MORRIS MAC-16252 Tower Fan 3 in 1 Instruction Manual

MORRIS MAC-16252 Tower Fan 3 in 1

IMPORTANT SAFETY INSTRUCTIONS

Caution

Read Rules for Safe Operation and Instructions Carefully.

WARNING

1. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person in order to avoid a hazard.
2. Household and indoor use only.
3. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
4. Unplug the appliance during filling and cleaning.
5. Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.
6. Non-specialized personnel or unauthorized repair personnel shall not repair or modify the machine.
7. It is forbidden to operate with wet hands to avoid electric shock.
8. If the unit is not in use for a long time, unplug the power cord.
9. To prevent accidental injury or damage to the unit, please do not insert any foreign matter into the air inlet and outlet, because the unit incorporates a high-speed wind rotor.
10. It is prohibited to use this unit in environments with flammable and explosive gases and direct sunlight for a long period shall be avoided.
11. Do not place this unit in an inclined or another uneven place to prevent the unit from falling and causing damage to the unit or internal parts.
12. This machine has a safety switch. If the honeycomb filter support has not been installed well, the unit will not work as usual; when the machine is working, do not remove the honeycomb filter frame.
13. At any time the water level in the tank shall not exceed the “MAX” (maximum) scale, and during humidification, the total water level in the tank shall be controlled, and shall not be below the “MIN” (minimum) scale.
14. After the water tank is filled with water, do not tilt or collide with the unit when placing or moving it. To move the unit body, please drive it slowly from the side to prevent water overflow.
15. In using the unit, prohibit overturning to avoid any accident. If the unit topples over accidentally, and it contains water, unplug the power cord immediately and take it to the repair store.
16. Do not place items on the unit, and covering the outlet is strictly prohibited.
17. To clean the unit’s appearance, apply a damp cloth (or add a little cleaning agent) to wipe, and never use a corrosive cleaning agent or solvent for cleaning. Never rinse the unit with water.
18. Do not keep the air inlet and outlet of the unit close to walls, curtains, and other objects, or they may block the airflow and affect the air supply.
19. When the unit is running, do not knock at or shock the unit body forcibly or it may lead to an automatic shutdown, in which case simply restart the unit..
20. In summer, the water in the tank may easily deteriorate and generate odor, please pay attention to regular change of water; if the indoor temperature is below zero in winter humidification, it is best to use warm water for humidification.
21. Do not place the unit directly below the power outlet.
22. Do not use the unit around the tub, sprinkler, or swimming pool.
23. Product repair must be carried out by a designated agency.
24. To protect against the risk of electrical shock, do not immerse the unit, cord, or plug in water or other liquid.
25. Use a soft cloth moistened with mild soap, and then use a dry cloth to wipe it again.
26. Correct Disposal of this product This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. The packaging material is recyclable. Dispose of the packaging in an environmentally friendly manner and make it available for the recyclable material collection service.
27. Do not permit the area around the humidifier to become damp or wet. If dampness occurs, turn the output of the humidifier down. If the humidifier output volume cannot be turned down, use the humidifier intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp. Unplug the appliance during filling and cleaning. Never leave water in the reservoir when the appliance is not in use. Empty and clean the humidifier before storage. Clean the humidifier before the next use.

RULES FOR SAFE OPERATION

1. Never insert fingers, pencils, or any other object through the grille when a fan is running.
2. Disconnect the fan when moving from one location to another.
3. Be sure the fan is on a stable surface when operating to avoid overturning.
4. DO NOT use a fan in the window, rain may create an electrical hazard.
5. Household use only.

PRODUCT INTRODUCTION

Notice
Pictures in the manual are for reference only, and real objects within the packaging box will prevail in the end.

Parts name

INSTALLATION INSTRUCTIONS

1. Take the two parts of the base out of the box, align the centers of the two bases and place them crosswise, then rotate one of the bases to align the holes and snap them together.
2. Align the fuselage clip line with the base clip line and press the fuselage into the base, you can fix it with screws at the mark to the base.

INSTRUCTIONS

Guidance on feeding water and disassembling & washing the water tank

Notice

• Please clean up water accumulated at the bottom of the water tank in a timely manner when the product is left unused.
• Please remove the power plug when feeding water and cleaning.
• Please make sure that the water pump module is fixed in position before startup. Random displacement of the water pump module can cause the abnormalities of the product in cool wind function.
• Two ways for feeding water:

1. Pull out half of the water tank and feed water directly without disassembling the water pump module.
2.  Separate the water pump module, and fully pull out the water tank, to feed water or clean the water tank.

Guidance on feeding water and disassembling & washing the water tank

1. Pull the water tank buckle to the horizontal state.
2. Pull out the water tank completely, place it in a stable place, add water and push the water tank into the fuselage.
3. Unscrew the rotary knob in the “—” shape manually (90° anticlockwise) to separate the water tank from the water pump module (including the water pipe).
4. Pull out the tank completely to clean and add water.
5. Position of clean water pump shown. It is recommended to clean every 3 months to extend the service life.
6. After feeding water or cleaning the water tank, install the water pump module in the water tank. Insert the front hook into the slot of the water tank, and then rotate the rotary knob in the “—” shape clockwise for 90°, and close it as shown in the figure.
7. Push the water tank inside slowly, and stir the water tank buckle to lock it up.

Usage of the ice crystal box

Notice

1. The ice crystal box can be frozen repeatedly and recycled; You can also choose not to use it based on the temperature.
2. Please keep the ice crystal box closed to prevent damage and liquid leakage.
3. The ice crystal box is made of eco-friendly and toxic-free materials and can be refrigerated in the fridge safely.
4. When using the frozen ice crystal box in the water tank, the temperature at the air outlet will drop after operating the cool wind function.
5. Ice blocks can be used to replace the frozen ice crystal box, to exert the same cooling effect.
6. Control the water level of the water tank to be lower than the “max” (maximum) indicating scale when feeding water, and if the water level is lower than the “min” (minimum) indicating scale, please feed water in time.

Pull out the water tank completely and place it in a stable place.

Take the ice crystal box out of the package and place it inside a refrigerator to freeze for more than 3 hours. Put the frozen ice crystal box in the water tank, and feed water below “max” (maximum) indicating scale.

**Operating instructions of the machine body

**

Remote control button description

Notice

• The remote control should be normally used within 5 meters of the front of the product and 30 degrees of the deviation angle.
• The battery contains many heavy metals, acids, bases, etc., which may threaten human health; Waste batteries should be recycled separately.

Note:
Both machine body operations” are buttons of cool wind. and remote control ”

CLEANING AND MAINTENANCE

Notice

• Disconnect the power before cleaning the product. Clean after the product is shut down for two minutes.
• Prevent from using any abrasive tools and solvents that may damage the surface to clean up the product. Detergent can be used in the cleaning, and then wiped clean with a dried cloth in time.
• Prevent from washing the machine body with water directly, and wash disassemble parts (wet curtain parts) with a soft brush and then install them after they are cleaned and dried.
• It is not allowed to take the product apart for any modification. It is recommended that this product should be checked and cleaned regularly in order to extend its service life.

Replace water

After stopping the cool wind function for 2 minutes, it’s applicable to pull out the water tank to replace water, as water in the pipeline and wet curtain flows back to the water tank.

SERVICE GUIDE

Troubleshooting

Please check the following points before asking others for inspection or maintenance.

fails to be plugged in or has bad contacts.

The machine switch fails to be opened.

Abnormalities of cool wind function.| Check whether the water tank lacks water.

MAINTENANCE INSTRUCTION

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is needed.

1. Before cleaning and assembling, a fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface. Do not use any of the following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid into the motor housing or interior parts.

CLEANING

1. Make sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moistened with mild soap. Thoroughly remove soap film with a dry cloth.

NOTICE ABOUT RECYCLING

Your product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical and electronic equipment, at their end of life, should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/ recycling center. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in!

DECLARATION OF CONFORMITY

• Herewith, KALLIOPI KARIDA & CO., LP states that this product, complies with the requirements of below directives:

• EMC-Directive: 14 / 30 / EU

• Low Voltage Directive: 14 / 35 / EU

• CE Marking: 93 / 68 / EEC

• RoHS Directive: 11 / 65 / EU & 15 / 863 / EU

• The detailed declaration of conformity can be found at:
  www.morris.gr

• Exclusive importer in Greece:

• KALLIOPI KARIDA & CO., LP

• 87A, 17th Noemvriou str, P.C. 55535

• Thessaloniki – Greece

• T: +302316006600 | F: +302316006650
  www.morris.gr

References

• Home - Morris

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>