app
power supply ………………….. 220-240 V~, 50/60 Hz
light technical data
colour ……………….. intense warm white/warm white
colour temperature ……………………….. 2200-2700 K
SDCM ………………………………………………. –
beam angle …………………………………………360°
frequency range ……………………….. 2412-2484 MHz
current ………………………………………….. 0.04 A
RF power ………………………………….max. 15 dBm
luminous intensity ………………………………… – cd
luminous flux ……………………………………555 lm
colour rendering index ……………………………. > 80
starting time ……………………………………. < 0.5 s
warm-up time (60 %)…………………………….. < 1 s
lifespan
nominal lifetime ………………………………. 15.000 h
number of switching cycles ……………………… 15.000
type ………………………………………………… ST64
fitting ……………………………………………….. E27
dimensions …………………………….. Ø 64 x 140 mm
weight ………………………………………………..- g
RED Declaration of Conformity
Hereby, Velleman Group nv declares that the radio equipment type SMART1211 is
in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.velleman.eu.
Use this device with original accessories only.
Velleman Group nv cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info on this product
and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is
subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Group nv. All worldwide
rights reserved. No part of this manual may be copied, reproduced, translated
or reduced to any electronic medium or otherwise without the prior written
consent of the copyright holder.
Imported for Perel by Velleman Group nv
Legen Heirweg 33, 9890 Gavere, Belgium
www.velleman.eu
V02
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>