BAUHAUS 0108479B Solar Camera User Guide
- June 9, 2024
- BAUHAUS
Table of Contents
BAUHAUS 0108479B Solar Camera User Guide
OVERVIEW
QUICK SETUP
-
DOWNLOAD THE APP
Scan the QR Code on the right, or search S7PRO in the Apple App Store or Google Play Store. Create an account in the App, or login if you already have one.https://t.din.bz/s7pro -
CHARGE AND POWER ON
© Please charge the camera first with the included USB-C charging cable.
The camera will automatically go into Bluetooth connection mode when powering on, with a beep and blue flash of the indicator.
Please add it within the next 5 minutes, or it will enter battery saving mode (You can turn off and turn on the camera again to restart). -
ADD THE CAMERA
Open the Helio Pro App and scan the QR code on the back of the camera. If you have already added other devices to the App, tap ADD ACCESSORY on the Settings page.
The App will list devices scanned by Bluetooth. Click to connect, the camera will beep and the indicator will switch to blue solid. -
CONNECT TO WI-FI
Select the Wi-Fi (2.4 GHz) network you want connect the camera to and enter your Wi-Fi password. After successfully configuring the network, the camera will beep and the indicator light will go out. -
PLACE THE CAMERA
• In order to make full use of solar panel, please try to choose a place where the solar panel will receive maximum sunlight.
• To reduce frequent triggering of the PIR sensor: AVOID facing areas with strong light, temperature changes rapidly or the air stream flows frequently; AVOID facing high-traffic areas.
• Make sure the signal strength is great at the desired location.
• Wall Mounting
-
Turn the knob of the mounting bracket counterclokwise to loosen and disassemble it.
-
Place the mounting bracket against the wall. Drill holes with a 15/64 inch (6mm) drill bit, then insert the anchors into the holes.
© Anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. -
Firmly screw the knob of the mounting bracket into the mounting hole of camera.
-
Hold and screw camera to the mounting bracket. Rotate camera to adjust the view and check it using the live stream which you can access in the Alphahom App.
APP FUNCTIONS
Customize the homepage: Swipe up and tap EDIT on the top of the floating layer.
Shown here is the Cameras-Only Mode. You can also use it with the Alphahom Smart Security System for full protection of your home.
LIVE VIEW
HOW DOES MOTION DETECTION WORK?
PIR Detection
It triggered by objects with a heat source such as humans, animals, cars, even
hot/cold air. With Al detection, humans can identified.
The camera generates 15s of video per trigger, and can be re-triggered after a
70s cooldown .
Records & Notifications
Consecutive triggers only generate one App push to avoid frequent
disturbances.
HOW TO EXTEND THE BATTERY LIFE?
Set a reasonable motion detection time
To reduce the power consumption caused by the camera being woken up
frequently.
[Camera Settings] – [Motion Detection] – [Detection Conditions]
Set the appropriate detection accuracy
If the detection accuracy is set to HIGH, the Al recognition process will
increase power consumption.
[Camera Settings] – [Motion Detection] – [Detection Accuracy]
Reduce App usage time
The system waking up camera each time the App is launched also increases power
consumption.
According to experimental data, the camera can provide approximately 6 months of standby time with less than 5 triggers per day.
HOW TO RESET THE CAMERA?
FEATURES
PERMISSIONS & PRIVACY
SPECIFICATIONS
FCC STATEMENT
This device complies with Part 75 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
⚠ NOTIFICATIONS
The individual parameters, digital description and design in the manual may vary as the device versions are updated.
Please observe the working rules of electrical equipment. Users are not allowed to dismantle the device or replace any part of it. Opening or dismantling the device may cause electric shock.
This device can minimize most of the risks, but it is not guaranteed to prevent burglary, robbery, theft or other types of emergencies. Users should use it reasonably and properly to protect the safety of life or property.
Motion detection: the device uses Al image recognition and heat source induction to improve the accuracy of motion detection and filter invalid alarms as much as possible. Users need to choose the appropriate mobile detection accuracy according to the monitoring site. This device can only detect intrusion in the designated scope and barrier free area, please install it in the position as far as possible.
Network failure, electrical system component failure and other problems may affect the operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>