RHYTHM Electronics RM-KPL011 USB Adaptor for Car User Manual
- June 5, 2024
- Rhythm Electronics
Table of Contents
RHYTHM Electronics RM-KPL011
USB Adaptor for Car
User Manual
Product function introduction
Wireless transmission brings a more convenient connection experience and greatly enhances the owner’s experience of using CarPlay.
Product Specification Parameters
Power input: 5V 1-2.1A
Product Power: 0.15W
Output Resolution:Adaptive
Compatible car models and iPhone devices
Search for the compatible models:
https://www.apple.com/ios/carplay/available_models
Support iPhone 6 and later models, software version iOS 10 or above.
Product Connection
If the factory car supports a CarPlay connection via USB cable, please plug
the product into the USB port in the car. Such USB ports may be marked with a
CarPlay car icon or smartphone icon. Select the CarPlay function in the care
system, it will enter the following interface
Make sure your iPhone’s Bluetooth and Wi-Fi features are turned on and no
other in-car devices are connected. On your i Phone, go to “Settings” >
“Bluetooth”, in the Other Devices list, you will see a Bluetooth device name
starting with CarPlayBox, tap to pair, allow permissions, and tap Use CarPlay
to Connect wirelessly.
Version update description
After connecting to wireless CarPlay, scan this QR code with your camera, or
enter 192.168.2.1 in the safari to enter the following interface
Note: You need an iphone and open the mobile data function to access the
browser
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: – – Reorient or relocate the receiving antenna. – –
Increase the separation between the equipment and receiver. – – Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. – – Consult the dealer or an experienced radio/TV
technician for help. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and(2) this device must accept any interference
received, including interference that may cause undesired operation. The
device has been evaluat ed to meet general RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>