bauhaus SW200 Automatic Swiss Sellita Watch with Date and Leather Strap User Manual
- June 5, 2024
- BAUHAUS
Table of Contents
bauhaus SW200 Automatic Swiss Sellita Watch with Date and Leather Strap
User Manual
WATCH COLLECTION
For lovers of Bauhaus Design, the reduced designs, bold colors and “form follows function” signify the new BAUHAUS brand of watches, derived from the famous German design movement. With this new brand, POINTtec is celebrating the acquisition of the bauhaus-style building with its watch assembly in Ruhla into our family business, after our watch brands ZEPPELIN and IRON ANNIE have been produced there for decades.
Cover photo: Typography by Herbert Bayer for the Bauhaus in Dessau, above the entrance to the workshop block. Jim Hood, May 2005.
SELLITA SW200
DISPLAY. Watch hands 
SETTINGS. Crown 3 positions.
Rapid date and day correction is not possible between 8 p.m. and 2 a.m.
Self-winding of the watch by the movements of the wrist.
SELLITA SW280
DISPLAY. Watch hands
SETTINGS. Crown 3 positions.
Rapid date and day correction is not possible between 8 p.m. and 2 a.m.
Self-winding of the watch by the movements of the wrist.
SELLITA SW290
DISPLAY. Watch hands
SETTINGS. Crown 3 positions
Rapid date and day correction is not possible between 8 p.m. and 2 a.m.
Self-winding of the watch by the movements of the wrist.
CARE INSTRUCTIONS
NOTE: When the watch is stopped – i.e. no longer ticking (hand for power reserve points to MIN) – it must be wound before wearing (approximately 15 turns clockwise in neutral position [ N ]).
The remaining winding process of the automatic watch results from normal arm movement during wearing.
Please do not wear your watch while swimming in seawater.
Saltwater destroys gaskets and insulation of glass, encasement and crown. If
your watch should come into contact with seawater, please rinse it immediately
with clear fresh water.
You should check the functionality of the gasket twice a year regularly.
For additional useful information, visit www.pointtec.de
In case your watch needs to be repaired or to raise claims under a guarantee, please contact the point of sales.
Herstellung & Vertrieb: POINT tec Electronic GmbH Steinheilstraße 6 85737
Ismaning/München
Fax +49 (0)89 96 32 17
www.pointtec.de