Choetech V16 Magnetic Wireless Charger User Manual
- June 13, 2024
- CHOETECH
Table of Contents
Choetech V16 Magnetic Wireless Charger
Preface
Thank you for purchasing our company’s wireless charger product. This product is a desktop wireless charger that allows you to easily experience the fun of wireless charging. Before using this product, please read the instruction manual carefully and keep it properly for future references.
Product List
Wireless charger x1
User manual x1
Type-C to USB x1
Precautions
For fast and safe charging, it is recommended to use a QC3.0 or PD charger, other adapters may not be suitable for this device, which may cause unstable charging or abnormal flickering.
Product Specifications
| Name | Magnetic Wireless Charger |
|---|---|
| Model | V1i |
| Output | 15W/1OW/7.5W/5W(Max) |
| Input voltage | 5V/2A, 9V/2A(QC3.0 or PD protocol) |
| Output voltage | 5-9V |
| Output current | Max-1100mA |
| Charging method | Electromagnetic induction |
| Input itort | Type-C |
| 10W max | 82% |
| Charging distance | 0-4mm |
| Working frequency | 113kHz-205kHz |
Working status LED indicator
Connect to power
Standby mode
Failure
The indicator light flashes quickly
Installation
Attentions
- Do not pull the power cord forcibly to prevent the power cord from breaking or falling off.
- Do not use a phone case with a metal back or a phone case with a thickness greater than 4mm.
- Do not put metal objects or magnetic cards on the charging board, it may cause the metal to become hot, the magnetic card is damaged, the charger is damaged or other abnormalities.
- The receiving coil of the mobile phone that supports wireless charging is generally located at the center of the mobile phone. Please place the centre of the mobile phone in the centre of the charging board for better charging experience.
- If the receiving coil or the transmitting board are overheated during use and stop charging, please remove the charging device, wait for it to cool down, and try charging again.
- The standard temperature of wireless charger QI is 130°F, but our product temperature is controlled within 130°F. The charger will cut off the current when it is abnormally hot. Please contact us if any damage occurs.t
Thank you for choosing us!
Customers Support
JOIN OUR VIP CLUB NOW!
SCAN ME WITH YOUR PHONE’S CAMERA APP
NOT HAPPY WITH YOUR PRODUCT?
WE’LL MAKE IT RIGHT!
JUST EMAIL US AT support@oandys.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>