velleman VDLLPLx1 EHQ POWER User Manual
- June 5, 2024
- Velleman
Table of Contents
VDLLPLx1
USER MANUAL
Introduction
To all residents of the European Union Important environmental
information about this product
This symbol on the device or the package indicates that disposal of the device
after its lifecycle could harm the environment. Do not dispose of the unit (or
batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling. This device should be returned to your distributor or
to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing HQPower™! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, don’t
install or use it and contact your dealer.
Safety Instructions
| Keep this device away from children and unauthorized users.
---|---
| Indoor use only. Keep this device away from rain, moisture, splashing, and
dripping liquids. Never put objects
filled with liquids on top of or close to the device.
| DO NOT disassemble or open the cover under any circumstances. Touching live
wires can cause life-threatening electroshocks. Protect the power supply unit
against damage. Warning! If the power supply unit is damaged, it must be
replaced by the manufacturer, its service agent, or similarly qualified
persons in order to avoid any hazard.
| Always disconnect mains power when the device is not in use or when
servicing or maintenance activities are performed. Handle the power cord by
the plug only.
| Do not stare directly at the light source, as this may cause
• epileptic seizure in sensitive people
• temporarily loss of sight (flash blindness)
• permanent (irreversible) eye damage.
| This is a safety class III device.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
| Keep this device away from dust and extreme temperatures. Do not use the
device with ambient temperatures higher than 35 °C. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at
least 1″ (± 2.5 cm) in front of the openings.
---|---
| Protect this device from shocks and abuse. Avoid brute force when operating
the device.
- Familiarise yourself with the functions of the device before actually using it.
- All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
- Only use the device for its intended purpose. Using the device in an unauthorized way will void the warranty.
- Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
- Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device against damage by leaving it switched off until it has reached room temperature.
- Keep this manual for future reference.
Features
- 9 segments of 12 LEDs each
- very low power consumption
Overview
Refer to the illustration on page 2 of this manual.
1 | colored dome |
---|---|
2 | power input |
3 | speed adjustment |
4 | mounting bracket |
Installation
Safety
- Before mounting the product, read and follow the safety recommendations indicated in the Safety Instructions.
- The carrying construction must be able to support 10 times the weight of the device for 1 hour without deforming.
- Never stand directly below the device when it is being mounted, removed, or serviced. Have a qualified technician check the device once a year and once before you bring it into service.
- Install the device in a location with few passers-by that is inaccessible to unauthorized persons.
- Make sure there is no flammable material within a 0.5 m radius of the device.
Operation
Do not use the device when damage to housing or cables is noticed. Do not attempt to service the device yourself but contact an authorized dealer.
- Insert the plug of the included power supply into the power input [2] located on the base of the warning light. The warning light will switch on automatically.
- Adjust the rotation speed with the speed adjustment knob [3]. Turn left to decrease or right to increase.
- Disconnect the power source after use.
Cleaning and Maintenance
Before starting any cleaning or maintenance activities:
- Disconnect from the power source.
- Let the device cool down.
Cleaning
- Clean the warning light with a soft cloth.
- Always be sure to dry all parts completely before plugging the unit back in.
- Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue, dust, dew).
- Do not immerse the device in any liquid.
Maintenance
- All screws should be tightened and free of corrosion.
- The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting supports, do not change the location of the connections…
- There are no user-serviceable parts.
- Refer to an authorized dealer for service and/or spare parts.
Technical Specifications
colour | blue (VDLLPLB1) |
---|
orange (VDLLPLO1)
red (VDLLPLR1)
power supply| 14 VDC, 300 mA (PSU incl.)
LEDs| 108 pcs
dimensions| Ø 143 x 182 mm
weight| 0.42 kg
Use this device with original accessories only. Velleman Group nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Group NV. All worldwide
rights reserved. No part of this manual may be copied, reproduced, translated
or reduced to any electronic medium or otherwise without the prior written
consent of the copyright holder.
Velleman® Service and Quality Warranty
Since its foundation in 1972, Velleman® acquired extensive experience in the
electronics world and currently distributes its products in over 85 countries.
All our products fulfill strict quality requirements and legal stipulations in
the EU. In order to ensure the quality, our products regularly go through an
extra quality check, both by an internal quality department and by specialized
external organizations. If, all precautionary measures notwithstanding,
problems should occur, please make an appeal to our warranty (see guarantee
conditions).
General Warranty Conditions Concerning Consumer Products (for EU):
-
All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
-
Velleman® can decide to replace an article with an equivalent article or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
-
Not covered by warranty: – all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
– consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
– flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
– flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
– damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally); – damage resulting from an inappropriate packing and shipping of the article;
– all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®. -
Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
-
Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair.
Note that returning a nondefective article can also involve handling costs. -
Repairs occurring after warranty expiration are subject to shipping costs.
-
The above conditions are without prejudice to all commercial warranties. The above enumeration is subject to modification according to the article (see article’s manual).
Made in PRC
Imported by Velleman Group nv
Legen Heirweg 33, 9890 Gavere, Belguim
www.velleman.eu
References
- Details – Own brands – Velleman – Wholesaler and developer of electronics
- Velleman – Wholesaler and developer of electronics
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>