PEREL VTBAL600 Digital Crane Scale User Manual

June 5, 2024
PEREL

PEREL VTBAL600 Digital Crane Scale

Introduction

PEREL VTBAL600 Digital Crane Scale FIG
4

To all residents of the European Union
Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

Safety Instructions

Read and understand this manual and all safety signs before using this appliance.

  • This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
  • Protect this device from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
  • Do not remove the cover under any conditions. There are no user-serviceable parts inside. Never operate this device when its cover is removed.
  • Familiarise yourself with the functions of the device before actually using it.

General Guidelines

  • Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
  • All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
  • Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
  • Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
  • Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary, incidental or indirect) – of any nature (financial, physical…) arising from the possession, use or failure of this product.
  • Keep this manual for future reference.

Batteries

WARNING
Do not puncture batteries or throw them in fire as they may explode. Do not attempt to recharge non-rechargeable batteries. Dispose of batteries in accordance with local regulations. Keep batteries away from children.

  • Open the battery compartment and insert the batteries according to the correct polarity.
  • Replace the batteries as soon as the display turns dark.
  • Remove the batteries after use.

Overview

Refer to the illustrations on page 2 of this manual.

  1. on-off/tare
  2. unit
  3. hold

Operation

General Operation

  1. Hold the scale in your hand or hang it on a solid truss.
  2. Switch on the scale. The scale is ready-to-use when the display shows 0.
  3. Hang the item to be weighed on the hook and wait for the display to stabilize
  4. To tare an item, tap the tare button. Place the item to be weighed on the scale.
  5. The weight is displayed.

Unit Conversion
Press the unit button until the desired weighing unit is displayed.

Hold Function

Press the hold button repeatedly to select the desired hold function:

  • auto hold
    The weight is locked when stabilized.

  • peak hold
    The highest weight is locked. Good for measuring forces.

  • no hold
    The weight does not lock.

Calibration

  1. With the scale off, press and hold the unit and on-off buttons simultaneously until a number appears in the display.
  2. Hold the on-off button pressed to reset the value to 100.0 kg.
  3. Hang the required calibration weight on the hook. Wait for the value to stabilize and press the on-off button. Calibration is complete when PASS appears on the display.

Error Indications

  • Battery power running low.
  • Overloaded. Remove excess weight.
  • Calibration needed.

Cleaning and Maintenance

  • Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents.
  • Do not immerse the device in any liquid.

Technical Specifications

  • power supply.
    2 x 1.5 V AAA batteries (incl.)

  • material
    ABS + stainless steel

  • capacity
    200 kg/441 lb.

  • graduation
    200 g/7.05 oz.

  • units

  • kg/lb./oz.

  • dimensions
    350 x 70 x 70 mm

  • display .
    36 x 14 mm

  • weight
    520 g

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.perel.eu. The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals