MClimate MC-LW-BTN-01 Multipurpose Button LoRaWAN User Manual
- June 5, 2024
- MClimate
Table of Contents
MClimate Multipurpose Button LoRaWAN®
User manual
Scan the QR Code to access MClimate Multipurpose Button LoRaWAN® extended documentation
Need some help?
For more product information and issues related to it, visit climate.eu /lorawan-resources or write us to: lorawan-support@mclimate.eu
** 00359 800 3 1010
Monday-Friday 09:00 – 18:00
Sofia, Bulgaria**
Aleksandar Malinov Boulevard 31, Campus X, Building 2, floor 1, office 1-2
What’s inside the box?
MClimate Multipurpose Button LoRaWAN®
Technical specifications
Description: LoRaWAN Button with temperature sensor and 3 types of button
presses (single, double, and triple press) Created by MClimate™
Model: MC-LW-BTN-01
Dimensions: 71 x 41 x 18mm
Weight: 26gr
Frequency range: 863÷870MHz
Power supply : 1xER10280 3VDC
battery Sensors: built-in temperature sensor
Work temperature: 0°С to +50°С
Material: ABS
Environmental conditions, in which the device is intended to operate:
– Indoor using;
– for altitude up to 2000m;
– for an ambient temperature:0°С to +50°С;
– for a maximum relative humidity of 80% for temperatures up to 31°С,
decreasing linearly to 25% relative humidity at temperature 50°С;
– for the environment with a degree of contamination 2 (PD2).
Storage and transportation conditions:
– for an ambient temperature :-40°С to +85°С;
– for relative humidity 5% to 90% without condensation
Manufacturer
Melissa Climate Jsc
Gen. Gurko 4 street
1000 Sofia, Bulgaria
Compliance with the WEEE Directive
The appliance marked with this symbol should not be disposed of with other
household waste. It must be handed over to the relevant collection point for
the recycling of electrical and electronic equipment.
Safety Instructions
Please read the safety instructions before installing the device! Failure to follow the recommended instructions in this manual may be dangerous or in violation of the law. The manufacturer Melissa Climate Jsc., is not responsible for any loss or damage caused by failure to follow the instructions in the operating manual.
Legal Notices
All information, including but not limited to, features, functionality, and/or
other product specifications are subject to change without notice. climate
retains all rights to review or update its products, software, or
documentation without being required to notify any natural or legal person.
The climate and MClimate logo are trademarks of Melissa Climate Jsc. All other
brands and product names mentioned herein are trademarks of their respective
owners.
EU Declaration of Conformity
This device complies with the essential requirements and other applicable
provisions of the following EU directives:
2014/53/ЕС
EN 50491-3:2009
EEU 300 220-1 V3.1.1:2017
EEU 300 220-2 V3.1.1:2017
EN 60950-1:2006+A11:2009 +A1:2010+A12:2011+
А2:2013 + AC:2015
EN 301 489-1 V2.1.1:2017
Compatibility
In order to operate MClimate Multipurpose Button LoRaWAN®, you will need:
the LoRaWAN® network
Battery
Battery type: 1xER10280, 3VDC Device operating voltage: 2.7 – 3VDC
Device parts
| 
---|---
Assembled MClimate Multipurpose Button LoRaWAN®, top view| Disassembled
MClimate Multipurpose Button LoRaWAN®, bottom view
LED, Buttons, and behavior
There are three separate types of clicks supported by the button.
After each click, the button waits for 600ms to check if another click is
coming. Once the click type has been determined, the device sends a confirmed
uplink with the temperature data and the click type information. Supported
click types:
LEDs indications:
- The GREEN LED is activated while the button is pressed
- The side LEDs alternate when the LoRaWAN message is being sent
- The GREEN LED lights up when the event is sent and acknowledged by the gateway and LNS
- If the message has not been successfully acknowledged, the RED LED activates
- If a message is not allowed to be sent at the moment (due to RF duty-cycle restrictions), the RED light activates after you release the button.
- If the sensor is NOT connected to a network, then the SIDE and RED LEDs activate.
Commissioning
- Open your LoRaWAN® Network provider access panel and add the device using the supplied Serial Number, DevEUI, AppEUI (JoinEUI), and AppKey.
**** The data is an example. Do not use. - Continue the Installation with the instructions of your LoRaWAN® Network provider.
You can get DevEUI, AppEUI (JoinEUI) & AppKey information from the LoRaWAN® credentials .csv file we sent you with the fulfillment confirmation.
Remove the battery paper isolator from the device.
Open the device
If you need to open the device to replace the battery, use the slot indicated
in the picture to open the device. Insert the new battery following the
direction indicated on the PCB.
Disassembled MClimate Multipurpose Button LoRaWAN®, top view
Installation
We recommend installing the device in an open environment (e.g. not in a recess) at 1.5m height. Do not install the device near big metal items as it will worsen the RF performance. Use double-sided tape to attach it to the surface.
Capter – Transmett re – Analyser
Interlaces pour Pint ouroupue industrielle
Remy GUEDOT
Gsm: +33 (0) 662 80 65 57 guedot@rg2i.fr
Olivier BENAS Gsm: +33 (0) 666 84 26 26 olivier.benas
ATTENTION HOUVIllf ADILESSI
14 rue Edouard Petit – F42000 Saint Etienne
Tel: +33 (0) 477 92 03 56 – Fax: +33 (0) 477 92 03 57
www.erg2i.fr
www.mclimate.eu
Designed & Manufactured by MClimate in Europe.
last update: 20.01.2022