DRACAST DRBRP3500D LED Studio Light User Guide
- June 5, 2024
- DRACAST
Table of Contents
DRACAST DRBRP3500D LED Studio Light
Product Information
Dracast Boltray Series is a high-output, compact light fixture that combines
accurate color rendition with portable design. The result is a light fixture
that is perfectly suited for photo and filmmaking applications. The 3500 model
is equipped with a 350W LED COB array in single color 5600K
The Dracast Boltray Series is constructed with an aluminum alloy frame, making
the fixture both durable and lightweight. The lamp head is separated from the
power and control assembly giving the lamp head maximum versatility. The
fixture can be powered via AC mains power, or via DC battery power through its
onboard v-mount battery plates. The fixture is equipped with overheating
protection as well as onboard fans for prolonged use. Boltray fixtures are
equipped with a built-in 2.4G wireless receiver enabling it to be controlled
via remote.
Specifications
| Model | DRBRP3500D |
|---|---|
| Output Power | 350W |
| Color rendering index | ≥95 |
| Luminous Flux | 31500LM |
| LED Quantity | 1 PCS |
| Color Temperature | 5600K ± 200K |
| Illuminant | High-Power LED Module |
| Adjusting Range | 10%-100% |
| Remote Control | (99channel 2.4G wireless remote control) |
| Remote Control distance | ≥50M |
| Lithium Battery Type | Sony type V lock battery x 2 pcs, the output power of |
single battery ≥180 Watts
DMX512 dimmer| YES (RJ45 interface)
power input| AC100-240V 50/60Hz
Overheating Protection:
A thermally triggered overheat protection system will automatically
shutdown the fixture if internal temperure exceeds 90°C (194°F). The fixture
will emit an audible warning prior to shutdown. Normal operation may resume
upon completed cooldown.
Boltray Figure and Components
① COB LED
② Bowens mounting
③ Angle adjusting knob
④ Power socket
⑤ Yoke
⑥ Handle
⑦ Silent fan
The fan will be on all the time as the light is on
⑧ Angle adjusting knob
⑨ DMX socket
⑩ connection line socket
⑪ Power cord socket
⑫ Power switch
ll: AC ll: DC
⑬ Sony type V lock battery
⑭ Channel keys
⑮ DMX switch
⑯ FUN Button – 5 modes switch
F1- Paparazzi F2- Firework F3- Warning
F4 – Thunder F5 – TV
Shortly press the FUN button to enter into F1-F5 modes of special effect.
Switch sequentially from F1 to F5 by pressing the button. Wheel the dimmer to
change the brightness intensity from 10% to 100%.
Pressing the dimmer then, and wheel to change the special effect from weak
to strong (1 ‒ 10 ).
⑰ LED display
⑱Adjustment knob
Warning and Notes
- Please do not expose the device to excess heat or moisture. Store in a cool, dry place.
- Please do not let the device be exposed to rain or other liquids to avoid permanent damage.
- Please do not connect the fixture to excess or incorrect voltage.
- The body will generate heat when operating. Use caution when handling.
- During transportation and installation, do not hit the fixture against other items or drop the fixture. This can cause damage to the light.
- Please do not directly look at the LED light when the fixture is powered on.
- Please do not place the fixture near any flammable materials or solvents.
- Please use a dry, soft cloth to clean fixture. The fixture may be cleaned with damp cloth only when the unit is powered off and unplugged. Dry the fixture with a soft cloth before plugging back in.
- Keep the fixture out of reach of children.
- Please do not operate the fixture over-current. Permanent damage can occur.
- Do not disassemble the fixture or touch the product’s internal parts. This could result in injury and permanent damage to the fixture. In the event of a malfunction, the fixture should be repaired by a qualified technician.
- Unplug the fixture when not in use.
- Failure to comply with these warning can result in injury and / or cause permanent damage to the fixture.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>