SONBUS SM3690B RS485 Interface Soil Temperature and Ambient Temperature and Humidity Integrated Acquisition Module User Manual
- June 5, 2024
- SONBUS
Table of Contents
SONBUS SM1210B-12 RS485 Bus 12 Channel SHT10 Temperature and Humidity
Sensor
SM1210B-12 using the standard RS485 bus MODBUS-RTU protocol,easy access to PLC，DCS and other instruments or systems for monitoring temperature,humidity@12 state quantities.The internal use of high-precision sensing core and related devices to ensure high reliability and excellent long-term stability,can be customized RS232,RS485,CAN,4-20mA,DC0~5V\10V,ZIGBEE,Lora,WIFI,GPRS and other output methods.
Technical Parameters
| Technical parameter | Parameter value |
|---|---|
| Brand | SONBEST |
| Temperature measuring range | -30℃~80℃ |
| Temperature measuring accuracy | ±0.5℃ @25℃ |
| Support sensor | SHT10 |
| Channels | 12 |
| Input bus | IIC |
| Humidity measuring range | 0~100%RH |
| Humidity measuring accuracy | ±4.5%RH @25℃ |
| Communication Interface | RS485 |
| Default baud rate | 9600 8 n 1 |
| Power | DC9~24V 1A |
| Running temperature | -40~80°C |
Communication Protocol
The product uses RS485 MODBUS-RTU standard protocol format, all operation or
reply commands are hexadecimal data. The default device address is 1 when the
device is shipped, the default baud rate is 9600, 8, n, 1
Read Data (Function id 0x03)
Inquiry frame (hexadecimal), sending example: Query 1# device 1 data, the host
computer sends the command:01 03 00 00 00 0C 45 CF .
| Device ID | Function id | Start Address | Data Length | CRC16 |
|---|---|---|---|---|
| 01 | 03 | 00 00 | 00 0C | 45 CF |
For the correct query frame, the device will respond with data:01 03 18 00 79 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 A5 E8 , the response format is parsed as follows:
Device
ID
| Function
id
| Data
Length
| 数
据 1
| 数
据 2
| 数
据 3
| 数
据 4
| 数
据 5
| 数
据 6
| | | | | | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
01| 03| 18| 00
79
| 00
7A
| 00
7B
| 00
7C
| 00
7D
| 00
7E
| | | | | | |
| Address | Start Address | Description | Data type | Value range |
|---|---|---|---|---|
| 40001 | 00 00 | 1#temperatureregister | Read only | 0~65535 |
| 40002 | 00 01 | 2#humidityregister | Read only | 0~65535 |
| 40003 | 00 02 | 3#temperatureregister | Read only | 0~65535 |
| 40004 | 00 03 | 4#humidityregister | Read only | 0~65535 |
| 40005 | 00 04 | 5#temperatureregister | Read only | 0~65535 |
| 40006 | 00 05 | 6#humidityregister | Read only | 0~65535 |
| … | … | … | … | … |
| 40023 | 00 16 | 23#temperatureregister | Read only | 0~65535 |
| --- | --- | --- | --- | --- |
| 40024 | 00 17 | 24#humidityregister | Read only | 0~65535 |
| 40101 | 00 64 | model code | read/write | 0~65535 |
| 40102 | 00 65 | total points | read/write | 1~20 |
| 40103 | 00 66 | Device ID | read/write | 1~249 |
| 40104 | 00 67 | baud rate | read/write | 0~6 |
| 40105 | 00 68 | mode | read/write | 1~4 |
| 40106 | 00 69 | protocol | read/write | 1~10 |
Data Address Table
| Device ID | Function id | Start Address | Data Length | CRC16 |
|---|---|---|---|---|
| FA | 03 | 00 64 | 00 02 | 90 5F |
read and modify device address
Read or query device address
If you don’t know the current device address and there is only one device on
the bus, you can use the command FA 03 00 64 00 02 90 5F Query device address.
| Device ID | Function id | Start Address | Model Code | CRC16 |
|---|---|---|---|---|
| 01 | 03 | 02 | 55 3C 00 01 | 3A 79 |
FA is 250 for the general address. When you don’t know the address, you can
use 250 to get the real device address, 00 64 is the device model register.
For the correct query command, the device will respond, for example the
response data is: 01 03 02 07 12 3A 79, the format of which is as shown in the
following table:
| Device ID | Function id | Start Address | Destination | CRC16 |
|---|---|---|---|---|
| 01 | 06 | 00 66 | 00 02 | E8 14 |
Response should be in the data, the first byte 01 indicates that the real address of the current device is, 55 3C converted to decimal 20182 indicates that the current device main model is 21820, the last two bytes 00 01 Indicates that the device has a status quantity.
Change device address
For example, if the current device address is 1, we want to change to 02, the
command is:01 06 00 66
| Device ID | Function id | Start Address | Destination | CRC16 |
|---|---|---|---|---|
| 01 | 06 | 00 66 | 00 02 | E8 27 |
Response should be in the data, after the modification is successful, the first byte is the new device address. After the general device address is changed, it will take effect immediately. At this time, the user needs to change the query command of the software at the same time.
| Device ID | Function id | Start Address | Data Length | CRC16 |
|---|---|---|---|---|
| 01 | 03 | 00 67 | 00 01 | 35 D5 |
Read and Modify Baud Rate
Read baud rate
The device default factory baud rate is 9600. If you need to change it, you
can change it according to the following table and the corresponding
communication protocol. For example, read the current device’s baud rate ID,
the command is:01 03 00 67 00 01 35 D5 , its format is parsed as follows.
| Device ID | Function id | Data Length | Rate ID | CRC16 |
|---|---|---|---|---|
| 01 | 03 | 02 | 00 03 | F8 45 |
Read the baud rate encoding of the current device. Baud rate encoding: 1 is 2400; 2 is 4800; 3 is 9600; 4 is 19200; 5 is 38400; 6 is 115200. For the correct query command, the device will respond, for example the response data is: 01 03 02 00 03 F8 45, the format of which is as shown in the following table:
| Device ID | Function id | Start Address | Target Baud Rate | CRC16 |
|---|---|---|---|---|
| 01 | 03 | 00 66 | 00 01 | 64 15 |
For example, changing the baud rate from 9600 to 38400, ie changing the code from 3 to 5, the command is: 01 06 00 67 00 05 F8 1601 03 00 66 00 01 64 15 .
| Device ID | Function id | Start Address | Data Length | CRC16 |
|---|---|---|---|---|
| 01 | 03 | 00 6B | 00 01 | F5 D6 |
Change the baud rate from 9600 to 38400, changing the code from 3 to 5. The new baud rate will take effect immediately, at which point the device will lose its response and the baud rate of the device should be queried accordingly. Modified.
| Device ID | Function id | Data Length | Data value | CRC16 |
|---|---|---|---|---|
| 01 | 03 | 02 | 00 64 | B9 AF |
by adjusting the correction value. The correction difference can be modified to be plus or minus 1000, that is, the value range is 0-1000 or 64535 -65535. For example, when the display value is too small, we can correct it by adding 100. The command is: 01 03 00 6B 00 01 F5 D6 . In the command 100 is hex 0x64 If you need to reduce, you can set a negative value, such as -100, corresponding to the hexadecimal value of FF 9C, which is calculated as 100-65535=65435, and then converted to hexadecimal to 0x FF 9C. The correction value starts from 00 6B. We take the first parameter as an example. The correction value is read and modified in the same way for multiple parameters.
| Device ID | Function id | Start Address | Destination | CRC16 |
|---|---|---|---|---|
| 01 | 06 | 00 6B | 00 64 | F9 FD |
Contact Us
- Company: Shanghai Sonbest Industrial Co., Ltd
- Address:Building 8,No.215 North east road,Baoshan District,Shanghai,China Web: http://www.sonbest.com
- Web: http://www.sonbus.com
- SKYPE: soobuu
- Email: sale@sonbest.com
- Tel: 86-021-51083595 / 66862055 / 66862075 / 66861077
References
- Home-上海æœåšå®žä¸šæœ‰é™å…¬å¸
- Home-SONBEST -SONBUS.COM| THE SENSOR COMPANY
- Home-SONBEST -SONBUS.COM| THE SENSOR COMPANY