Le Veil DCH-BD1 iCigar Bluetooth Adapter Installation Guide
- June 5, 2024
- Le Veil
Table of Contents
Le Veil
Bluetooth Adapter – DCH-BD1
Adapter Installation
- Unplug or turn off the power to the humidifier.
- Insert the adapter into the ‘BD’ port on the humidifier.
- Turn on or plug in the power.
App Installation for iPhone/ iOS
- Search for ‘Cigar Guard’ in the iTunes Store or scan this QR code with the camera of your phone.https://itunes.apple.com/us/app//cigarguard/id1109532936?mt=8
- Install the Cigar Guard app and accept any permission prompts required.
- Turn on the Bluetooth services in your phone’s settings.
- The app will automatically search for any Le Veil Bluetooth adapters in range.
App Installation for Android Phones
- Search for ‘Cigar Guard’ in the Play Store or scan this QR code with your phone’s camera.https://play.google.com/store/apps/details?id=com.humidifier.cigarguard&hl=en
- Install and open the Cigar Guard app.
- Accept the location services permissions prompt or go into the permissions section of your settings and allow the Cigar Guard app location permissions.
- Open the Bluetooth manager and pair the Le Veil Bluetooth Adapter to your phone. If the device prompts for a key use: 0000
- Re-open the Cigar Guard app.
- The app will automatically search for any Le Veil Bluetooth adapters in range.
Compatible For
iCigar Pro………………………DCH-67
iCigar Hybrid………………. DCH-22, 220
iCigar……………………………DCH-12V6
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction