NYKO 87268 Dualies Motion Controller Set User Manual

NYKO 87268 Dualies Motion Controller Set

WHAT’S IN THE BOX

Left Controller

1.  Right Controller
2.  USB Type-C cable
3.  User Manual

Controllers

HOW TO SYNC TO CONSOLE

1. Go to the Home Screen <fig.1>
2. Click “Controllers” icon, <fig.2>
3. Select “Change Grip/Order config.3>
4. Locate the sync button on the back side of each controller <fig.4
5. RESS& HOLD the SYNC Button for approx. 3 seconds until the 4 LEDs begin blinking.
6. Once the LEDs are blinking, release the SYNC button.
7. The LEDs will blink rapidly while syncing with the console.
8. When the desired controller is synced with the console, the controller icon will appear
9. PRESS L R or “SL SR depending on the desired configuration.
10. When the controllers are connected as desired, PRESS “A” to exit the “Change Grip/Order menu. cfig.7>

HOW TO WAKE UP DUALIES

• For LEFT Controller
  PRESS & HOLD any of the following buttons VA()or(ZL) for approx. 2 seconds to wake up the LEFT Dualie.

• For RIGHT Controller
  PRESS& HOLD any of the following buttons (A). (B), (X). (Y. R) or (ZR) for approx 2 seconds to wake up the RIGHT Dualle.

HOW TO SET UP TURBO FIRE

1. PRESS& HOLD the Turbo Button
2.  While holding the Turbo Button, press the desired button to activate Turbo Fire. An LED will illuminate next to the Turbo button, indicating Turbo is active.
3.  The LED will illuminate when the button with Turbo Fire is pressed. Please Note: Turbo Fire can be configured onto multiple buttons simultaneously
4.  To add Turbo Fire to another button, follow the same steps above
5.  PRESS& HOLD the Turbo Buton while pressing the desired button to activate.

HOW TO DISABLE A TURB0 FIRE SETTING

1. PRESS&HOLD the Turbo Button

2. While holding the Turbo Button, press the desired button to deactivate Turbo Fire The LED will not illuminate.

3. To confirm the setting has been cleared, press the button that was deactivated. If the LED does not illuminate, Turbo deactivation was successful.
   CHARGING DUALIES

4. Connect the USB C end of the charging cable to the charge port on the controller

5. Connect the USB-A end to an available AC Adapter (not included), an available US8 port on the dock, or an available USB charge port connected to a power source.

TROUBLESHOOTING:

• Q: Can I use Amilibos?
  A: No, NFC and Amibo@ are not supported in Dualies”.

• Q: Can I use the IR Camera?
  A: No, Dualiesdoes do not support this feature.

• Q: Can I use Dualies in Handheld Mode?
  A: No, Dualies cannot connect to the rails of the console. We recommend playing in Tabletop Mode or TV Mode.

• Q: Are Dualies compatible with a Joy-Con grip?
  A: No.

TECHNICAL SUPPORT

We appreciate your support of Nyko products and endeavor to guarantee your satisfaction with this purchase. If you are experiencing difficulties, please contact us:

• Online: www.nyko.com
• Email: customersupport@nyko.com
• Phone:+1-888-400-6956

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>