aukung CDB-022B Portable Basketball Hoops and Goals User Manual
- October 30, 2023
- aukung
Table of Contents
CDB-022B Portable Basketball
Hoops and Goals
User Manual
Thank you for purchasing the Portable Basketball Hoops & Goals. Please read this user manual carefully and keep it in a safe place for future reference.
Product Specifications
| Model | CDB-022B |
|---|---|
| Name | Portable Basketball Hoops & Goals |
| Backboard material | PC, Transparent backboard |
| Backboard size | 107x70x3cm |
| Hoop diameter | 45cm (inner) |
| Lifting height | 2.0-3.05m |
| Hoop material | Iron |
| Base size | 111×70.5×14.5cm |
| Counterweight (Maximum carrying capacity) | 80KG water or 100KG sand |
| Package dimensions | 115x80x20cm |
| Height | 365cm (Max) |
| Width | 111cm |
Important Safety Precautions
Notice:
-
Please read all instructions before attempting to install or assemble this item. Assembly should be done by adults only.
-
Firmly secure all screws before use.
-
Reconfirm that all bolt, screws, and knobs are secure every 90 days.
-
The product is intended for outdoor use.
-
If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or factory replacement parts are installed.
-
Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the product warranty.
-
Do not hang from the rim or climb on the pole. Do not climb on the base or structure in general, as this could result in serious injuries.
-
Adjustment and moving of the basketball set must be carried out by adults.
-
Always check the unit to ensure the base is full of water or sand, and that all fittings and hardware are tight before each use.
-
Always place the base of the set on a flat surface.
-
Do not allow water to freeze in the base.
-
The set requires two people for assembly.
-
Check the base regularly for any leakage before playing.
Basketball Maintenance -
Please check the degree of corrosion and firmness of the connection and welding parts twice a year. When abnormalities such as looseness and rust are found, repair and anticorrosive treatment should be performed in time.
-
The surface of the ball rack should be cleaned with a neutral detergent to avoid damaging the surface of the ball rack plastic powder.
Moving System
Product Design
PRODUCT ASSEMBLY
STEP1
Insert Axles (#1A) into the Wheels (#10) as shown. Next press wheels into the
Base (#11). Place the Lower pole (#6) into the top side of the Base (#11) and
place into position in the base and slide Axle (#1B) through holes on the
bottom of the base.
STEP2
Firstly, fix the Lower Left and Right Braces (#2) with bolts, nuts and washers
(#D) to the bottom of the base. Next lock the Lower Left and Right Braces (#2)
to the Lower Pole (#6) with Bolt, Nut and Washer (#B2).
STEP3
a: Insert the Middle Pole (#5) into the Lower Pole (#6).
b: Fix the Lower Pole (#6) and the Middle Pole (#5) with the Tension Knob (C).
Note: Lower Pole position (#6) with Tension Knob (C) toward the back.
STEP 4
Attach Net (#9) to Rim (#7).
Slip the wire into both sides of the hook and into the hook from below.
STEP 5
Lock the Top Pole Braces (#3) to the Backboard (#8) with Bolts, Nuts and
Washers (#A2), and then tighten them.
STEP 6
Lock the Rim (#7) to the Backboard with 4 sets of Bolts, Nuts & Washers (#A1)
as shown.
Fix the Top Pole (#4) to the Top Pole Braces (#3) with 2 sets of Bolts, Nuts & Washers (#B1).
8 STEP
Insert the Top Pole (#4) into Middle Pole (#5). Secure using the Tension Knob
(#C).
STEP 9
REMINDER
Please tighten all the nuts & Telescopic Knobs. Add sand or water to the base
to make the basketball equipment stable.
Troubleshooting
| Problem | Cause | Solution |
|---|---|---|
| Parts are hard to put together. | 1.Incorrect installation. | |
| 2.Missing parts. | Please follow the steps in the installing video provided. | |
| Knob is hard to be turned. | Incorrect knob installation. | Please re-install |
this part of the product as we’ve already ameliorate the knob.
Difficult to move the product even with the moving wheel.| Incorrect moving
method.| To better move the product, please tilt the base more than 40 degrees
to the ground.
The rebound feels wobbly, not stable at all.| 1.Loose connection of the knob
on top.
2.Not enough support from the base.| 1.Please tighten the knob on top of the
rebound.
2.Put water or sandbags at the base to weigh it down.
Missing parts.| 1.Lost during transportation.
2.Lost during installation.| Contact us and we’ll reship the parts to you.
Wobbly base.| Not enough water/sand added to the bottom.| Add more weighs to
the bottom.
Product Highlights
- Improved height adjustment, giving you the freedom to choose the height of the basketball rack.
- Added front wheels for easy movement.
- Durable, equipped with a 44-inch durable polycarbonate backboard, a bumper, an all-weather net, and sturdy heavy-duty steel poles
- Safe and convenient to use.
Customer Support
If you need help regarding product issues, after-sales service, or other
relevant problems, please contact us via the the amazon order number.
Please have the following information ready when requesting for service:
Problem Description
*Note: Products purchased directly from benefit from our after-sales
service. If the purchases are made from other selling teams, we recommend you
contact them for warranty issues.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>