Nyko 87326 PlayPad Glow Wireless Controller User Manual

Nyko 87326 PlayPad Glow Wireless Controller

Thank you for purchasing this Nyko® gaming product. Please read this manual to familiarize yourself with the installation and operation of this device.

OVERVIEW

• A. Turbo button
• B. Capture button
• C. – button
• D. + button
• E. Left Joystick
• F. A/B/X/Y buttons
• G. Directional Pad
• H. Right Joystick
• I. Indicator LEDs
• J. Home button
• K. Type-C charge port
• L. R button
• M. L button
• N. ZR button
• O. M1 button
• P. Right trigger lock
• Q. Left trigger lock
• R. Right Joystick
• S. M2 button
• T. Color Mode button
• U. Reset button

What’s in the box?

• (1) PlayPad Glow™ wireless controller
• (1) USB to USB-C charge cable
• (1) User Manual

Features

• Compatible with N-switch, Android, 105 (MF), and PC platforms.
• The functional buttons of this controller correspond to the button functions of the N-S Pro controller, and it also supports TURBO continuous shooting and M1 M2 programming functions.
• Supports six-axis functionality, providing players with a better gaming experience.
• Dynamic Rub lights
• Dual-mode trigger locks

Using the PlayPad Glow™ with N-Switch (Fig. 3)

1. Turn on the N-S console and go to the main menu.
2. On the main menu, touch the screen to navigate to “Controllers” and select “Change Grip/order.”
3. On the controller, press and hold the “HOME” button for 2 seconds to turn on the controller and enter pairing mode. The LED lights 2 and 3 on the controller will start flashing quickly.
4. When the LED light 2 or 3 becomes solid, it indicates that the controller has successfully paired with the console. Press the A button to confirm the pairing.

If the controller was previously paired with the Switch console and the controller is powered off while the console is on, you can press the HOME button on the controller to reconnect. The LED lights 2 and 3 will flash slowly during the reconnection process, and once reconnected, the corresponding LED light will stay solid.

Using the PlayPad Glow with other devices

1. Android Bluetooth Connection
   • Enable Bluetooth on your Android phone.
   • Press and hold the HOME button on the controller for 2 seconds to enter pairing mode. The LED lights 2 and 3 on the controller will start flashing quickly.
   • When your Android phone detects the “Pro Controller” device, select it to establish the connection. Once connected, the LED light on the controller will stay solid. If already connected before, you can directly press the HOME button, and the LED lights will flash slowly for automatic reconnection.
2. iOS Bluetooth Connection
   • Enable Bluetooth on your iPhone.
   • Press and hold the HÓME button on the controller for 2 seconds to enter pairing mode. The LED lights 2 and 3 on the controller will start flashing quickly.
   • When your iPhone detects the “Pro Controller” device, select it to establish the connection. Once connected, the LED light 1 on the controller will stay solid. If already connected before, you can directly press the HOME button, and the LED lights will flash slowly for automatic reconnection.
3. Laptop Bluetooth Connection
   • Enable Bluetooth on your laptop.
   • Press and hold the HOME button on the controller for 2 seconds to enter pairing mode. The LED lights 2 and 3 on the controller will start flashing quickly.
   • When your laptop detects the “Pro Controller” device, select it to establish the connection. Once connected, the LED light 1 on the controller will stay solid. You can now use the controller to play games on your laptop.
4. PC Wired Connection
   • Connect the controller to your PC using a Type-C cable.
   • Once the PC recognizes the controller, you can start using it to control games. You can use platforms like Steam to enjoy gaming on your PC.

Using the TURBO Function

1. Set up rapid-fire for buttons A, B, X, Y, L, R, ZL, and ZR.
2. Press and hold the function button and press the “TURBO” button once to enable rapid-fire for the corresponding button.
3. Press and hold the function button and “TURBO” again to enable continuous automatic rapid-fire.
4. Press and hold the function button and “TURBO” to disable rapid-fire.

Controller Charging/Sleep/Wake-Up Function

• When the controller is charging while powered off, the LED light 4 will flash slowly and remain solid when
• Wy en charging the controller while in Bluetooth or wired mode, the LED lightwice, asn slowly.
• If the battery is low, the LED light 4 will flash quickly for 1 second, repeating twice.

RGB Light Control

1. The default setting is a seven-colour gradient; 3D ambient light effect with breathing gradient.
2. Pressing the light control button once will fix the current color and stop the gradient; 3D ambient light
3. Pressing the light contre button again will cycle through seven individual colors sequentially (red, green, blue, yellow, cyan, purple, white).
4. Pressing the button again will turn off the lights (pressing again will cycle through).
5. The duration of the light effect is set to 5 minutes. After 5 minutes, the lights will turn off, and to turn them on again, the light control button needs to be pressed again.

Rear Button Programming Function

• There are two programmable buttons on the back of the controller, M1 and M2, with default values:
• Each programming button can be mapped to a single action button or programmed for multiple button inputs (such as A/B/X/Y/L/ZL/R/ZR/L3/R3/Up/Down/Left/Right).
• Each programmable button allows a maximum of 14 key combinations to be set.
• The programmable buttons do not have a TURBO continuous shooting function.
• The programmable buttons have a memory function, so regardless of the controller going into sleep mode, being powered off, or restarted, the controller will remember the last working state.

Rear Button Programming Method (Fig. 4)

1. Press and hold the programmable button (M1 or M2) that needs to be set, along with the “Screenshot” button, for 3 seconds. The LED indicator will flash quickly once, then release the buttons to enter programming mode.

2. Press one or more regular function buttons (such as pressing one or more keys from “A/B/X/Y/L/ZL/R/Z- R/L3/R3/Up/Down/Left/Right” as a combination), then press the corresponding programming button again to confirm and automatically exit, completing the programming setting. The mode indicator light will return to the display state before the setting.

3. Press and hold the “Screenshot” button and the M1 (or M2) button for 3 seconds. After programming starts, if the M1 (or M2) button is not pressed within 50 seconds, the controller will automatically save the programmed key combinations to the M1 (or M2) button and exit programming mode.

4. After successful programming, the programming button will have the same function as the single key or multiple keys that were programmed.

Clearing Programming Button Function

1. Suton, The LED indicator will quickly one, until 7 or M2), and the Screenshot*
2. Press the programmable button that needs to cancel the function again to confirm, and it will automatically exit. The mode indicator light will return to the display state before the setting, clearing the programming button function.

Care and Maintenance

1. Please do not store this product in wet or high-temperature areas.
2. Don’t knap, beat, drub, pierce, or try to decompose this product, to avoid unnecessary damage to the product.
3. Nonprofessional personnel should not disassemble the product, otherwise it will not be covered in the after-sales warranty service.
4. Due to factors beyond our control, such as official software upgrades or changes in source code, some games may be unable to connect and operate with this product. Our company does not assume any responsibility for this. We reserve the right to provide the final interpretation in this matter.

Technical Support

• We appreciate your support of Nyko products and endeavor to guarantee your satisfaction with this purchase.
• If you are experiencing difficulties, please contact us:
• Online: www.nyko.com
• Email: customersupport@nyko.com
• Phone: +1-888-400-6956

WARRANTY

Nyko Product Limited Warranty
This Nyko product is warranted to the original purchaser for the product’s normal intended use for ninety (90) days from the date of purchase. If a defect covered under this warranty occurs, Nyko will replace or repair the product or its defective parts, at Nyko’s option, at no charge. This warranty does not apply to defects resulting from misuse or modification of the product. The product should be returned with proof of purchase, a brief statement of the claimed defect, and the purchaser’s contact information, to: Nyko Technologies, 1642 Westwood BIva., Suite 300, Los Angeles, CA 90024, USA, with freight charges prepaid. Please allow 3-4 weeks for processing.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this product not authorized by Nyko could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product.
This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components, you must use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

The following importer is the responsible party

• Company Name: Nyko Technologies
• Address: 1642 Westwood Blvd., Suite 300, Los Angeles, CA, 90024, USA
• Telephone: +1(310) 446-6602
• www.nyko.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>